Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (26)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(26)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(26)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(26)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(26)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(26)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(26)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(26)
- M Stainless Steel (26)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(26)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(26)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(26)
- K Cast Iron (26)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(26)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(26)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(26)
- N Non-Ferrous Materials (26)
- N1Wrought Aluminum (26)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(26)
- N3High-Silicon Aluminum Alloys Si >12.2%(18)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (26)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (26)
- N6Carbon, Graphite Composites, CFRP (26)
- N7MMC's (18)
- S High-Temp Alloys (26)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(26)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(26)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(26)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(26)
- H Hardened Materials (26)
- H1Hardened Materials 44-48 HRC(26)
- H2Hardened Materials 48-55 HRC(26)
- H3Hardened Materials 56-60 HRC(18)
- H4Hardened Materials >60 HRC(18)
- C CFRP Materials (26)
- C1CFRP, CFRP / CFRP (26)
- C2CFRP / Aluminium CFRP / Non-Ferrous (18)
Applications
Applications
Facing (12)
Multiple Direction Cutting (26)
Plunge Turning (2)
Profiling (27)
Turning (27)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (26)
- Lightly Interrupted Cut (26)
- Smooth Cut (26)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (2)
- 93.0 (14)
- 95.0 (12)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (18)
- 2.0 (16)
- 3.0 (6)
- 4.0 (18)
- 6.0 (8)
- 8.0 (2)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.046 in(1)
- 0.984 in(15)
- 1.181 in(12)
to
Over All Length [L]
Over All Length [L]
- 1.175 mm(1)
- 25.0 mm(15)
- 30.0 mm(12)
to
Corner Radius
Corner Radius
- 0.004 in(16)
- 0.008 in(20)
- 0.014 in(2)
- 0.016 in(26)
- 0.024 in(4)
- 0.031 in(26)
- 0.047 in(24)
- 0.063 in(14)
to
Corner Radius
Corner Radius
- 0.1 mm(16)
- 0.2 mm(20)
- 0.351 mm(2)
- 0.4 mm(26)
- 0.601 mm(4)
- 0.8 mm(26)
- 1.201 mm(24)
- 1.6 mm(14)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (14)
- CW5025 (10)
- K060 (2)
- K313 (18)
- K68 (14)
- KB1340 (6)
- KB1345 (8)
- KB1610 (16)
- KB1630 (12)
- KB5610 (10)
- KB5630 (10)
- KBH10 (18)
- KBH10B (14)
- KBH20 (18)
- KBH20B (14)
- KBK35 (2)
- KC5010 (26)
- KC5025 (24)
- KC5410 (18)
- KC730 (18)
- KC850 (18)
- KC9125 (4)
- KCK05 (26)
- KCK05B (8)
- KCK15 (24)
- KCK15B (24)
- KCK20 (22)
- KCK20B (24)
- KCM15 (24)
- KCM15B (26)
- KCM25 (26)
- KCM25B (24)
- KCM35 (18)
- KCM35B (12)
- KCP05 (22)
- KCP05B (24)
- KCP10 (26)
- KCP10B (26)
- KCP25 (26)
- KCP25B (26)
- KCP25C (26)
- KCP30 (26)
- KCP30B (14)
- KCP40 (14)
- KCP40B (20)
- KCPK05 (22)
- KCS10 (2)
- KCS10B (22)
- KCU10 (26)
- KCU10B (26)
- KCU25 (24)
- KCU25B (24)
- KD1400 (12)
- KD1405 (10)
- KD1425 (16)
- KS15 (2)
- KT315 (24)
- KT325 (2)
- KTP10 (24)
- KTP25S (18)
- KY1540 (2)
- KY1615 (4)
- KY3500 (18)
- KY4300 (6)
- KY4400 (18)
- KYHK15B (18)
- KYK10 (8)
- KYK25 (10)
- KYS25 (2)
- KYS30 (10)
- PB100 (2)
- THM (4)
- THM-X (4)
- THMF-X (4)
- TN10P (20)
- TN10U (18)
- TN15M (14)
- TN15U (12)
- TN2000 (12)
- TN20K (18)
- TN20P (26)
- TN30M (16)
- TN30P (10)
- TN4000 (12)
- TN6010 (4)
- TTS (2)
- WBH10P (10)
- WBH10U (2)
- WBH20P (18)
- WBH30P (10)
- WBK45U (4)
- WDN00U (6)
- WDN25U (16)
- WK05CT (24)
- WK15CT (12)
- WK20CT (24)
- WM15CT (24)
- WM25CT (24)
- WM35CT (20)
- WP05CT (6)
- WP15CT (24)
- WP25CT (24)
- WP35CT (18)
- WS10PT (24)
- WS25PT (24)
- WU10HT (24)
- WU10PT (20)
- WU25PT (20)
- X00580 (2)
- X00581 (2)
- X00582 (2)
- X00583 (2)
- X00584 (2)
- X00585 (2)
- X00586 (2)
- X00591 (2)
- X00592 (2)
- X00593 (2)
- X00594 (2)
- X00596 (2)
- X00597 (2)
- X00599 (2)
Hand Of Tool
Hand Of Tool
- L (14)
- R (14)
Wiper Insert
Wiper Insert
- N (26)
- Y (18)
F Dimension
F Dimension
- 12.5 mm(17)
- 16.0 mm(9)
- 22.0 mm(2)
to
F Dimension
F Dimension
- 0.492 in(17)
- 0.63 in(9)
- 0.866 in(2)
to
Cutting Direction
Cutting Direction
- B (12)
- S (15)
Front-End
Clamp Style
Clamp Style
- M (27)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (6)
- D-DIAMOND/RHOMBIC 55 (10)
- T-TRIANGLE 60 (2)
- V-DIAMOND/RHOMBIC 35 (4)
- W-TRIGON 80 (6)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (20)
- B L (18)
- C A (18)
- C N (18)
- D P (18)
- H T (24)
- H W (26)
Back-End
System Size
System Size
- KM20 (17)
- KM25 (11)
Back-End Diameter
Back-End Diameter
- 20.0 mm(17)
- 25.0 mm(10)
to
Back-End Diameter
Back-End Diameter
- 0.787 in(17)
- 0.984 in(10)
to
No filters matching ""
