KM32TS™ Internal Cutting Units

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (22)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(22)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(22)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(22)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(22)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(22)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(22)
    • M Stainless Steel (22)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(22)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(22)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(22)
    • K Cast Iron (22)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(22)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(22)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(22)
    • N Non-Ferrous Materials (22)
      • N1
        Wrought Aluminum (22)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(22)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(22)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (22)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (22)
      • N6
        Carbon, Graphite Composites, CFRP (22)
      • N7
        MMC's (22)
    • S High-Temp Alloys (22)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(22)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(22)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(22)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(22)
    • H Hardened Materials (19)
      • H1
        Hardened Materials 44-48 HRC(19)
      • H2
        Hardened Materials 48-55 HRC(19)
      • H3
        Hardened Materials 56-60 HRC(19)
      • H4
        Hardened Materials >60 HRC(19)
    • C CFRP Materials (18)
      • C1
        CFRP, CFRP / CFRP (18)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (18)
    Applications
    Applications
    • FacingFacing (18)
    • GroovingGrooving (1)
    • ID GroovingID Grooving (1)
    • ID Thread TurningID Thread Turning (5)
    • Multiple Direction CuttingMultiple Direction Cutting (18)
    • ProfilingProfiling (17)
    • TRN BoringTRN Boring (17)
    • ThreadingThreading (5)
    • TurningTurning (18)
    Type of Thread
    Type of Thread
    • 55 (3)
    • 60 (4)
    • ACME (2)
    • API RD (2)
    • BSPT (3)
    • BSW (3)
    • BUTTRESS (1)
    • M (3)
    • NPT (3)
    • NPTF (3)
    • RD DIN 405 (2)
    • STUB ACME (2)
    • TR DIN 103 (2)
    • UN (4)
    • UNJ (3)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (19)
    • Lightly Interrupted Cut (19)
    • Smooth Cut (19)
    • Varying Depth of Cut (19)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (4)
    • 93.0 (6)
    • 95.0 (12)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (19)
    • 2.0 (19)
    • 3.0 (3)
    • 4.0 (13)
    • 8.0 (3)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 1.969 in(3)
    • 2.362 in(4)
    • 2.757 in(7)
    • 3.15 in(5)
    • 3.543 in(3)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(3)
    • 60.0 mm(4)
    • 70.0 mm(7)
    • 80.0 mm(5)
    • 90.0 mm(3)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.001 in(2)
    • 0.002 in(3)
    • 0.003 in(3)
    • 0.004 in(20)
    • 0.006 in(2)
    • 0.008 in(21)
    • 0.01 in(1)
    • 0.016 in(18)
    • 0.02 in(1)
    • 0.028 in(1)
    • 0.03 in(1)
    • 0.031 in(19)
    • 0.037 in(1)
    • 0.039 in(1)
    • 0.047 in(12)
    • 0.049 in(1)
    • 0.06 in(1)
    • 0.062 in(3)
    • 0.063 in(5)
    • 0.069 in(1)
    • 0.094 in(1)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(2)
    • 0.05 mm(3)
    • 0.076 mm(3)
    • 0.1 mm(20)
    • 0.151 mm(2)
    • 0.2 mm(21)
    • 0.225 mm(1)
    • 0.4 mm(18)
    • 0.5 mm(1)
    • 0.701 mm(1)
    • 0.75 mm(1)
    • 0.775 mm(1)
    • 0.8 mm(18)
    • 0.925 mm(1)
    • 1.0 mm(1)
