Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Nummer | 5541818 |
| ISO Katalog Nummer | TCF040203ACV34 |
| ANSI Katalog Nummer | TCF040203ACV34 |
| Sorte | WU40PH |
| [D] Wendeschneidplatten-Größe (Inkreis) | 4.47 mm |
| [D] Wendeschneidplatten-Größe (Inkreis) | .176 in |
| [D1] Wendeschneidplatte Bohrungsgröße | 2.1 mm |
| [D1] Wendeschneidplatte Bohrungsgröße | .083 in |
| [W] Schnittbreite | 3.65 mm |
| [W] Schnittbreite | .144 in |
| [S] Dicke der Wendeschneidplatte | 2 mm |
| [S] Dicke der Wendeschneidplatte | .079 in |
| [RR] Eckenradius | 0.3 mm |
| [RR] Eckenradius | .011 in |
| Wende-schneid-platten-Größe | A |
Grades
WU40PH
Zusammensetzung: Mit einer Mehrlagen-PVD TiN-TiAlN-Beschichtung und einem zähen Substratwidersteht diese Sorte Bearbeitungen mit unterbrochenen Schnitten und sorgt mit ihrer hohen Verschleißfestigkeit für lange Standzeiten.
Anwendung: Aufgrund der hohen Zuverlässigkeit die erste Wahl für die Bearbeitung der meisten Werkstoffe. Diese Sorte sollte wegender schärferen Schneidkanten mit mittleren Schnittgeschwindigkeiten und hohen Vorschüben sowie für Anwendungen verwendet werden, bei denen eine hoheZähigkeit gefordert wird. Sie eignet sich für Werkstoffe wie Stahl, nichtrostenden Stahl und Gusseisenund unter bestimmten Bedingungen auch für hochtemperaturbeständige Legierungen.
Lösung erstellen, um Vorschübe und Geschwindigkeiten zu berechnen
Nachdem Sie eine Lösung erstellt haben, wählen Sie einfach das Symbol für Vorschübe und Geschwindigkeiten und unser System gibt Ihnen Empfehlungen. Sie können die Informationen anpassen, indem Sie Ihre Maschine und Spezifikationen hinzufügen oder Anpassungen mithilfe der Schieberegler vornehmen.
| Werkstoffgruppe | Geometrie | Leichte Bearbeitung | Allgemeine Anwendung | Schruppbearbeitung | |||
| Wende- schneidplatte Außen | Wende- schneidplatte Innen | Wende- schneidplatte Außen | Wende- schneidplatte Innen | Wende- schneidplatte Außen | Wende- schneidplatte Innen | ||
| P1 | V38/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P2–P4 | V34/DU | WPK10CH | WU40PH/WU20PH | WU25CH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P5–P6 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| M1–M3 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| K1–K3 | V34/DU | WPK10CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| N1–N4 | V36 | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH |
| S1–S4 | V38/DU | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| Werkstoffgruppe | Geometrie | Sorte | Schnittgeschwindigkeit | Werkzeugdurchmesser | |||||||
| innen | außen | Min. | Startwert | Max. | |||||||
| –V38 | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/U | – | – | 0,07–0,10 | 0,08–0,10 | |
| –V38 | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/U | – | – | 0,07–0,11 | 0,08–0,11 | |
| –V34 | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/U | – | – | 0,07–0,12 | 0,08–0,13 | |
| –V34 | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 | |||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/U | – | – | 0,08–0,13 | 0,09–0,15 | |
| –V34 | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/U | – | – | 0,08–0,13 | 0,09–0,15 | |
| –V36 | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/U | – | – | 0,07–0,11 | 0,08–0,12 | |
| 0,06-0,10 | 0,08-0,14 | 0,10-0,15 | 0,11-0,16 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/U | – | – | 0,07-0,11 | 0,08-0,12 | |
| 0,06-0,11 | 0,07-0,11 | 0,08-0,12 | 0,10-0,14 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/U | – | – | 0,06-0,09 | 0,07-0,10 | |
| –V38 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | |||||||
| –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/U | – | – | 0,06–0,09 | 0,07–0,10 | |
| 0,06-0,10 | 0,07-0,11 | 0,08-0,12 | 0,10-0,14 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/U | – | – | 0,06-0,09 | 0,07-0,10 | |
| 0,08-0,14 | 0,08-0,16 | 0,10-0,18 | 0,12-0,24 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/U | – | – | 0,07-0,13 | 0,09-0,18 | |
| –V34 | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | |||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/U | – | – | 0,07–0,13 | 0,09–0,18 | |
| 0,08-0,14 | 0,08-0,16 | 0,10-0,18 | 0,12-0,24 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/U | – | – | 0,07-0,13 | 0,09-0,18 | |
| 0,06-0,10 | 0,08-0,14 | 0,10-0,15 | 0,11-0,16 | ||||||||
| –V36 | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | |||||||
| 0,06-0,10 | 0,07-0,11 | 0,08-0,12 | 0,10-0,14 | ||||||||
| 0,08-0,12 | 0,08-0,13 | 0,10-0,15 | 0,12-0,19 | ||||||||
