+0
Downloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 5538602 |
| Ref. ISO Catalogue | TCF080308DPV36 |
| Ref. ANSI Catalogue | TCF080308DPV36 |
| Nuance | WU40PH |
| [D] Taille de plaquette CI | 8.08 mm |
| [D] Taille de plaquette CI | .318 in |
| [D1] Taille du trou de la plaquette | 2.8 mm |
| [D1] Taille du trou de la plaquette | .11 in |
| [W] Largeur de coupe | 8.6 mm |
| [W] Largeur de coupe | .339 in |
| [S] Épaisseur de la plaquette | 3 mm |
| [S] Épaisseur de la plaquette | .118 in |
| [RR] Rayon de bec | 0.8 mm |
| [RR] Rayon de bec | .031 in |
| Dimension de plaquette | D |
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Material Group | Geometry | Light | General | Heavy | |||
| periphery | center | periphery | center | periphery | center | ||
| P1 | V38/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P2–P4 | V34/DU | WPK10CH | WU40PH/WU20PH | WU25CH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P5–P6 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| M1–M3 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| K1–K3 | V34/DU | WPK10CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| N1–N4 | V36 | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH |
| S1–S4 | V38/DU | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| Recommended Feed Rate per Revolution | |||||||||||
| Material | Geometry | Grade | Cutting Speed | Tool | 12,00 | 14,00 | 19,00 | 24,00 | |||
| center | periphery | Min | Start | Max | |||||||
| P0 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 |
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0,07–0,10 | 0,08–0,10 | |
| P1 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 |
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0,07–0,11 | 0,08–0,11 | |
| P2 | –V34 | WU40PH | WU25CH | 120 | 190 | 280 | mm/rev | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 |
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0,07–0,12 | 0,08–0,13 | |
| P3 | –V34 | WU40PH | WPK10CH | 120 | 200 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0,08–0,13 | 0,09–0,15 | |
| P4 | –V34 | WU40PH | WPK10CH | 120 | 190 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0,08–0,13 | 0,09–0,15 | |
| P5 | –V36 | WU40PH | WU25CH | 120 | 180 | 250 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0,07–0,11 | 0,08–0,12 | |
| P6 | -V36 | WU40PH | WU25CH | 120 | 160 | 210 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/rev | – | – | 0,07–0,11 | 0,08–0,12 | |
| M1 | -V38 | WU40PH | WU40PH | 120 | 160 | 240 | mm/rev | 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/rev | – | – | 0,06–0,09 | 0,07–0,10 | |
| M2 | –V38 | WU40PH | WU40PH | 110 | 140 | 210 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/rev | – | – | 0,06–0,09 | 0,07–0,10 | |
| M3 | -V36 | WU40PH | WU40PH | 100 | 120 | 200 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/rev | – | – | 0,06–0,09 | 0,07–0,10 | |
| K1 | -V34 | WU25CH | WPK10CH | 120 | 200 | 280 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0,07–0,13 | 0,09–0,18 | |
| K2 | –V34 | WU40PH | WPK10CH | 100 | 180 | 260 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/rev | – | – | 0,07–0,13 | 0,09–0,18 | |
| K3 | -V34 | WU40PH | WPK10CH | 100 | 170 | 240 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/rev | – | – | 0,07–0,13 | 0,09–0,18 | |
| N1 | -V36 | WN10PH | WN10PH | 250 | 350 | 500 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N2 | –V36 | WN10PH | WN10PH | 150 | 300 | 450 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N3 | -V36 | WN10PH | WN10PH | 80 | 120 | 150 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| S3 | -V38 | WU40PH | WU40PH | 20 | 30 | 45 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 |
| –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/rev | – | – | 0,07–0,11 | 0,09–0,14 | |
| S4 | –V38 | WU40PH | WU40PH | 35 | 40 | 65 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10 –0,15 | 0,12–0,19 |
| –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/rev | – | – | 0,07–0,11 | 0,09–0,14 | |
