Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

M1200 Mini

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (101)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(95)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(101)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(101)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(101)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(101)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(101)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(101)
    • M Stainless Steel (101)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(101)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(101)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(101)
    • K Cast Iron (100)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(100)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(98)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(98)
    • N Non-Ferrous Materials (83)
      • N1
        Wrought Aluminum (83)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(83)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(83)
    • S High-Temp Alloys (99)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(96)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(96)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(96)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(99)
    • H Hardened Materials (80)
      • H1
        Hardened Materials 44-48 HRC(80)
    Select All Star
    • CN (33)
    • DE (53)
    • GB (17)
    • IN (8)
    • SG (43)
    • US (30)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (62)
    • Face MillingFace Milling (74)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(7)
    • 1.0 in(4)
    • 1.25 in(1)
    • 1.26 in(8)
    • 1.5 in(4)
    • 1.575 in(4)
    • 1.969 in(5)
    • 2.0 in(5)
    • 2.48 in(5)
    • 2.5 in(4)
    • 3.0 in(5)
    • 3.15 in(6)
    • 3.938 in(5)
    • 4.0 in(4)
    • 4.921 in(5)
    • 5.0 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(7)
    • 25.401 mm(4)
    • 31.75 mm(1)
    • 32.0 mm(8)
    • 38.1 mm(4)
    • 40.0 mm(4)
    • 50.0 mm(5)
    • 50.801 mm(5)
    • 63.0 mm(5)
    • 63.5 mm(4)
    • 76.2 mm(5)
    • 80.0 mm(6)
    • 100.0 mm(5)
    • 101.601 mm(4)
    • 125.0 mm(5)
    • 127.0 mm(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 33.725 mm(6)
    • 34.125 mm(3)
    • 39.125 mm(1)
    • 39.526 mm(1)
    • 40.475 mm(1)
    • 40.725 mm(6)
    • 46.151 mm(2)
    • 46.801 mm(1)
    • 46.825 mm(3)
    • 48.725 mm(2)
    • 52.25 mm(1)
    • 54.151 mm(1)
    • 56.75 mm(1)
    • 57.551 mm(1)
    • 58.7 mm(3)
    • 59.5 mm(3)
    • 64.15 mm(1)
    • 64.95 mm(1)
    • 69.75 mm(1)
    • 71.7 mm(3)
    • 72.2 mm(3)
    • 77.125 mm(1)
    • 77.625 mm(1)
    • 82.95 mm(1)
    • 84.9 mm(3)
    • 86.75 mm(2)
    • 88.7 mm(3)
    • 90.325 mm(1)
    • 94.125 mm(1)
    • 106.75 mm(2)
    • 108.351 mm(1)
    • 108.7 mm(3)
    • 110.301 mm(3)
    • 131.75 mm(2)
    • 133.701 mm(3)
    • 133.725 mm(1)
    • 135.701 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.328 in(6)
    • 1.344 in(3)
    • 1.54 in(1)
    • 1.556 in(1)
    • 1.594 in(1)
    • 1.603 in(6)
    • 1.817 in(2)
    • 1.843 in(1)
    • 1.844 in(3)
    • 1.919 in(2)
    • 2.057 in(1)
    • 2.132 in(1)
    • 2.234 in(1)
    • 2.266 in(1)
    • 2.311 in(3)
    • 2.343 in(3)
    • 2.527 in(1)
    • 2.557 in(1)
    • 2.746 in(1)
    • 2.823 in(3)
    • 2.843 in(3)
    • 3.036 in(1)
    • 3.056 in(1)
    • 3.266 in(1)
    • 3.343 in(3)
    • 3.415 in(2)
    • 3.492 in(3)
    • 3.556 in(1)
    • 3.706 in(1)
    • 4.203 in(2)
    • 4.266 in(1)
    • 4.28 in(3)
    • 4.343 in(3)
    • 5.187 in(2)
    • 5.264 in(3)
    • 5.265 in(1)
    • 5.343 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.701 mm(12)
    • 3.5 mm(49)
    • 4.7 mm(13)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.067 in(12)
    • 0.138 in(49)
    • 0.185 in(13)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.25 in(4)
    • 1.26 in(7)
    • 1.5 in(2)