| –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/U | – | – | 0,07-0,11 | 0,09-0,14 | |
| –V38 | 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 | |||||||
| –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/U | – | – | 0,07–0,11 | 0,09–0,14 | |
| Werkstoffgruppe | Geometrie | Sorte | Schnittgeschwindigkeit | Werkzeugdurchmesser | |||||||
| innen | außen | Min. | Startwert | Max. | |||||||
| –V38 | 0,13–0,16 | 0,15–0,18 | 0,16–0,23 | 0,17–0,24 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/U | 0,09–0,12 | 0,11–0,13 | – | – | |
| –V38 | 0,13–0,17 | 0,15–0,19 | 0,16–0,24 | 0,17–0,25 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/U | 0,09–0,13 | 0,11–0,14 | – | – | |
| –V34 | 0,13–0,20 | 0,15–0,21 | 0,16–0,28 | 0,17–0,30 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/U | 0,09–0,15 | 0,11–0,15 | – | – | |
| –V34 | 0,16–0,24 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 | |||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 250 | mm/U | 0,12–0,16 | 0,12–0,18 | – | – | |
| –V34 | 0,14–0,22 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 250 | mm/U | 0,12–0,16 | 0,12–0,18 | – | – | |
| –V36 | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/U | 0,09–0,13 | 0,11–0,15 | – | – | |
| 0,13-0,18 | 0,15–0,20 | 0,16-0,28 | 0,17–0,29 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 120 | 160 | mm/U | 0,09-0,13 | 0,11-0,15 | – | – | |
| 0,12-0,17 | 0,14-0,21 | 0,16-0,23 | 0,16-0,24 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 120 | 190 | mm/U | 0,09-0,13 | 0,10-0,15 | – | – | |
| –V38 | 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | |||||||
| –DU | WU20PH | WU20PH | 90 | 110 | 160 | mm/U | 0,09–0,13 | 0,10–0,15 | – | – | |
| 0,12-0,17 | 0,14-0,21 | 0,16-0,23 | 0,16-0,24 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 90 | 160 | mm/U | 0,09-0,13 | 0,10-0,15 | – | – | |
| 0,14-0,26 | 0,16-0,30 | 0,18-0,32 | 0,20-0,36 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/U | 0,10-0,19 | 0,12-0,22 | – | – | |
| –V34 | 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | |||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/U | 0,10–0,19 | 0,12–0,22 | – | – | |
| 0,14-0,26 | 0,16-0,30 | 0,18-0,32 | 0,20-0,36 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 130 | 190 | mm/U | 0,10-0,19 | 0,12-0,22 | – | – | |
| 0,13-0,18 | 0,15–0,20 | 0,16-0,28 | 0,17-0,30 | ||||||||
| –V36 | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | |||||||
| 0,12-0,17 | 0,14-0,21 | 0,16-0,23 | 0,16-0,24 | ||||||||
| 0,14-0,21 | 0,16-0,24 | 0,18-0,26 | 0,20-0,30 | ||||||||
| –DU | WU20PH | WU20PH | 20 | 25 | 40 | mm/U | 0,10-0,15 | 0,12-0,18 | – | – | |
| –V38 | 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 | |||||||
| –DU | WU20PH | WU20PH | 30 | 35 | 50 | mm/U | 0,10–0,15 | 0,12–0,18 | – | – | |
| Avanzamento al giro consigliato | |||||||||||
| Sorte | Schnittgeschwindigkeit | ||||||||||
| Werkstoffgruppe | Geometrie | innen | außen | Min. | Startwert | Max. | Werkzeugdurchmesser | 12,00 | 14,00 | 19,00 | 24,00 |
| P0 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 |
| P0 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.10 | 0.08–0.10 |
| P1 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 |
| P1 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.11 | 0.08–0.11 |
| P2 | –V34 | WU40PH | WU25CH | 120 | 190 | 280 | mm/rev | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 |
| P2 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.12 | 0.08–0.13 |
| P3 | –V34 | WU40PH | WPK10CH | 120 | 200 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P3 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P4 | –V34 | WU40PH | WPK10CH | 120 | 190 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P4 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P5 | –V36 | WU40PH | WU25CH | 120 | 180 | 250 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P5 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| P6 | -V36 | WU40PH | WU25CH | 120 | 160 | 210 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P6 | –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| M1 | -V38 | WU40PH | WU40PH | 120 | 160 | 240 | mm/rev | 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M1 | –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M2 | –V38 | WU40PH | WU40PH | 110 | 140 | 210 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M2 | –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M3 | -V36 | WU40PH | WU40PH | 100 | 120 | 200 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M3 | –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| K1 | -V34 | WU25CH | WPK10CH | 120 | 200 | 280 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K1 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K2 | –V34 | WU40PH | WPK10CH | 100 | 180 | 260 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K2 | –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K3 | -V34 | WU40PH | WPK10CH | 100 | 170 | 240 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K3 | –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| N1 | -V36 | WN10PH | WN10PH | 250 | 350 | 500 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N2 | –V36 | WN10PH | WN10PH | 150 | 300 | 450 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N3 | -V36 | WN10PH | WN10PH | 80 | 120 | 150 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| S3 | -V38 | WU40PH | WU40PH | 20 | 30 | 45 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 |
| S3 | –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| S4 | –V38 | WU40PH | WU40PH | 35 | 40 | 65 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10 –0,15 | 0,12–0,19 |
| S4 | –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| Wendeschneidplatten-Größe | Durchmesser- bereich mm (in) | 2 x D/3 x D | 4 x D | 5 x D | ||||||
| X-Offset- wert max. in mm (max. in Zoll) | D1 max. Wert mm (in) | Bohrungs- toleranz mm (in) | X-Offset- wert max. in mm (max. in Zoll) | D1 max. Wert mm (in) | Bohrungs- toleranz mm (in) | X-Offset- wert max. in mm (max. in Zoll) | D1 max. Wert mm (in) | Bohrungs- toleranz mm (in) | ||
| A | 12,00 | 0,5 | D1 + 1 mm | +/-0,20 | 0,5 | D1 + 1 mm | +/-0,35 | +/-0,35 | ||
| B | 14,00 | 0,5 | D1 + 1 mm | +/-0,20 | 0,5 | D1 + 1 mm | +/-0,35 | +/-0,35 | ||
| C | 19,00 | 0,5 | D1 + 1 mm | +/-0,20 | 0,5 | D1 + 1 mm | +/-0,35 | +/-0,35 | ||
| D | 24,00 | 0,8 | D1 + 1,6 mm | +/-0,20 | 0,8 | D1 + 1 mm | +/-0,35 | +/-0,35 | ||
| E | 30,00 | 0,8 | D1 + 1,6 mm | +/-0,20 | 0,8 | D1 + 1 mm | +/-0,35 | +/-0,35 | ||
| F | 37,00 | 0,8 | D1 + 1,6 mm | +/-0,25 | 0,8 | D1 + 1 mm | +/-0,38 | +/-0,38 | ||
| G | 46,00 | 1 | D1 + 2 mm | +/-0,25 | 0,8 | D1 + 1 mm | +/-0,38 | +/-0,38 | ||
| H | 57,00 | 1 | D1 + 2 mm | +/-0,28 | 0,8 | D1 + 1 mm | +/-0,42 | +/-0,42 | ||
| Wendeschneidplatten-Größe | Durchmesserbereich (mm) | 2 x D und 3 x D | 4 x D | 5 x D | |||
| X-Versatzwert | D1 max. | X-Versatzwert | D1 max. | X-Versatz | D1 max. | ||
| A | 12,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| B | 14,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| C | 19,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| D | 24,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| E | 30,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| F | 37,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| G | 46,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| H | 57,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| Wendeschneidplatten-Größe | Durchmesser- bereich mm (in) | 2 x D/3 x D | 4 x D | 5 x D | |||||
| D1 max. Wert mm (in) | Bohrungs- toleranz mm (in) | X-Offset- wert max. in mm (max. in Zoll) | D1 max. Wert mm (in) | Bohrungs- toleranz mm (in) | X-Offset- wert max. in mm (max. in Zoll) | D1 max. Wert mm (in) | Bohrungs- toleranz mm (in) | ||
| A | 12,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| F | 37,00 | D1 + 1,6mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | D1 + 2mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | D1 + 2mm | +/- 0,28 | 0,8 | D1 + 1mm | +/- 0,42 | +/- 0,42 | ||
| Empfohlener Vorschub pro Umdrehung | |||||||||||
| Werkstoffgruppe | Geometrie | Sorte | Schnittgeschwindigkeit | Werkzeugdurchmesser | 0,473 | 0,563 | 0,750 | 0,969 | |||
| innen | außen | Min. | Startwert | Max. | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024 | 0.0031 | 0,0039 | 0.0043 |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024 | 0.0031 | 0.0039 | 0.0043 |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0.0024 | 0.0031 | 0.0039 | 0.0043 |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0.0031 | 0.0039 | 0.0043 | 0.0047 |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0.0031 | 0.0039 | 0.0043 | 0.0047 |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0.0024 | 0.0031 | 0.0039 | 0.0043 |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0.0024 | 0.0031 | 0.0039 | 0.0043 |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0.0024 | 0.0028 | 0.0031 | 0.0039 |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0.0024 | 0.0028 | 0.0031 | 0.0039 |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0.0024 | 0.0028 | 0.0031 | 0.0039 |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0.0031 | 0.0031 | 0.0039 | 0.0047 |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0.0031 | 0.0031 | 0.0039 | 0.0047 |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0.0031 | 0.0031 | 0.0039 | 0.0047 |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0.0024 | 0.0031 | 0.0039 | 0.0043 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0.0024 | 0.0031 | 0.0039 | 0.0043 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0.0024 | 0.0028 | 0.0031 | 0.0039 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0.0031 | 0.0031 | 0.0039 | 0.0047 |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0.0031 | 0.0031 | 0.0039 | 0.0047 |