| Material | Geometry | Grade | Cutting Speed | Tool | 30,00 | 37,00 | 46,00 | 57,00 | |||
| center | periphery | Min | Start | Max | |||||||
| P0 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,13–0,16 | 0,15–0,18 | 0,16–0,23 | 0,17–0,24 |
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/rev | 0,09–0,12 | 0,11–0,13 | – | – | |
| P1 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,13–0,17 | 0,15–0,19 | 0,16–0,24 | 0,17–0,25 |
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/rev | 0,09–0,13 | 0,11–0,14 | – | – | |
| P2 | –V34 | WU40PH | WU25CH | 120 | 190 | 280 | mm/rev | 0,13–0,20 | 0,15–0,21 | 0,16–0,28 | 0,17–0,30 |
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | 0,09–0,15 | 0,11–0,15 | – | – | |
| P3 | –V34 | WU40PH | WPK10CH | 120 | 200 | 310 | mm/rev | 0,16–0,24 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 |
| –DU | WU20PH | WU20PH | 90 | 160 | 250 | mm/rev | 0,12–0,16 | 0,12–0,18 | – | – | |
| P4 | –V34 | WU40PH | WPK10CH | 120 | 190 | 310 | mm/rev | 0,14–0,22 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 |
| –DU | WU20PH | WU20PH | 90 | 150 | 250 | mm/rev | 0,12–0,16 | 0,12–0,18 | – | – | |
| P5 | –V36 | WU40PH | WU25CH | 120 | 180 | 250 | mm/rev | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 |
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/rev | 0,09–0,13 | 0,11–0,15 | – | – | |
| P6 | -V36 | WU40PH | WU25CH | 120 | 160 | 210 | mm/rev | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,29 |
| –DU | WU20PH | WU20PH | 90 | 120 | 160 | mm/rev | 0,09–0,13 | 0,11–0,15 | – | – | |
| M1 | -V38 | WU40PH | WU40PH | 120 | 160 | 240 | mm/rev | 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 |
| –DU | WU20PH | WU20PH | 90 | 120 | 190 | mm/rev | 0,09–0,13 | 0,10–0,15 | – | – | |
| M2 | –V38 | WU40PH | WU40PH | 110 | 140 | 210 | mm/rev | 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 |
| –DU | WU20PH | WU20PH | 90 | 110 | 160 | mm/rev | 0,09–0,13 | 0,10–0,15 | – | – | |
| M3 | -V36 | WU40PH | WU40PH | 100 | 120 | 200 | mm/rev | 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 |
| –DU | WU20PH | WU20PH | 80 | 90 | 160 | mm/rev | 0,09–0,13 | 0,10–0,15 | – | – | |
| K1 | -V34 | WU25CH | WPK10CH | 120 | 200 | 280 | mm/rev | 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 |
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | 0,10–0,19 | 0,12–0,22 | – | – | |
| K2 | –V34 | WU40PH | WPK10CH | 100 | 180 | 260 | mm/rev | 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 |
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/rev | 0,10–0,19 | 0,12–0,22 | – | – | |
| K3 | -V34 | WU40PH | WPK10CH | 100 | 170 | 240 | mm/rev | 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 |
| –DU | WU20PH | WU20PH | 80 | 130 | 190 | mm/rev | 0,10–0,19 | 0,12–0,22 | – | – | |
| N1 | -V36 | WN10PH | WN10PH | 250 | 350 | 500 | mm/rev | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 |
| N2 | –V36 | WN10PH | WN10PH | 150 | 300 | 450 | mm/rev | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 |
| N3 | -V36 | WN10PH | WN10PH | 80 | 120 | 150 | mm/rev | 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 |
| S3 | -V38 | WU40PH | WU40PH | 20 | 30 | 45 | mm/rev | 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 |
| –DU | WU20PH | WU20PH | 20 | 25 | 40 | mm/rev | 0,10–0,15 | 0,12–0,18 | – | – | |
| S4 | –V38 | WU40PH | WU40PH | 35 | 40 | 65 | mm/rev | 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 |
| –DU | WU20PH | WU20PH | 30 | 35 | 50 | mm/rev | 0,10–0,15 | 0,12–0,18 | – | – | |
| Avanzamento al giro consigliato | |||||||||||
| Grade | Cutting Speed | ||||||||||
| Material | Geometry | center | periphery | Min | Start | Max | Tool | 12,00 | 14,00 | 19,00 | 24,00 |
| P0 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 |
| P0 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.10 | 0.08–0.10 |
| P1 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 |
| P1 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.11 | 0.08–0.11 |
