P-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (35)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(35)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(35)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(35)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(35)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(35)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(35)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(35)
- M Stainless Steel (35)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(35)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(35)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(35)
- K Cast Iron (35)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(35)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(35)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(35)
- N Non-Ferrous Materials (35)
- N1Wrought Aluminum (35)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(35)
- N3High-Silicon Aluminum Alloys Si >12.2%(20)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (35)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (35)
- N6Carbon, Graphite Composites, CFRP (35)
- N7MMC's (26)
- S High-Temp Alloys (35)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(35)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(35)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(35)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(35)
- H Hardened Materials (35)
- H1Hardened Materials 44-48 HRC(35)
- H2Hardened Materials 48-55 HRC(35)
- H3Hardened Materials 56-60 HRC(27)
- H4Hardened Materials >60 HRC(26)
- C CFRP Materials (35)
- C1CFRP, CFRP / CFRP (35)
- C2CFRP / Aluminium CFRP / Non-Ferrous (26)
Applications
Applications
Facing (31)
Multiple Direction Cutting (25)
Profiling (5)
TRN Boring (25)
Turning (35)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (35)
- Lightly Interrupted Cut (35)
- Smooth Cut (35)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (3)
- 63.0 (2)
- 75.0 (6)
- 90.0 (2)
- 93.0 (12)
- 95.0 (8)
- 107.5 (2)
to
Connection Style
Connection Style
- KM (8)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (20)
- 2.0 (20)
- 3.0 (6)
- 4.0 (26)
- 6.0 (8)
- 8.0 (13)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 1.575 in(33)
- 1.772 in(2)
to
Over All Length [L]
Over All Length [L]
- 40.0 mm(33)
- 45.0 mm(2)
to
Corner Radius
Corner Radius
- 0.004 in(16)
- 0.008 in(18)
- 0.014 in(8)
- 0.016 in(35)
- 0.024 in(2)
- 0.031 in(35)
- 0.047 in(35)
- 0.063 in(26)
to
Corner Radius
Corner Radius
- 0.1 mm(16)
- 0.2 mm(18)
- 0.351 mm(8)
- 0.4 mm(35)
- 0.601 mm(2)
- 0.8 mm(35)
- 1.201 mm(35)
- 1.6 mm(26)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (24)
- CW5025 (20)
- K060 (6)
- K090 (6)
- K313 (26)
- K68 (24)
- KB1340 (18)
- KB1345 (10)
- KB1610 (18)
- KB1630 (10)
- KB5610 (6)
- KB5630 (6)
- KBH10 (26)
- KBH10B (18)
- KBH20 (26)
- KBH20B (18)
- KBK35 (4)
- KC5010 (35)
- KC5025 (34)
- KC5410 (20)
- KC730 (18)
- KC850 (27)
- KC9125 (2)
- KCK05 (35)
- KCK05B (18)
- KCK15 (34)
- KCK15B (35)
- KCK20 (32)
- KCK20B (34)
- KCM15 (34)
- KCM15B (34)
- KCM25 (34)
- KCM25B (34)
- KCM35 (26)
- KCM35B (28)
- KCP05 (32)
- KCP05B (34)
- KCP10 (35)
- KCP10B (35)
- KCP25 (34)
- KCP25B (35)
- KCP25C (35)
- KCP30 (35)
- KCP30B (20)
- KCP40 (26)
- KCP40B (26)
- KCPK05 (32)
- KCS10 (6)
- KCS10B (32)
- KCU10 (35)
- KCU10B (35)
- KCU25 (34)
- KCU25B (34)
- KD1400 (10)
- KD1405 (6)
- KD1425 (12)
- KS15 (6)
- KT315 (35)
- KT325 (6)
- KTP10 (35)
- KTP25S (20)
- KY1540 (6)
- KY1615 (1)
- KY3500 (26)
- KY4300 (6)
- KY4400 (26)
- KYHK15B (26)
- KYK10 (16)
- KYK25 (14)
- KYS25 (12)
- KYS30 (14)
- PB100 (6)
- THM (16)
- THM-X (20)
- THMF-X (16)
- TN10P (26)
- TN10U (20)
- TN15M (20)
- TN15U (16)
- TN2000 (28)
- TN20K (26)
- TN20P (34)
- TN30M (22)
- TN30P (26)
- TN4000 (28)
- TN6010 (14)
- TTS (12)
- WBH10P (6)
- WBH10U (6)
- WBH20P (26)
- WBH30P (6)
- WBK40U (6)
- WDN00U (6)
- WDN25U (12)
- WK05CT (34)
- WK15CT (28)
- WK20CT (35)
- WM15CT (34)
- WM25CT (34)
- WM35CT (34)
- WP05CT (8)
- WP15CT (35)
- WP25CT (35)
- WP35CT (26)
- WS10PT (34)
- WS25PT (34)
- WU10HT (34)
- WU10PT (34)
- WU25PT (34)
- X00580 (6)
- X00581 (6)
- X00582 (6)
- X00583 (6)
- X00584 (6)
- X00585 (6)
- X00586 (6)
- X00591 (6)
- X00592 (6)
- X00593 (6)
- X00594 (6)
- X00596 (6)
- X00597 (6)
- X00599 (6)
Hand Of Tool
Hand Of Tool
- L (3)
- N (1)
- R (4)
Wiper Insert
Wiper Insert
- N (35)
- Y (24)
F Dimension
F Dimension
- 0.0 mm(3)
- 24.0 mm(2)
- 27.0 mm(3)
to
F Dimension
F Dimension
- 0.0 in(3)
- 0.946 in(2)
- 1.063 in(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 50.0 mm(18)
- 60.0 mm(2)
- 74.0 mm(2)
- 80.0 mm(1)
- 94.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.969 in(18)
- 2.362 in(2)
- 2.914 in(2)
- 3.15 in(1)
- 3.701 in(2)
to
Cutting Direction
Cutting Direction
- E (1)
- S (7)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (7)
- NEGATIVE-ZERO (1)
Maximum Bore Depth
Maximum Bore Depth
- 1.575 in(25)
to
Maximum Bore Depth
Maximum Bore Depth
- 40.0 mm(25)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (6)
- D-DIAMOND/RHOMBIC 55 (14)
- S-SQUARE 90 (7)
- T-TRIANGLE 60 (4)
- W-TRIGON 80 (4)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (24)
- B L (26)
- C A (27)
- C N (26)
- D P (20)
- H T (35)
- H W (35)
Back-End
Connection Type
Connection Type
- TAPER SHANK (8)
System Size
System Size
- KM40TS (8)
No filters matching ""