| Werkstoffgruppe | Geometrie | Sorte | Schnittgeschwindigkeit | Werkzeugdurchmesser | 1,188 | 1,469 | 1,813 | 2,250 | |||
| innen | außen | Min. | Startwert | Max. | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0051 | 0.0059 | 0.0063 | 0.0067 |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0051 | 0.0059 | 0.0063 | 0.0067 |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0.0051 | 0.0059 | 0.0063 | 0.0067 |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0.0053 | 0.0063 | 0.0071 | 0.0075 |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0.0055 | 0.0063 | 0.0071 | 0.0075 |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0.0051 | 0.0059 | 0.0063 | 0.0067 |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0.0051 | 0.0059 | 0.0063 | 0.0067 |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0.0047 | 0.0055 | 0.0063 | 0.0063 |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0.0047 | 0.0055 | 0.0063 | 0.0063 |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0.0047 | 0.0055 | 0.0063 | 0.0063 |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0.0055 | 0.0063 | 0.0071 | 0.0079 |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0.0055 | 0.0063 | 0.0071 | 0.0079 |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0.0055 | 0.0063 | 0.0071 | 0.0079 |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0.0051 | 0.0059 | 0.0063 | 0.0067 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0.0051 | 0.0059 | 0.0063 | 0.0067 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0.0047 | 0.0055 | 0.0063 | 0.0063 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0.0055 | 0.0063 | 0.0071 | 0.0079 |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0.0055 | 0.0063 | 0.0071 | 0.0079 |
| Recommended Feed Rate per Revolution | |||||||||||
| Werkstoffgruppe | Geometrie | Sorte | Schnittgeschwindigkeit | Werkzeugdurchmesser | .473 | .563 | .750 | .969 | |||
| innen | außen | Min. | Startwert | Max. | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0031 | 0.0031–0.0043 | 0.0039–0.0051 | 0.0043–0.0055 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0041 | 0.0034–0.0044 | |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0039 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0.0024–0.0039 | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0067 |
| – DU | WU20PH | WU20PH | 290 | 450 | 675 | IPR | – | – | 0.0031–0.0050 | 0.0034–0.0054 | |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 480 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 450 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 600 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| -V36 | WU40PH | WU25CH | 290 | 385 | 500 | IPR | - | - | 0.0031-0.0047 | 0.0034-0.0050 | |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 290 | 385 | 575 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| – DU | WU20PH | WU20PH | 265 | 340 | 500 | IPR | – | – | 0.0025–0.0047 | 0.0031–0.0050 | |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 240 | 290 | 480 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 290 | 480 | 675 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| – DU | WU20PH | WU20PH | 240 | 430 | 625 | IPR | – | – | 0.0031–0.0057 | 0.0038–0.0075 | |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 240 | 400 | 575 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0.0024–0.0039 | 0.0028–0.0043 | 0.0031–0.0047 | 0.0039–0.0055 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| - DU | WU20PH | WU20PH | 50 | 70 | 100 | IPR | - | - | 0.0031-0.0047 | 0.0038-0.006 | |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| – DU | WU20PH | WU20PH | 85 | 95 | 150 | IPR | – | – | 0.0031–0.0047 | 0.0038–0.006 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO Katalog
ANSI Katalog
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Katalog | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?