When it comes to added value and precision machining WIDIA 0°/90° shoulder mills permit excellent shoulder finishes, enhanced chip evacuation, and optimal insert support. Whether you’re using them for profiling, ramping, slotting, plunging, or helical and circular interpolation operations, these shoulder mills will provide the accuracy you need. WIDIA 0°/90° shoulder mills can handle a variety of materials including aluminum, steel, stainless steel, and exotic alloys. Reduce your machining times and increase productivity with WIDIA high-performance shoulder milling systems.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (707)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(640)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(707)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(707)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(707)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(707)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(704)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(704)
- M Stainless Steel (712)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(712)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(712)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(712)
- K Cast Iron (692)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(692)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(677)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(677)
- N Non-Ferrous Materials (516)
- N1Wrought Aluminum (516)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(516)
- N3High-Silicon Aluminum Alloys Si >12.2%(505)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (25)
- N6Carbon, Graphite Composites, CFRP (25)
- N7MMC's (25)
- S High-Temp Alloys (709)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(654)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(654)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(654)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(709)
- H Hardened Materials (477)
- H1Hardened Materials 44-48 HRC(477)
Select All Star
- CN (239)
- DE (431)
- GB (86)
- IN (122)
- SG (168)
- US (182)
Applications
Applications
Face Milling (329)
Pocket (183)
Pocket Helical (144)
Pocket Milling (205)
Pocket Plunge Milling (61)
Profile Milling (70)
Ramping (161)
Shoulder Bottom Shoulder (113)
Shoulder Milling (329)
Slot Milling (195)
Slot Side (19)
Slot Square End (194)
Cutting Diameter
Cutting Diameter
