WGC Modular Blades

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (44)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(44)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(44)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(44)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(44)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(44)
    • M Stainless Steel (44)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(44)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(44)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(44)
    • K Cast Iron (44)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(44)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(44)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(44)
    • N Non-Ferrous Materials (44)
      • N1
        Wrought Aluminum (44)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(44)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(44)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (44)
      • N6
        Carbon, Graphite Composites, CFRP (44)
    • S High-Temp Alloys (44)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(44)
    • H Hardened Materials (22)
      • H1
        Hardened Materials 44-48 HRC(22)
      • H2
        Hardened Materials 48-55 HRC(22)
    Select All Star
    • US (12)
    Applications
    Applications
    • Cut-OffCut-Off (46)
    • Face GroovingFace Grooving (12)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (44)
    • Lightly Interrupted Cut (44)
    • Smooth Cut (44)
    • Varying Depth of Cut (44)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (46)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Over All Length [L]
    Over All Length [L]
    • 1.8798 in(5)
    • 1.8799 in(5)
    • 1.9535 in(3)
    • 1.9536 in(1)
    • 2.0372 in(3)
    • 2.0374 in(1)
    • 2.2735 in(4)
    • 2.3 in(3)
    • 2.3002 in(1)
    • 2.3472 in(3)
    • 2.3473 in(1)
    • 2.4309 in(1)
    • 2.4311 in(1)
    • 2.55 in(8)
    • 2.5835 in(2)
    • 2.6672 in(3)
    • 2.6673 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 47.746 mm(5)
    • 47.75 mm(5)
    • 49.62 mm(4)
    • 51.746 mm(3)
    • 51.75 mm(1)
    • 57.746 mm(3)
    • 57.75 mm(1)
    • 58.42 mm(3)
    • 58.425 mm(1)
    • 59.62 mm(4)
    • 61.746 mm(1)
    • 61.75 mm(1)
    • 64.77 mm(8)
    • 65.62 mm(2)
    • 67.746 mm(3)
    • 67.75 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.003 in(8)
    • 0.004 in(12)
    • 0.006 in(4)
    • 0.008 in(22)
    • 0.012 in(18)
    • 0.013 in(20)
    • 0.016 in(40)
    • 0.031 in(32)
    • 0.039 in(4)
    • 0.047 in(4)
    • 0.059 in(8)
    • 0.063 in(8)
    • 0.079 in(10)
    • 0.094 in(10)
    • 0.098 in(8)
    • 0.118 in(10)
    • 0.125 in(10)
    • 0.156 in(4)
    • 0.157 in(4)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.075 mm(8)
    • 0.1 mm(12)
    • 0.15 mm(4)
    • 0.2 mm(22)
    • 0.3 mm(18)
    • 0.325 mm(20)
    • 0.4 mm(40)
    • 0.775 mm(10)
    • 0.8 mm(32)
    • 1.0 mm(4)
    • 1.2 mm(4)
    • 1.5 mm(8)
    • 1.6 mm(8)
    • 2.0 mm(10)
    • 2.375 mm(10)
    • 2.5 mm(8)
    • 3.0 mm(10)
    • 3.175 mm(10)
    • 3.95 mm(4)
    • 4.0 mm(4)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(44)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(44)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WS25PT (8)
    • WU10PT (22)
    • WU25PT (44)
    • WU35PT (12)
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 57.15 mm(12)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 2.25 in(12)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 16.0 in(12)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 406.4 mm(12)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Front-End
    Clamp Style
    Clamp Style
    • C (12)
    Cutting Width
    Cutting Width
    • 0.0787 in(4)
    • 0.0788 in(4)
    • 0.079 in(4)
    • 0.0837 in(4)
    • 0.094 in(4)
    • 0.0984 in(4)
    • 0.0988 in(4)
    • 0.099 in(4)
    • 0.118 in(8)
    • 0.1181 in(8)
    • 0.1182 in(8)
    • 0.123 in(8)
    • 0.125 in(8)
    • 0.13 in(8)
    • 0.157 in(10)
    • 0.1575 in(10)
    • 0.158 in(10)
    • 0.162 in(10)
    • 0.1624 in(10)
    • 0.187 in(10)
    • 0.1872 in(10)
    • 0.1875 in(10)
    • 0.192 in(10)
    • 0.1921 in(10)
    • 0.1968 in(8)
    • 0.1969 in(8)
    • 0.197 in(8)
    • 0.2018 in(8)
    • 0.236 in(10)
    • 0.2362 in(10)
    • 0.241 in(10)
    • 0.2411 in(10)
    • 0.25 in(10)
    • 0.255 in(10)
    • 0.281 in(10)
    • 0.312 in(4)
    • 0.315 in(4)
    • 0.317 in(4)
    • 0.3199 in(4)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 2.0 mm(4)
    • 2.125 mm(4)
    • 2.387 mm(4)
    • 2.388 mm(4)
    • 2.5 mm(4)
    • 2.51 mm(4)
    • 2.511 mm(4)
    • 3.0 mm(8)
    • 3.125 mm(8)
    • 3.175 mm(8)
    • 3.176 mm(8)
    • 3.301 mm(8)
    • 3.302 mm(8)
    • 4.0 mm(10)
    • 4.125 mm(10)
    • 4.75 mm(10)
    • 4.754 mm(10)
    • 4.761 mm(10)
    • 4.762 mm(10)
    • 4.763 mm(10)
    • 4.877 mm(10)
    • 4.878 mm(10)
    • 5.0 mm(8)
    • 5.125 mm(8)
    • 6.0 mm(10)
    • 6.125 mm(10)
    • 6.35 mm(10)
    • 6.477 mm(10)
    • 6.478 mm(10)
    • 7.125 mm(10)
    • 7.92 mm(4)
    • 7.925 mm(4)
    • 8.0 mm(4)
    • 8.051 mm(4)
    • 8.052 mm(4)
    • 8.125 mm(4)
    Cutting Width MintoCutting Width Max
    Insert Shape
    Insert Shape
    • PRISMATIC (46)
    Cartridge Size
    Cartridge Size
    • 50 (24)
    • 65 (10)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.4724 in(10)
    • 0.6299 in(8)
    • 0.75 in(4)
    • 0.8661 in(4)
    • 1.0 in(8)
    • 1.0236 in(6)
    • 1.2598 in(6)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 12.0 mm(10)
    • 16.0 mm(8)
    • 19.05 mm(4)
    • 22.0 mm(4)
    • 25.4 mm(8)
    • 26.0 mm(6)
    • 32.0 mm(6)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • H W (44)
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)