| P2 | –V34 | WU40PH | WU25CH | 120 | 190 | 280 | mm/rev | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 |
| P2 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.12 | 0.08–0.13 |
| P3 | –V34 | WU40PH | WPK10CH | 120 | 200 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P3 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P4 | –V34 | WU40PH | WPK10CH | 120 | 190 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P4 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P5 | –V36 | WU40PH | WU25CH | 120 | 180 | 250 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P5 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| P6 | -V36 | WU40PH | WU25CH | 120 | 160 | 210 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P6 | –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| M1 | -V38 | WU40PH | WU40PH | 120 | 160 | 240 | mm/rev | 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M1 | –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M2 | –V38 | WU40PH | WU40PH | 110 | 140 | 210 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M2 | –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M3 | -V36 | WU40PH | WU40PH | 100 | 120 | 200 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M3 | –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| K1 | -V34 | WU25CH | WPK10CH | 120 | 200 | 280 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K1 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K2 | –V34 | WU40PH | WPK10CH | 100 | 180 | 260 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K2 | –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K3 | -V34 | WU40PH | WPK10CH | 100 | 170 | 240 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K3 | –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| N1 | -V36 | WN10PH | WN10PH | 250 | 350 | 500 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N2 | –V36 | WN10PH | WN10PH | 150 | 300 | 450 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N3 | -V36 | WN10PH | WN10PH | 80 | 120 | 150 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| S3 | -V38 | WU40PH | WU40PH | 20 | 30 | 45 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 |
| S3 | –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| S4 | –V38 | WU40PH | WU40PH | 35 | 40 | 65 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10 –0,15 | 0,12–0,19 |
| S4 | –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| Insert size | Diameter range mm (in) | 2 x D/3 x D | 4 x D | 5 x D | ||||||
| X-offset value max. in mm (max. in inch) | D1 max value mm (in) | Hole tolerance mm (in) | X-offset value max. in mm (max. in inch) | D1 max value mm (in) | Hole tolerance mm (in) | X-offset value max. in mm (max. in inch) | D1 max value mm (in) | Hole tolerance mm (in) | ||
| A | 12,00 | 0,5 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | 0,5 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | 0,5 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | 0,8 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | 0,8 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| F | 37,00 | 0,8 | D1 + 1,6mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | 1 | D1 + 2mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | 1 | D1 + 2mm | +/- 0,28 | 0,8 | D1 + 1mm | +/- 0,42 | +/- 0,42 | ||
| Insert size | Diameter Range (mm) | 2 x D and 3 x D | 4 x D | 5 x D | |||
| X-offset value | D1 max | X-offset value | D1 max | X-offset | D1 max | ||
| A | 12,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| B | 14,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| C | 19,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| D | 24,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| E | 30,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| F | 37,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| G | 46,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| H | 57,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| Insert size | Diameter range mm (in) | 2 x D/3 x D | 4 x D | 5 x D | |||||