- 0.473 in(3)
- 0.5 in(2)
- 0.625 in(6)
- 0.63 in(12)
- 0.669 in(1)
- 0.709 in(4)
- 0.75 in(13)
- 0.787 in(18)
- 0.866 in(4)
- 0.984 in(28)
- 1.0 in(30)
- 1.102 in(1)
- 1.181 in(1)
- 1.248 in(6)
- 1.25 in(19)
- 1.26 in(36)
- 1.379 in(2)
- 1.5 in(24)
- 1.575 in(22)
- 1.969 in(20)
- 2.0 in(18)
- 2.48 in(17)
- 2.5 in(13)
- 3.0 in(14)
- 3.008 in(1)
- 3.15 in(21)
- 3.938 in(16)
- 4.0 in(11)
- 4.921 in(16)
- 5.0 in(8)
- 6.0 in(6)
- 6.299 in(9)
- 7.875 in(3)
- 8.0 in(3)
- 9.843 in(1)
- 10.0 in(1)
to
Cutting Diameter
Cutting Diameter
- 12.0 mm(3)
- 12.701 mm(2)
- 15.875 mm(6)
- 16.0 mm(12)
- 17.0 mm(1)
- 18.0 mm(4)
- 19.05 mm(13)
- 20.0 mm(18)
- 22.0 mm(4)
- 25.0 mm(28)
- 25.401 mm(30)
- 28.0 mm(1)
- 30.0 mm(1)
- 31.701 mm(6)
- 31.75 mm(19)
- 32.0 mm(36)
- 35.0 mm(2)
- 38.1 mm(24)
- 40.0 mm(22)
- 50.0 mm(20)
- 50.801 mm(18)
- 63.0 mm(17)
- 63.5 mm(13)
- 76.2 mm(14)
- 76.4 mm(1)
- 80.0 mm(21)
- 100.0 mm(16)
- 101.601 mm(11)
- 125.0 mm(16)
- 127.0 mm(8)
- 152.4 mm(6)
- 160.0 mm(9)
- 200.0 mm(3)
- 203.201 mm(3)
- 250.0 mm(1)
- 254.0 mm(1)
to
Cutting Length
Cutting Length
- 6.0 mm(9)
- 9.0 mm(10)
- 9.5 mm(4)
- 9.8 mm(44)
- 10.0 mm(102)
- 10.15 mm(4)
- 11.326 mm(13)
- 11.375 mm(3)
- 11.4 mm(3)
- 11.451 mm(15)
- 11.525 mm(28)
- 11.55 mm(15)
- 11.576 mm(3)
- 11.701 mm(3)
- 12.0 mm(5)
- 12.701 mm(2)
- 13.976 mm(3)
- 14.0 mm(12)
- 15.0 mm(53)
- 15.3 mm(1)
- 15.351 mm(1)
- 15.5 mm(2)
- 15.601 mm(1)
- 15.701 mm(8)
- 15.8 mm(3)
- 15.9 mm(4)
- 16.0 mm(4)
- 16.1 mm(6)
- 16.2 mm(17)
- 16.3 mm(16)
- 16.401 mm(4)
- 20.0 mm(9)
- 51.625 mm(1)
- 60.401 mm(1)
- 104.601 mm(1)
to
Cutting Length
Cutting Length
- 0.237 in(9)
- 0.354 in(10)
- 0.374 in(4)
- 0.386 in(44)
- 0.394 in(102)
- 0.4 in(4)
- 0.446 in(13)
- 0.448 in(3)
- 0.449 in(3)
- 0.451 in(15)
- 0.454 in(28)
- 0.455 in(15)
- 0.456 in(3)
- 0.461 in(3)
- 0.473 in(5)
- 0.5 in(2)
- 0.55 in(3)
- 0.551 in(12)
- 0.591 in(53)
- 0.602 in(1)
- 0.604 in(1)
- 0.61 in(2)
- 0.614 in(1)
- 0.618 in(8)
- 0.622 in(3)
- 0.626 in(4)
- 0.63 in(4)
- 0.634 in(6)
- 0.638 in(17)
- 0.642 in(16)
- 0.646 in(4)
- 0.787 in(9)
- 2.032 in(1)
- 2.378 in(1)
- 4.118 in(1)
to
Reach
Reach
- 0.709 in(1)
- 0.717 in(1)
- 0.791 in(1)
- 0.795 in(1)
- 0.8 in(1)
- 0.803 in(1)
- 0.828 in(4)
- 0.845 in(2)
- 0.85 in(1)
- 0.9 in(1)
- 0.984 in(17)
- 0.992 in(1)
- 1.0 in(2)
- 1.063 in(1)
- 1.071 in(1)
- 1.1 in(3)
- 1.102 in(8)
- 1.17 in(2)
- 1.181 in(7)
- 1.186 in(1)
- 1.22 in(18)
- 1.248 in(1)
