VSM17 Series
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (12)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(12)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(12)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(12)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(12)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
- M Stainless Steel (12)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(12)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(12)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(12)
- K Cast Iron (12)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(12)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(12)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
- N Non-Ferrous Materials (12)
- N1Wrought Aluminum (12)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(12)
- N3High-Silicon Aluminum Alloys Si >12.2%(12)
- S High-Temp Alloys (12)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(12)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(12)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(12)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(12)
- H Hardened Materials (12)
- H1Hardened Materials 44-48 HRC(12)
Applications
Applications
Face Milling (12)
Pocket (2)
Pocket Helical (2)
Pocket Milling (2)
Profile Milling (2)
Ramping (2)
Shoulder Bottom Shoulder (2)
Shoulder Milling (12)
Slot Milling (6)
Slot Side (2)
Slot Square End (6)
Cutting Diameter
Cutting Diameter
- 1.969 in(2)
- 2.0 in(4)
- 2.48 in(2)
- 2.5 in(2)
- 3.0 in(1)
- 3.15 in(1)
to
Cutting Diameter
Cutting Diameter
- 50.0 mm(2)
- 50.801 mm(4)
- 63.0 mm(2)
- 63.5 mm(2)
- 76.2 mm(1)
- 80.0 mm(1)
to
Cutting Length
Cutting Length
- 60.401 mm(5)
- 74.2 mm(1)
- 75.0 mm(5)
- 104.601 mm(1)
to
Cutting Length
Cutting Length
- 2.378 in(5)
- 2.922 in(1)
- 2.953 in(5)
- 4.118 in(1)
to
Reach
Reach
- 3.346 in(2)
- 3.5 in(3)
- 3.938 in(3)
- 4.0 in(3)
- 5.5 in(1)
to
Reach
Reach
- 85.0 mm(2)
- 88.9 mm(3)
- 100.0 mm(3)
- 101.601 mm(3)
- 139.701 mm(1)
to
Number of Flutes
Number of Flutes
- 4 (6)
- 5 (6)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (12)
- 2.0 (12)
to
Over All Length [L]
Over All Length [L]
- 3.346 in(2)
- 3.5 in(3)
- 3.938 in(3)
- 4.0 in(3)
- 5.5 in(1)
to
Over All Length [L]
Over All Length [L]
- 85.0 mm(2)
- 88.9 mm(3)
- 100.0 mm(3)
- 101.601 mm(3)
- 139.701 mm(1)
to
Corner Radius
Corner Radius
- 0.016 in(12)
- 0.031 in(12)
- 0.047 in(12)
- 0.063 in(12)
- 0.079 in(12)
- 0.095 in(12)
- 0.126 in(12)
- 0.157 in(12)
- 0.237 in(12)
to
Corner Radius
Corner Radius
- 0.4 mm(12)
- 0.8 mm(12)
- 1.201 mm(12)
- 1.6 mm(12)
- 2.0 mm(12)
- 2.401 mm(12)
- 3.2 mm(12)
- 4.0 mm(12)
- 6.0 mm(12)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- WK15CM (12)
- WK15PM (12)
- WN10HM (12)
- WN25PM (12)
- WP25PM (12)
- WP35CM (12)
- WP40PM (12)
- WS40PM (12)
- WU20PM (12)
- WU35PM (12)
Maximum Ramp Angle
Maximum Ramp Angle
- 1.6 (1)
- 1.7 (1)
- 2.1 (4)
- 2.8 (4)
- 3.0 (2)
to
Back-End
Back-End Diameter
Back-End Diameter
- 19.05 mm(2)
- 22.0 mm(2)
- 25.401 mm(4)
- 27.0 mm(2)
- 31.75 mm(1)
- 32.0 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.75 in(2)
- 0.866 in(2)
- 1.0 in(4)
- 1.063 in(2)
- 1.25 in(1)
- 1.26 in(1)
to
No filters matching ""