| D1 max value mm (in) | Hole tolerance mm (in) | X-offset value max. in mm (max. in inch) | D1 max value mm (in) | Hole tolerance mm (in) | X-offset value max. in mm (max. in inch) | D1 max value mm (in) | Hole tolerance mm (in) | ||
| A | 12,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| F | 37,00 | D1 + 1,6mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | D1 + 2mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | D1 + 2mm | +/- 0,28 | 0,8 | D1 + 1mm | +/- 0,42 | +/- 0,42 | ||
| Material | Geometry | Grade | Cutting Speed | Tool | 1.188 | 1.469 | 1.813 | 2.250 | |||
| center | periphery | Min | Start | Max | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0051–0.0063 | 0.0059–0.0071 | 0.0063–0.0091 | 0.0067–0.0094 |
| – DU | WU20PH | WU20PH | 290 | 430 | 624 | IPR | 0.0040–0.0050 | 0.0047–0.0057 | – | – | |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0051–0.0071 | 0.0059–0.0079 | 0.0063–0.0106 | 0.0067–0.0114 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | 0.0040–0.0057 | 0.0047–0.0063 | – | – | |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0.0051–0.0079 | 0.0059–0.0083 | 0.0063–0.0110 | 0.0067–0.0118 |
| – DU | WU20PH | WU20PH | 290 | 450 | 675 | IPR | 0.0040–0.0063 | 0.0047–0.0063 | – | – | |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0.0053–0.0094 | 0.0063–0.0094 | 0.0071–0.0118 | 0.0075–0.0126 |
| – DU | WU20PH | WU20PH | 290 | 480 | 745 | IPR | 0.0042–0.0075 | 0.0050–0.0075 | – | – | |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0.0055–0.0087 | 0.0063–0.0094 | 0.0071–0.0118 | 0.0075–0.0126 |
| – DU | WU20PH | WU20PH | 290 | 450 | 745 | IPR | 0.0044–0.0069 | 0.0050–0.0075 | – | – | |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0.0051–0.0071 | 0.0059–0.0079 | 0.0063–0.0110 | 0.0067–0.0118 |
| – DU | WU20PH | WU20PH | 290 | 430 | 600 | IPR | 0.0040–0.0057 | 0.0047–0.0063 | – | – | |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0.0051–0.0071 | 0.0059–0.0079 | 0.0063–0.0110 | 0.0067–0.0114 |
| - DU | WU20PH | WU20PH | 290 | 380 | 500 | IPR | 0.0040-0.0057 | 0.0047-0.0063 | - | - | |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | 0.0063–0.0118 |
| - DU | WU20PH | WU20PH | 290 | 385 | 575 | IPR | 0.0038-0.0063 | 0.0044-0.0078 | - | - | |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | 0.0063–0.0118 |
| – DU | WU20PH | WU20PH | 265 | 330 | 500 | IPR | 0.0038–0.0063 | 0.0044–0.0078 | – | – | |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0.0047–0.0079 | 0.0055–0.0098 | 0.0063–0.0110 | 0.0063–0.0118 |
| - DU | WU20PH | WU20PH | 240 | 290 | 480 | IPR | 0.0038-0.0063 | 0.0044-0.0098 | - | - | |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0.0055–0.0102 | 0.0063–0.0118 | 0.0071–0.0126 | 0.0079–0.0142 |
| - DU | WU20PH | WU20PH | 290 | 480 | 670 | IPR | 0.0044-0.0081 | 0.0050-0.0094 | - | - | |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0.0055–0.0102 | 0.0063–0.0118 | 0.0071–0.0126 | 0.0079–0.0142 |
| – DU | WU20PH | WU20PH | 240 | 430 | 625 | IPR | 0.0044–0.0081 | 0.0050–0.0094 | – | – | |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0.0055–0.0102 | 0.0063–0.0118 | 0.0071–0.0126 | 0.0079–0.0142 |
| - DU | WU20PH | WU20PH | 240 | 400 | 575 | IPR | 0.0044-0.0081 | 0.0050-0.0094 | - | - | |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0.0051–0.0071 | 0.0059–0.0079 | 0.0063–0.0110 | 0.0067–0.0118 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0.0051–0.0071 | 0.0059–0.0079 | 0.0063–0.0110 | 0.0067–0.0118 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0.0047–0.0067 | 0.0055–0.0083 | 0.0063–0.0091 | 0.0063–0.0094 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0.0055–0.0083 | 0.0063–0.0094 | 0.0071–0.0102 | 0.0079–0.0118 |
| - DU | WU20PH | WU20PH | 50 | 70 | 100 | IPR | 0.0044-0.083 | 0.0050-0.0075 | - | - | |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0.0055–0.0083 | 0.0063–0.0094 | 0.0071–0.0102 | 0.0079–0.0118 |
