Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (26)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(26)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(26)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(26)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(26)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(26)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(26)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(26)
- M Stainless Steel (26)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(26)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(26)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(26)
- K Cast Iron (26)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(26)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(26)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(26)
- N Non-Ferrous Materials (26)
- N1Wrought Aluminum (26)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(26)
- N3High-Silicon Aluminum Alloys Si >12.2%(24)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (26)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (26)
- N6Carbon, Graphite Composites, CFRP (26)
- N7MMC's (24)
- S High-Temp Alloys (26)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(26)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(26)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(26)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(26)
- H Hardened Materials (24)
- H1Hardened Materials 44-48 HRC(24)
- H2Hardened Materials 48-55 HRC(24)
- H3Hardened Materials 56-60 HRC(24)
- H4Hardened Materials >60 HRC(24)
- C CFRP Materials (26)
- C1CFRP, CFRP / CFRP (26)
- C2CFRP / Aluminium CFRP / Non-Ferrous (24)
Applications
Applications
Facing (6)
Multiple Direction Cutting (23)
Profiling (22)
Turning (19)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (26)
- Lightly Interrupted Cut (26)
- Smooth Cut (26)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 62.5 (3)
- 90.0 (2)
- 93.0 (12)
- 95.0 (5)
- 107.5 (4)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (23)
- 2.0 (24)
- 3.0 (2)
- 4.0 (6)
to
Over All Length [L]
Over All Length [L]
- 0.984 in(12)
- 1.181 in(14)
to
Over All Length [L]
Over All Length [L]
- 25.0 mm(12)
- 30.0 mm(14)
to
Corner Radius
Corner Radius
- 0.0 in(16)
- 0.001 in(16)
- 0.002 in(21)
- 0.004 in(22)
- 0.008 in(24)
- 0.016 in(26)
- 0.031 in(26)
- 0.047 in(24)
- 0.063 in(7)
to
Corner Radius
Corner Radius
- 0.0 mm(16)
- 0.025 mm(16)
- 0.05 mm(21)
- 0.1 mm(22)
- 0.2 mm(24)
- 0.4 mm(26)
- 0.8 mm(26)
- 1.201 mm(24)
- 1.6 mm(7)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- HCK10 (1)
- K313 (24)
- K68 (7)
- KB1345 (15)
- KB1610 (5)
- KB1630 (6)
- KB5610 (16)
- KB5630 (19)
- KBH10 (21)
- KBH20 (24)
- KC5010 (26)
- KC5020P (2)
- KC5025 (26)
- KC5410 (24)
- KC730 (24)
- KC850 (26)
- KCK05 (24)
- KCK05B (16)
- KCK15 (22)
- KCK15B (22)
- KCK20 (24)
- KCK20B (24)
- KCM15 (19)
- KCM15B (20)
- KCM25 (26)
- KCM25B (24)
- KCM25S (14)
- KCM35 (22)
- KCM35B (5)
- KCP05 (23)
- KCP05B (10)
- KCP10 (26)
- KCP10B (26)
- KCP15 (5)
- KCP20S (14)
- KCP25 (24)
- KCP25B (26)
- KCP25C (26)
- KCP30 (22)
- KCP30B (1)
- KCP40B (5)
- KCS10 (26)
- KCS10B (24)
- KCS25S (14)
- KCU10 (26)
- KCU10B (26)
- KCU25 (24)
- KCU25B (26)
- KD1400 (23)
- KD1405 (5)
- KD1425 (21)
- KN10S (16)
- KT315 (24)
- KT325 (23)
- KTP10 (23)
- KTP25S (25)
- PB250 (1)
- THM (24)
- THM-X (15)
- TN10P (23)
- TN10U (24)
- TN15M (19)
- TN15U (10)
- TN2000 (20)
- TN20K (22)
- TN20P (26)
- TN30M (21)
- TN4000 (10)
- TN6010 (14)
- TN6025 (14)
- TTR (2)
- WBH10P (19)
- WBH10U (5)
- WBH20P (17)
- WBH30P (19)
- WBK45U (1)
- WDN00U (5)
- WDN25U (23)
- WK05CT (7)
- WK15CT (22)
- WK20CT (24)
- WM15CT (21)
- WM25CT (26)
- WP15CT (26)
- WP20TT (9)
- WP25CT (26)
- WP35CT (10)
- WS10PT (19)
- WS25PT (18)
- WU05PT (17)
- WU10HT (22)
- WU10PT (24)
- WU25PT (22)
Hand Of Tool
Hand Of Tool
- L (9)
- N (3)
- R (14)
Wiper Insert
Wiper Insert
- N (26)
- Y (9)
F Dimension
F Dimension
- 0.0 mm(3)
- 12.5 mm(12)
- 16.0 mm(7)
- 17.0 mm(2)
- 22.0 mm(2)
to
F Dimension
F Dimension
- 0.0 in(3)
- 0.492 in(12)
- 0.63 in(7)
- 0.669 in(2)
- 0.866 in(2)
to
Cutting Direction
Cutting Direction
- B (5)
- E (4)
- S (17)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (6)
- D-DIAMOND/RHOMBIC 55 (11)
- T-TRIANGLE 60 (2)
- V-DIAMOND/RHOMBIC 35 (7)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (22)
- B L (24)
- D P (23)
- H T (24)
- H W (26)
Back-End
System Size
System Size
- KM20 (17)
- KM25 (9)
Back-End Diameter
Back-End Diameter
- 20.0 mm(17)
- 25.0 mm(9)
to
Back-End Diameter
Back-End Diameter
- 0.787 in(17)
- 0.984 in(9)
to
No filters matching ""