- 1.25 in(7)
- 1.26 in(10)
- 1.282 in(1)
- 1.286 in(1)
- 1.299 in(3)
- 1.379 in(1)
- 1.437 in(1)
- 1.47 in(3)
- 1.5 in(8)
- 1.536 in(7)
- 1.566 in(1)
- 1.567 in(1)
- 1.575 in(84)
- 1.577 in(9)
- 1.594 in(1)
- 1.6 in(6)
- 1.61 in(2)
- 1.614 in(5)
- 1.693 in(5)
- 1.72 in(8)
- 1.732 in(2)
- 1.748 in(2)
- 1.75 in(15)
- 1.752 in(2)
- 1.772 in(1)
- 1.81 in(2)
- 1.901 in(2)
- 1.929 in(2)
- 1.969 in(55)
- 1.988 in(1)
- 2.0 in(22)
- 2.025 in(1)
- 2.1 in(2)
- 2.221 in(1)
- 2.244 in(1)
- 2.25 in(6)
- 2.362 in(1)
- 2.38 in(16)
- 2.382 in(1)
- 2.45 in(1)
- 2.48 in(29)
- 2.511 in(1)
- 2.559 in(1)
- 3.0 in(1)
- 3.5 in(1)
- 5.5 in(1)
to
Reach
Reach
- 18.0 mm(1)
- 18.2 mm(1)
- 20.1 mm(1)
- 20.201 mm(1)
- 20.326 mm(1)
- 20.401 mm(1)
- 21.0 mm(4)
- 21.451 mm(2)
- 21.6 mm(1)
- 22.85 mm(1)
- 25.0 mm(17)
- 25.201 mm(1)
- 25.401 mm(2)
- 27.0 mm(1)
- 27.201 mm(1)
- 27.951 mm(3)
- 28.0 mm(8)
- 29.725 mm(2)
- 30.0 mm(7)
- 30.125 mm(1)
- 31.0 mm(18)
- 31.701 mm(1)
- 31.75 mm(7)
- 32.0 mm(10)
- 32.551 mm(1)
- 32.676 mm(1)
- 33.0 mm(3)
- 35.0 mm(1)
- 36.5 mm(1)
- 37.35 mm(3)
- 38.1 mm(8)
- 39.0 mm(7)
- 39.776 mm(1)
- 39.801 mm(1)
- 40.0 mm(84)
- 40.051 mm(9)
- 40.5 mm(1)
- 40.651 mm(6)
- 40.901 mm(2)
- 41.0 mm(5)
- 43.0 mm(5)
- 43.7 mm(8)
- 44.0 mm(2)
- 44.401 mm(2)
- 44.45 mm(15)
- 44.5 mm(2)
- 45.0 mm(1)
- 45.975 mm(2)
- 48.25 mm(2)
- 49.0 mm(2)
- 50.0 mm(55)
- 50.5 mm(1)
- 50.801 mm(22)
- 51.426 mm(1)
- 53.35 mm(2)
- 56.401 mm(1)
- 57.0 mm(1)
- 57.151 mm(6)
- 60.0 mm(1)
- 60.45 mm(16)
- 60.5 mm(1)
- 62.225 mm(1)
- 63.0 mm(29)
- 63.75 mm(1)
- 65.0 mm(1)
- 76.2 mm(1)
- 88.9 mm(1)
- 139.701 mm(1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (402)
- 90.25 (2)
- 90.28 (2)
- 90.4 (4)
to
Connection Style
Connection Style
- A-Socket Head Cap Screw (162)
- B-Cutter Retention Screw (17)
- C-Bolt Circle (12)
- KL Screw (1)
- SHCS or RetScrw Or BoltCircle (4)
- Screw-On Connection (33)
- Straight-Cylindrical (107)
- Weldon (74)
Number of Flutes
Number of Flutes
- 1 (3)
- 10 (13)
- 11 (5)
- 12 (14)
- 14 (6)
- 16 (4)
- 2 (61)
- 22 (2)
- 3 (75)
- 4 (72)
- 5 (52)
- 6 (36)
- 7 (20)
- 8 (26)
- 9 (21)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (147)
- 2.0 (499)
- 4.0 (301)
- 8.0 (58)
to
Over All Length [L]
Over All Length [L]
- 1.5 in(2)
- 1.575 in(67)
- 1.577 in(9)
- 1.681 in(2)
- 1.75 in(12)
- 1.752 in(2)
- 1.772 in(1)
- 1.889 in(1)
- 1.891 in(2)
- 1.969 in(40)
- 2.0 in(15)
- 2.047 in(2)
- 2.114 in(1)
- 2.116 in(1)