    • 1.201 mm(12)
    • 1.25 mm(1)
    • 1.5 mm(1)
    • 1.576 mm(3)
    • 1.6 mm(5)
    • 1.75 mm(1)
    • 2.375 mm(1)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (4)
    • 241 (3)
    • CG5 (5)
    • CL4 (3)
    • CM1 (5)
    • CM2 (4)
    • CM3 (3)
    • CM4 (3)
    • CPX (4)
    • CW2 (3)
    • CW2015 (4)
    • CW5025 (4)
    • GX (3)
    • HCK20 (1)
    • HCM15 (1)
    • HK1500 (3)
    • HT2 (3)
    • HTX (3)
    • K00331 (1)
    • K060 (4)
    • K090 (4)
    • K1 (3)
    • K10M (4)
    • K10P (4)
    • K10U (4)
    • K15 (3)
    • K15U (4)
    • K20K (4)
    • K21 (3)
    • K25M (4)
    • K25P (4)
    • K2885 (1)
    • K313 (19)
    • K35P (1)
    • K420 (5)
    • K45 (4)
    • K4H (1)
    • K68 (21)
    • KB1340 (3)
    • KB1345 (6)
    • KB1610 (15)
    • KB1625 (6)
    • KB1630 (11)
    • KB5610 (13)
    • KB5625 (9)
    • KB5630 (9)
    • KB9610 (14)
    • KB9640 (3)
    • KBH10 (4)
    • KBH10B (4)
    • KBH20 (13)
    • KBH20B (4)
    • KBK35 (3)
    • KC210 (4)
    • KC250 (9)
    • KC5010 (21)
    • KC5025 (22)
    • KC5410 (19)
    • KC5510 (4)
    • KC5525 (4)
    • KC710 (9)
    • KC720 (22)
    • KC722 (6)
    • KC730 (22)
    • KC7310 (8)
    • KC732 (18)
    • KC8050 (18)
    • KC810 (19)
    • KC850 (19)
    • KC9010 (15)
    • KC9025 (18)
    • KC910 (19)
    • KC9105 (15)
    • KC9110 (19)
    • KC9120 (15)
    • KC9125 (18)
    • KC9140 (4)
    • KC9145 (4)
    • KC9215 (4)
    • KC9225 (18)
    • KC9240 (18)
    • KC9240NEW (18)
    • KC9245 (4)
    • KC9315 (18)
    • KC9320 (16)
    • KC9325 (15)
    • KC935 (19)
    • KC950 (16)
    • KC990 (18)
    • KCD25 (15)
    • KCK05 (18)
    • KCK05B (6)
    • KCK15 (15)
    • KCK15B (15)
    • KCK20 (19)
    • KCK20B (19)
    • KCM15 (18)
    • KCM15B (13)
    • KCM25 (18)
    • KCM25B (15)
    • KCM35 (11)
    • KCM35B (3)
    • KCP05 (18)
    • KCP05B (4)
    • KCP10 (18)
    • KCP10B (19)
    • KCP25 (18)
    • KCP25B (19)
    • KCP25C (18)
    • KCP30 (18)
    • KCP30B (4)
    • KCP40 (4)
    • KCP40B (4)
    • KCPK05 (8)
    • KCS10 (17)
    • KCS10B (18)
    • KCU10 (19)
    • KCU10B (19)
    • KCU25 (19)
    • KCU25B (19)
    • KD050 (15)
    • KD081 (4)
    • KD100 (18)
    • KD105 (12)
    • KD120 (15)
    • KD1400 (18)
    • KD1405 (18)
    • KD1425 (18)
    • KM1 (3)
    • KMF (3)
    • KS15 (3)
    • KT1120 (3)
    • KT125 (8)
    • KT150 (8)
    • KT175 (19)
    • KT315 (19)
    • KT325 (3)
    • KTP10 (18)
    • KTP25S (4)
    • KU10 (9)
    • KU10T (19)
    • KU25T (3)
    • KU30T (16)
    • KY1310 (4)
    • KY1320 (4)
    • KY1540 (4)
    • KY1615 (4)
    • KY2000 (4)
    • KY2100 (4)
    • KY3000 (4)
    • KY3400 (4)
    • KY3500 (4)
    • KY4000 (3)
    • KY4300 (4)
    • KY4400 (4)
    • KYHK15B (4)
    • KYK10 (4)
    • KYK25 (4)
    • KYK35 (4)
    • KYS25 (4)
    • KYS30 (4)
    • NL200 (3)
    • NL250 (4)
    • NL300 (3)
    • NL400 (3)
    • NL920 (4)
    • P25 (5)
    • PB100 (3)
    • PB170 (3)
    • PB250 (3)
    • PB300 (3)
    • PS5 (3)
    • SP0819 (3)
    • SP3019 (3)
    • SP4019 (4)
    • SP4066 (1)
    • THM (4)
    • THM-X (3)
    • THMF-X (3)
    • TN10P (5)
    • TN10U (4)
    • TN15M (4)
    • TN15U (4)
    • TN2000 (3)
    • TN20K (4)
    • TN20P (4)
    • TN30M (4)
    • TN30P (4)
    • TN4000 (3)
    • TN5015 (4)
    • TN5020 (3)
    • TN5105 (4)
    • TN5120 (4)
    • TN6010 (5)
    • TN6025 (7)
    • TN7005 (4)
    • TN7010 (4)
    • TN7015 (4)
    • TN7025 (4)
    • TN7035 (3)
    • TN7105 (3)
    • TN7110 (5)
    • TN7115 (4)
    • TN7125 (3)
    • TN7135 (3)
    • TN8025 (4)
    • TTI15 (3)
    • TTR (3)
    • TTS (3)
    • TTX (3)
    • W00162 (4)
    • WBH10C (9)
    • WBH10P (13)
    • WBH10U (13)
    • WBH20P (4)
    • WBH25P (16)
    • WBH25U (4)
    • WBH30P (13)
    • WBK40U (3)
    • WBK45U (4)