| – DU | WU20PH | WU20PH | 85 | 95 | 150 | IPR | 0.0044–0.0664 | 0.0050–0.0075 | – | – | |
| Recommended Feed Rate per Revolution | |||||||||||
| Material | Geometry | Grade | Cutting Speed | Tool | .473 | .563 | .750 | .969 | |||
| center | periphery | Min | Start | Max | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0031 | 0.0031–0.0043 | 0.0039–0.0051 | 0.0043–0.0055 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0041 | 0.0034–0.0044 | |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0039 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0.0024–0.0039 | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0067 |
| – DU | WU20PH | WU20PH | 290 | 450 | 675 | IPR | – | – | 0.0031–0.0050 | 0.0034–0.0054 | |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 480 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 450 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 600 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| -V36 | WU40PH | WU25CH | 290 | 385 | 500 | IPR | - | - | 0.0031-0.0047 | 0.0034-0.0050 | |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 290 | 385 | 575 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| – DU | WU20PH | WU20PH | 265 | 340 | 500 | IPR | – | – | 0.0025–0.0047 | 0.0031–0.0050 | |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 240 | 290 | 480 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 290 | 480 | 675 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| – DU | WU20PH | WU20PH | 240 | 430 | 625 | IPR | – | – | 0.0031–0.0057 | 0.0038–0.0075 | |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 240 | 400 | 575 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0.0024–0.0039 | 0.0028–0.0043 | 0.0031–0.0047 | 0.0039–0.0055 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| - DU | WU20PH | WU20PH | 50 | 70 | 100 | IPR | - | - | 0.0031-0.0047 | 0.0038-0.006 | |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| – DU | WU20PH | WU20PH | 85 | 95 | 150 | IPR | – | – | 0.0031–0.0047 | 0.0038–0.006 | |
| Recommended Feed Rate per Revolution | |||||||||||
| Material | Geometry | Grade | Cutting Speed | Tool | .473 | .563 | .750 | .969 | |||
| center | periphery | Min | Start | Max | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0031 | 0.0031–0.0043 | 0.0039–0.0051 | 0.0043–0.0055 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0041 | 0.0034–0.0044 | |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0039 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0.0024–0.0039 | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0067 |
| – DU | WU20PH | WU20PH | 290 | 450 | 675 | IPR | – | – | 0.0031–0.0050 | 0.0034–0.0054 | |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 480 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 450 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 600 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| -V36 | WU40PH | WU25CH | 290 | 385 | 500 | IPR | - | - | 0.0031-0.0047 | 0.0034-0.0050 | |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 290 | 385 | 575 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| – DU | WU20PH | WU20PH | 265 | 340 | 500 | IPR | – | – | 0.0025–0.0047 | 0.0031–0.0050 | |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 240 | 290 | 480 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 290 | 480 | 675 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| – DU | WU20PH | WU20PH | 240 | 430 | 625 | IPR | – | – | 0.0031–0.0057 | 0.0038–0.0075 | |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 240 | 400 | 575 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0.0024–0.0039 | 0.0028–0.0043 | 0.0031–0.0047 | 0.0039–0.0055 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| - DU | WU20PH | WU20PH | 50 | 70 | 100 | IPR | - | - | 0.0031-0.0047 | 0.0038-0.006 | |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| – DU | WU20PH | WU20PH | 85 | 95 | 150 | IPR | – | – | 0.0031–0.0047 | 0.0038–0.006 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?