- 2.126 in(3)
- 2.244 in(1)
- 2.38 in(16)
- 2.465 in(6)
- 2.48 in(33)
- 2.539 in(10)
- 2.638 in(1)
- 2.75 in(2)
- 2.757 in(3)
- 2.914 in(1)
- 2.953 in(1)
- 3.0 in(1)
- 3.11 in(4)
- 3.15 in(1)
- 3.189 in(3)
- 3.2 in(2)
- 3.228 in(2)
- 3.25 in(5)
- 3.27 in(1)
- 3.465 in(3)
- 3.5 in(4)
- 3.504 in(6)
- 3.543 in(3)
- 3.6 in(2)
- 3.75 in(4)
- 3.781 in(4)
- 3.938 in(13)
- 4.0 in(13)
- 4.03 in(1)
- 4.3 in(3)
- 4.331 in(12)
- 4.351 in(1)
- 4.37 in(2)
- 4.5 in(8)
- 4.53 in(5)
- 4.724 in(4)
- 4.799 in(1)
- 4.8 in(3)
- 5.118 in(5)
- 5.2 in(1)
- 5.202 in(2)
- 5.5 in(1)
- 5.906 in(5)
- 6.0 in(4)
- 6.299 in(2)
- 6.694 in(10)
- 6.7 in(4)
- 6.702 in(1)
- 7.087 in(1)
- 7.875 in(5)
- 8.0 in(11)
- 8.268 in(4)
- 8.661 in(1)
- 9.799 in(2)
- 9.8 in(2)
- 9.843 in(4)
to
Over All Length [L]
Over All Length [L]
- 38.1 mm(2)
- 40.0 mm(67)
- 40.051 mm(9)
- 42.7 mm(2)
- 44.45 mm(12)
- 44.5 mm(2)
- 45.0 mm(1)
- 47.95 mm(1)
- 48.0 mm(2)
- 50.0 mm(40)
- 50.801 mm(15)
- 52.0 mm(2)
- 53.7 mm(1)
- 53.75 mm(1)
- 54.0 mm(3)
- 57.0 mm(1)
- 60.45 mm(16)
- 62.6 mm(6)
- 63.0 mm(33)
- 64.5 mm(10)
- 67.0 mm(1)
- 69.851 mm(2)
- 70.0 mm(3)
- 74.0 mm(1)
- 75.0 mm(1)
- 76.2 mm(1)
- 79.0 mm(4)
- 80.0 mm(1)
- 81.0 mm(3)
- 81.275 mm(2)
- 82.0 mm(2)
- 82.551 mm(5)
- 83.051 mm(1)
- 88.0 mm(3)
- 88.9 mm(4)
- 89.0 mm(6)
- 90.0 mm(3)
- 91.45 mm(2)
- 95.25 mm(4)
- 96.0 mm(4)
- 100.0 mm(13)
- 101.601 mm(13)
- 102.351 mm(1)
- 109.226 mm(3)
- 110.0 mm(12)
- 110.5 mm(1)
- 111.0 mm(2)
- 114.301 mm(8)
- 115.051 mm(5)
- 120.0 mm(4)
- 121.9 mm(1)
- 121.926 mm(3)
- 130.0 mm(5)
- 132.076 mm(1)
- 132.1 mm(2)
- 139.701 mm(1)
- 150.0 mm(5)
- 152.4 mm(4)
- 160.0 mm(2)
- 170.0 mm(10)
- 170.175 mm(4)
- 170.201 mm(1)
- 180.0 mm(1)
- 200.0 mm(5)
- 203.201 mm(11)
- 210.0 mm(4)
- 220.0 mm(1)
- 248.9 mm(2)
- 248.925 mm(2)
- 250.0 mm(4)
to
Corner Radius
Corner Radius
- 0.008 in(101)
- 0.016 in(380)
- 0.031 in(552)
- 0.047 in(460)
- 0.063 in(434)
- 0.065 in(7)
- 0.066 in(17)
- 0.067 in(2)
- 0.079 in(247)
- 0.081 in(6)
- 0.083 in(7)
- 0.095 in(172)
- 0.098 in(21)
- 0.122 in(90)
- 0.125 in(20)
- 0.126 in(176)
- 0.157 in(86)
- 0.237 in(62)
to
Corner Radius
Corner Radius
- 0.2 mm(101)
- 0.4 mm(380)
- 0.775 mm(92)
- 0.8 mm(544)
- 1.201 mm(460)
- 1.6 mm(434)
- 1.651 mm(7)
- 1.675 mm(17)
- 1.701 mm(2)
- 2.0 mm(247)
- 2.051 mm(6)
- 2.1 mm(7)
- 2.401 mm(172)
- 2.5 mm(21)
- 3.1 mm(90)
- 3.176 mm(20)
- 3.2 mm(176)
- 4.0 mm(86)
- 6.0 mm(62)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- THM (64)