    • WDN00U (18)
    • WDN25U (18)
    • WK05CT (4)
    • WK15CT (3)
    • WK20CT (15)
    • WM15CT (16)
    • WM25CT (13)
    • WM35CT (4)
    • WP05CT (3)
    • WP15CT (13)
    • WP25CT (18)
    • WP35CT (4)
    • WS10PT (4)
    • WS25PT (4)
    • WU10HT (4)
    • WU10PT (4)
    • WU25PT (3)
    • X00511 (3)
    • X00580 (3)
    • X00581 (3)
    • X00582 (3)
    • X00583 (3)
    • X00584 (3)
    • X00585 (3)
    • X00586 (3)
    • X00591 (3)
    • X00592 (3)
    • X00593 (3)
    • X00594 (3)
    • X00596 (3)
    • X00597 (3)
    • X00599 (3)
    Hand Of Tool
    Hand Of Tool
    • L (10)
    • R (12)
    Wiper Insert
    Wiper Insert
    • N (22)
    • Y (18)
    F Dimension
    F Dimension
    • 7.0 mm(3)
    • 9.0 mm(3)
    • 11.0 mm(3)
    • 13.0 mm(5)
    • 17.0 mm(8)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.276 in(3)
    • 0.354 in(3)
    • 0.433 in(3)
    • 0.512 in(5)
    • 0.669 in(8)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 13.0 mm(3)
    • 16.0 mm(3)
    • 18.5 mm(1)
    • 20.0 mm(2)
    • 25.0 mm(5)
    • 32.0 mm(8)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.512 in(3)
    • 0.63 in(3)
    • 0.728 in(1)
    • 0.787 in(2)
    • 0.984 in(5)
    • 1.26 in(8)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(1)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(1)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (12)
    • E (6)
    • S (4)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (4)
    • DOUBLE POSITIVE (3)
    • NEGATIVE-ZERO (2)
    • NEUTRAL (ZERO) (7)
    • POSITIVE-ZERO (6)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.379 in(3)
    • 1.655 in(2)
    • 1.701 in(2)
    • 2.205 in(2)
    • 2.283 in(4)
    • 2.362 in(6)
    • 2.953 in(3)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 35.0 mm(3)
    • 42.0 mm(2)
    • 43.2 mm(2)
    • 56.0 mm(2)
    • 58.0 mm(4)
    • 60.0 mm(6)
    • 75.0 mm(3)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Front-End
    Clamp Style
    Clamp Style
    • M (6)
    • N (1)
    • S (15)
    Cutting Width
    Cutting Width
    • 0.02 in(1)
    • 0.031 in(1)
    • 0.035 in(1)
    • 0.039 in(1)
    • 0.041 in(1)
    • 0.047 in(1)
    • 0.055 in(1)
    • 0.058 in(1)
    • 0.06 in(1)
    • 0.062 in(1)
    • 0.067 in(1)
    • 0.069 in(1)
    • 0.077 in(1)
    • 0.079 in(1)
    • 0.088 in(1)
    • 0.089 in(1)
    • 0.095 in(1)
    • 0.098 in(1)
    • 0.108 in(1)
    • 0.119 in(1)
    • 0.125 in(1)
    • 0.126 in(1)
    • 0.128 in(1)
    • 0.129 in(1)
    • 0.138 in(1)
    • 0.15 in(1)
    • 0.152 in(1)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(1)
    • 0.775 mm(1)
    • 0.8 mm(1)
    • 0.9 mm(1)
    • 1.0 mm(1)
    • 1.05 mm(1)
    • 1.201 mm(1)
    • 1.401 mm(1)
    • 1.475 mm(1)
    • 1.5 mm(1)
    • 1.576 mm(1)
    • 1.701 mm(1)
    • 1.75 mm(1)
    • 1.951 mm(1)
    • 2.0 mm(1)
    • 2.2 mm(1)
    • 2.225 mm(1)
    • 2.25 mm(1)
    • 2.401 mm(1)
    • 2.5 mm(1)
    • 2.75 mm(1)
    • 3.0 mm(1)
    • 3.176 mm(1)
    • 3.2 mm(1)
    • 3.25 mm(1)
    • 3.276 mm(1)
    • 3.5 mm(1)
    • 3.801 mm(1)
    • 3.85 mm(1)
    Cutting Width MintoCutting Width Max
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (12)
    • D-DIAMOND/RHOMBIC 55 (6)
    • LT-TRIANGLE LAY DOWN THREAD 60 (3)
    • TN-TOP NOTCH (1)
    Insert Size
    Insert Size
    • 2 (1)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.119 in(3)
    • 0.125 in(1)
    • 0.177 in(3)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 3.0 mm(3)
    • 3.176 mm(1)
    • 4.5 mm(3)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (15)
    • B L (18)
    • C A (4)
    • C N (4)
    • D P (18)
    • H T (19)
    • H W (22)
    Back-End
    System Size
    System Size
    • KM32 (19)
    • KM32TS (3)
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?