    • 1.575 in(34)
    • 1.75 in(9)
    • 1.969 in(11)
    • 2.38 in(2)
    • 2.48 in(5)
    Reach MinkomuReach Max
    Reach
    Reach
    • 31.75 mm(4)
    • 32.0 mm(7)
    • 38.1 mm(2)
    • 40.0 mm(34)
    • 44.45 mm(9)
    • 50.0 mm(11)
    • 60.45 mm(2)
    • 63.0 mm(5)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 15.0 (12)
    • 45.0 (49)
    • 58.0 (13)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (47)
    • B-Cutter Retention Screw (5)
    • KL Screw (1)
    • Screw-On Connection (6)
    • Straight-Cylindrical (9)
    • Weldon (6)
    Number of Flutes
    Number of Flutes
    • 10 (2)
    • 12 (4)
    • 16 (1)
    • 2 (4)
    • 3 (11)
    • 4 (12)
    • 5 (15)
    • 6 (11)
    • 8 (11)
    • 9 (3)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 3.0 (57)
    • 12.0 (109)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(26)
    • 1.75 in(9)
    • 1.969 in(11)
    • 2.158 in(1)
    • 2.165 in(1)
    • 2.224 in(1)
    • 2.38 in(2)
    • 2.406 in(1)
    • 2.48 in(7)
    • 3.228 in(1)
    • 3.281 in(2)
    • 3.785 in(1)
    • 3.819 in(2)
    • 4.724 in(2)
    • 4.8 in(1)
    • 5.118 in(4)
    • 7.875 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(26)
    • 44.45 mm(9)
    • 50.0 mm(11)
    • 54.801 mm(1)
    • 55.0 mm(1)
    • 56.5 mm(1)
    • 60.45 mm(2)
    • 61.1 mm(1)
    • 63.0 mm(7)
    • 82.0 mm(1)
    • 83.301 mm(2)
    • 96.101 mm(1)
    • 97.0 mm(2)
    • 120.0 mm(2)
    • 121.926 mm(1)
    • 130.0 mm(4)
    • 200.0 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.047 in(104)
    • 0.052 in(57)
    • 0.126 in(79)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 1.201 mm(104)
    • 1.3 mm(57)
    • 3.2 mm(79)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM-U (76)
    • TN5515 (74)
    • TN6501 (75)
    • TN6505 (74)
    • TN6510 (76)
    • TN6520 (79)
    • TN6525 (76)
    • TN6540 (79)
    • TN7535 (74)
    • WK15CM (78)
    • WP25PM (78)
    • WP35CM (78)
    • WP40PM (79)
    • WS30PM (76)
    • WS40PM (80)
    • WU20PM (1)
    Hand Of Tool
    Hand Of Tool
    • R (74)
    Wiper Insert
    Wiper Insert
    • N (32)
    • Y (11)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.76 in(4)
    • 0.958 in(4)
    • 1.006 in(3)
    • 1.059 in(1)
    • 1.256 in(3)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 19.3 mm(4)
    • 24.3 mm(4)
    • 25.55 mm(3)
    • 26.901 mm(1)
    • 31.901 mm(3)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • H-HEXAGON 120 (43)
    Insert IC Size
    Insert IC Size
    • 12.701 mm(43)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.5 in(43)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.0 mm(1)
    • 6.775 mm(8)
    • 6.801 mm(16)
    • 6.825 mm(18)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.237 in(1)
    • 0.267 in(8)
    • 0.268 in(16)
    • 0.269 in(18)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (9)
    • HD (11)
    • LD (20)
    • MM (3)
    Cutting Tool Material
    Cutting Tool Material
    • H W (43)
    Tolerance Class
    Tolerance Class
    • G (20)
    • P (23)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (15)
    • SCREW-ON (6)
    • SHELL MILL (53)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(2)
    • 19.05 mm(11)
    • 19.075 mm(1)
    • 19.1 mm(1)
    • 20.0 mm(3)
    • 22.0 mm(14)
    • 25.0 mm(8)
    • 25.401 mm(6)
    • 27.0 mm(6)
    • 29.0 mm(6)
    • 32.0 mm(5)
    • 38.1 mm(6)
    • 40.0 mm(5)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(2)
    • 0.75 in(11)
    • 0.751 in(1)
    • 0.752 in(1)
    • 0.787 in(3)
    • 0.866 in(14)
    • 0.984 in(8)
    • 1.0 in(6)
    • 1.063 in(6)
    • 1.143 in(6)
    • 1.26 in(5)
    • 1.5 in(6)
    • 1.575 in(5)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    M1200 Mini 15°
    (47)

    M1200 Mini 15°

    M1200 Mini 60°
    (48)

    M1200 Mini 60°

    M1200 Mini 45°
    (92)

    M1200 Mini 45°

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberKatalogové číslo ISOKarbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?