- THM-U (36)
- THR (28)
- THR-S (11)
- TN2510 (49)
- TN25M (42)
- TN450 (53)
- TN5515 (53)
- TN6405 (25)
- TN6425 (24)
- TN6430 (31)
- TN6501 (22)
- TN6502 (22)
- TN6510 (39)
- TN6520 (43)
- TN6525 (44)
- TN6540 (66)
- TN7525 (53)
- TN7535 (53)
- TTI25 (56)
- TTM (26)
- TTM08 (52)
- TTR (17)
- WDN10U (86)
- WK15CM (445)
- WK15PM (315)
- WK20PM (45)
- WN10HM (154)
- WN25PM (355)
- WP25PM (382)
- WP35CM (450)
- WP40PM (399)
- WS30PM (122)
- WS40PM (400)
- WU10PM (138)
- WU20PM (194)
- WU35PM (229)
Hand Of Tool
Hand Of Tool
- R (410)
Rough Finish
Rough Finish
- FR (5)
- R (1)
Wiper Insert
Wiper Insert
- N (438)
- Y (14)
Maximum Ramp Angle
Maximum Ramp Angle
- 0.7 (3)
- 0.9 (4)
- 1.1 (1)
- 1.2 (3)
- 1.3 (3)
- 1.5 (5)
- 1.6 (2)
- 1.7 (2)
- 1.8 (1)
- 1.9 (5)
- 2.0 (4)
- 2.1 (4)
- 2.5 (1)
- 2.6 (3)
- 2.8 (2)
- 3.0 (8)
- 3.2 (1)
- 3.6 (13)
- 3.7 (2)
- 4.0 (8)
- 4.2 (1)
- 4.3 (9)
- 5.0 (1)
- 5.1 (9)
- 5.3 (8)
- 5.7 (6)
- 5.8 (6)
- 6.6 (1)
- 7.8 (8)
- 8.0 (2)
- 8.5 (4)
- 8.6 (7)
- 8.8 (4)
- 9.7 (1)
- 10.0 (5)
- 12.5 (2)
to
Front-End
Insert Shape
Insert Shape
- A-PARALLELOGRAM 85 (13)
- S-SQUARE 90 (123)
- X-PARALLELOGRAM 75 (313)
- X-PARALLELOGRAM 80 (172)
- X-RECTANGLE MILL 4 90 (254)
- X-RH0MBIC 70 (14)
Neck Diameter
Neck Diameter
- 0.371 in(2)
- 0.392 in(1)
- 0.467 in(1)
- 0.539 in(2)
- 0.543 in(5)
- 0.577 in(1)
- 0.61 in(1)
- 0.636 in(1)
- 0.669 in(1)
- 0.67 in(5)
- 0.709 in(7)
- 0.722 in(1)
- 0.728 in(5)
- 0.74 in(1)
- 0.768 in(3)
- 0.785 in(1)
- 0.828 in(3)
- 0.843 in(3)
- 0.896 in(7)
- 0.911 in(6)
- 0.929 in(1)
- 0.965 in(8)
- 0.98 in(3)
- 0.984 in(2)
- 1.084 in(1)
- 1.093 in(4)
- 1.102 in(5)
- 1.151 in(4)
- 1.159 in(8)
- 1.161 in(1)
- 1.22 in(3)
- 1.228 in(2)
- 1.24 in(1)
- 1.303 in(1)
- 1.343 in(6)
- 1.417 in(5)
to
Neck Diameter
Neck Diameter
- 9.425 mm(2)
- 9.951 mm(1)
- 11.851 mm(1)
- 13.701 mm(2)
- 13.8 mm(5)
- 14.65 mm(1)
- 15.5 mm(1)
- 16.151 mm(1)
- 17.0 mm(1)
- 17.026 mm(5)
- 18.0 mm(7)
- 18.35 mm(1)
- 18.5 mm(5)
- 18.8 mm(1)
- 19.5 mm(3)
- 19.951 mm(1)
- 21.0 mm(3)
- 21.401 mm(3)
- 22.75 mm(7)
- 23.151 mm(6)
- 23.6 mm(1)
- 24.5 mm(8)
- 24.901 mm(3)
- 25.0 mm(2)
- 27.526 mm(1)
- 27.75 mm(4)
- 28.0 mm(5)
- 29.201 mm(4)
- 29.451 mm(8)
- 29.5 mm(1)
- 31.0 mm(3)
- 31.201 mm(2)
- 31.5 mm(1)
- 33.1 mm(1)
- 34.1 mm(6)
- 36.0 mm(5)
to
Insert Geometry
Shape
Shape
- A-PARALLELOGRAM 85 (9)
- S-SQUARE 90 (57)
- X-PARALLELOGRAM 75 (170)
- X-PARALLELOGRAM 80 (121)
