Laydown Threading - Boring Bars

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (27)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
    • M Stainless Steel (27)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
    • K Cast Iron (27)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(27)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(27)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(27)
    • N Non-Ferrous Materials (27)
      • N1
        Wrought Aluminum (27)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(27)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(27)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (27)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (27)
      • N6
        Carbon, Graphite Composites, CFRP (27)
      • N7
        MMC's (27)
    • S High-Temp Alloys (27)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
    Select All Star
    • US (1)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (23)
    • OD Thread TurningOD Thread Turning (1)
    • TRN BoringTRN Boring (1)
    Type of Thread
    Type of Thread
    • 55 (25)
    • 60 (27)
    • BSW (22)
    • M (27)
    • NPT (9)
    • RD DIN 405 (19)
    • TR DIN 103 (19)
    • UN (22)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.938 in(2)
    • 6.0 in(2)
    • 7.0 in(4)
    • 7.087 in(7)
    • 7.875 in(3)
    • 9.843 in(6)
    • 10.0 in(3)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 100.0 mm(2)
    • 152.4 mm(2)
    • 177.8 mm(4)
    • 180.0 mm(7)
    • 200.0 mm(3)
    • 250.0 mm(6)
    • 254.0 mm(3)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.002 in(22)
    • 0.003 in(9)
    • 0.004 in(9)
    • 0.006 in(9)
    • 0.008 in(14)
    • 0.012 in(5)
    • 0.017 in(4)
    • 0.028 in(9)
    • 0.037 in(13)
    • 0.055 in(4)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(22)
    • 0.076 mm(9)
    • 0.1 mm(9)
    • 0.151 mm(9)
    • 0.2 mm(14)
    • 0.301 mm(5)
    • 0.426 mm(4)
    • 0.701 mm(9)
    • 0.925 mm(13)
    • 1.401 mm(4)
    Corner Radius MintoCorner Radius Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • HCK20 (9)
    • HCM15 (7)
    • K15 (26)
    • P25 (18)
    • TN6025 (27)
    Hand Of Tool
    Hand Of Tool
    • L (6)
    • R (21)
    F Dimension
    F Dimension
    • 7.101 mm(3)
    • 7.301 mm(1)
    • 7.4 mm(1)
    • 8.625 mm(1)
    • 8.9 mm(2)
    • 11.5 mm(2)
    • 11.675 mm(2)
    • 12.951 mm(2)
    • 13.4 mm(2)
    • 15.601 mm(1)
    • 16.1 mm(2)
    • 16.3 mm(2)
    • 16.5 mm(1)
    • 17.2 mm(1)
    • 17.401 mm(1)
    • 19.6 mm(1)
    • 21.5 mm(1)
    • 22.401 mm(1)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.28 in(3)
    • 0.288 in(1)
    • 0.291 in(1)
    • 0.34 in(1)
    • 0.351 in(2)
    • 0.453 in(2)
    • 0.46 in(2)
    • 0.51 in(2)
    • 0.528 in(2)
    • 0.614 in(1)
    • 0.634 in(2)
    • 0.642 in(2)
    • 0.65 in(1)
    • 0.677 in(1)
    • 0.685 in(1)
    • 0.772 in(1)
    • 0.846 in(1)
    • 0.882 in(1)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 12.701 mm(3)
    • 13.0 mm(2)
    • 16.0 mm(2)
    • 16.5 mm(1)
    • 20.0 mm(2)
    • 20.326 mm(2)
    • 22.85 mm(2)
    • 24.0 mm(2)
    • 27.0 mm(1)
    • 29.0 mm(4)
    • 30.475 mm(1)
    • 32.0 mm(2)
    • 36.0 mm(1)
    • 39.0 mm(1)
    • 40.0 mm(1)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.5 in(3)
    • 0.512 in(2)
    • 0.63 in(2)
    • 0.65 in(1)
    • 0.787 in(2)
    • 0.8 in(2)
    • 0.9 in(2)
    • 0.946 in(2)
    • 1.063 in(1)
    • 1.143 in(4)
    • 1.2 in(1)
    • 1.26 in(2)
    • 1.417 in(1)
    • 1.536 in(1)
    • 1.575 in(1)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (4)
    • S (23)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.25 in(1)
    • 1.26 in(1)
    • 1.5 in(1)
    • 1.575 in(1)
    • 1.891 in(1)
    • 2.25 in(2)
    • 2.362 in(4)
    • 2.5 in(1)
    • 3.0 in(1)
    • 3.15 in(4)
    • 3.75 in(1)
    • 3.938 in(3)
    • 4.5 in(1)
    • 5.039 in(3)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 31.75 mm(1)
    • 32.0 mm(1)
    • 38.1 mm(1)
    • 40.0 mm(1)
    • 48.0 mm(1)
    • 57.151 mm(2)
    • 60.0 mm(4)
    • 63.5 mm(1)
    • 76.2 mm(1)
    • 80.0 mm(4)
    • 95.25 mm(1)
    • 100.0 mm(3)
    • 114.301 mm(1)
    • 128.0 mm(3)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (4)
    • S (23)
    Front-End
    Clamp Style
    Clamp Style
    • C (4)
    • M (4)
    • S (19)
    Insert Shape
    Insert Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (23)
    • ON EDGE MISC (4)
    Back-End
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(2)
    • 12.0 mm(1)
    • 15.0 mm(1)
    • 15.875 mm(1)
    • 19.05 mm(5)
    • 20.0 mm(7)
    • 25.0 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(6)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(2)
    • 0.473 in(1)
    • 0.591 in(1)
    • 0.625 in(1)
    • 0.75 in(5)
    • 0.787 in(7)
    • 0.984 in(3)
    • 1.25 in(1)
    • 1.26 in(6)
    Back-End Diameter MintoBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.709 in(5)
    • 0.741 in(2)
    • 0.89 in(2)
    • 0.939 in(1)
    • 1.143 in(5)
    • 1.214 in(1)
    Shank Height MintoShank Height Max
    Shank Height
    Shank Height
    • 18.0 mm(5)
    • 18.825 mm(2)
    • 22.6 mm(2)
    • 23.826 mm(1)
    • 29.0 mm(5)
    • 30.826 mm(1)
    Shank Height MintoShank Height Max
    Shank Width
    Shank Width
    • 0.728 in(5)
    • 0.864 in(1)
    • 0.906 in(2)
    • 1.141 in(1)
    • 1.181 in(5)
    Shank Width MintoShank Width Max
    Shank Width
    Shank Width
    • 18.5 mm(5)
    • 21.951 mm(1)
    • 23.0 mm(2)
    • 28.951 mm(1)
    • 30.0 mm(5)
    Shank Width MintoShank Width Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?