- X-RECTANGLE MILL 4 90 (91)
- X-RH0MBIC 70 (4)
Insert IC Size
Insert IC Size
- 9.525 mm(5)
- 12.0 mm(14)
- 12.701 mm(33)
- 15.875 mm(10)
to
Insert IC Size
Insert IC Size
- 0.375 in(5)
- 0.473 in(14)
- 0.5 in(33)
- 0.625 in(10)
to
Cutting Edge Length
Cutting Edge Length
- 7.0 mm(16)
- 8.875 mm(1)
- 8.951 mm(1)
- 9.0 mm(1)
- 9.175 mm(1)
- 9.451 mm(1)
- 9.475 mm(5)
- 9.875 mm(2)
- 10.375 mm(4)
- 10.451 mm(5)
- 10.8 mm(16)
- 10.826 mm(16)
- 11.0 mm(15)
- 11.451 mm(3)
- 11.476 mm(6)
- 11.675 mm(3)
- 11.726 mm(40)
- 11.75 mm(39)
- 12.0 mm(14)
- 12.701 mm(32)
- 12.8 mm(1)
- 15.3 mm(58)
- 15.65 mm(3)
- 15.675 mm(58)
- 15.775 mm(3)
- 15.875 mm(15)
- 16.3 mm(6)
- 16.55 mm(7)
- 16.7 mm(51)
- 16.725 mm(10)
- 17.0 mm(9)
to
Cutting Edge Length
Cutting Edge Length
- 0.276 in(16)
- 0.35 in(1)
- 0.352 in(1)
- 0.354 in(1)
- 0.361 in(1)
- 0.372 in(1)
- 0.373 in(5)
- 0.389 in(2)
- 0.409 in(4)
- 0.412 in(5)
- 0.425 in(16)
- 0.426 in(16)
- 0.433 in(15)
- 0.451 in(3)
- 0.452 in(6)
- 0.46 in(3)
- 0.462 in(40)
- 0.463 in(39)
- 0.473 in(14)
- 0.5 in(32)
- 0.504 in(1)
- 0.602 in(58)
- 0.616 in(3)
- 0.617 in(58)
- 0.621 in(3)
- 0.625 in(15)
- 0.642 in(6)
- 0.652 in(7)
- 0.657 in(51)
- 0.658 in(10)
- 0.669 in(9)
to
Chip Breaker CBMD
Chip Breaker CBMD
- AL (14)
- ALP (38)
- GE (11)
- MH (61)
- ML (95)
- MM (158)
- MR (3)
- MS (13)
- MU (6)
Cutting Tool Material
Cutting Tool Material
- D P (2)
- H T (3)
- H W (447)
Tolerance Class
Tolerance Class
- C (71)
- E (4)
- G (51)
- H (93)
- M (79)
- N (14)
- P (140)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (181)
- SCREW-ON (33)
- SHELL MILL (196)
Back-End Diameter
Back-End Diameter
- 12.0 mm(3)
- 12.701 mm(2)
- 13.0 mm(2)
- 15.875 mm(7)
- 16.0 mm(25)
- 18.0 mm(3)
- 19.0 mm(7)
- 19.05 mm(39)
- 19.1 mm(6)
- 20.0 mm(21)
- 21.0 mm(6)
- 22.0 mm(40)
- 24.375 mm(1)
- 25.0 mm(32)
- 25.401 mm(53)
- 27.0 mm(17)
- 28.0 mm(3)
- 29.0 mm(16)
- 31.701 mm(7)
- 31.75 mm(17)
- 32.0 mm(39)
- 38.1 mm(27)
- 40.0 mm(23)
- 50.801 mm(6)
- 60.0 mm(4)
- 63.5 mm(4)
to
Back-End Diameter
Back-End Diameter
- 0.473 in(3)
- 0.5 in(2)
- 0.512 in(2)
- 0.625 in(7)
- 0.63 in(25)
- 0.709 in(3)
- 0.748 in(7)
- 0.75 in(39)
- 0.752 in(6)
- 0.787 in(21)
- 0.828 in(6)
- 0.866 in(40)
- 0.96 in(1)
- 0.984 in(32)
- 1.0 in(53)
- 1.063 in(17)
- 1.102 in(3)
- 1.143 in(16)
- 1.248 in(7)
- 1.25 in(17)
- 1.26 in(39)
- 1.5 in(27)
- 1.575 in(23)
- 2.0 in(6)
- 2.362 in(4)
- 2.5 in(4)
to
No filters matching ""
