Ranurado: Lateral
Fresado — Con refrigeración interna
Mango — Weldon cilíndrico 2 plano
Ranurado: TDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 2021382 |
| Referencia ISO | 12391603400 |
| Referencia ANSI | 12391603400 |
| Calidad | W |
| Diámetro de corte efectivo [D1] | 39.875 mm |
| Diámetro de corte efectivo [D1] | 1.57 in |
| Adaptador/Mango/Diá int [D] | 25 mm |
| Adaptador/Mango/Diá int [D] | .9843 in |
| Diámetro de cuello [D3] | 19 mm |
| Diámetro de cuello [D3] | .748 in |
| Longitud total [L] | 105 mm |
| Longitud total [L] | 4.134 in |
| Longitud utilizable [L3] | 49 mm |
| Longitud utilizable [L3] | 1.929 in |
| 1.ª profundidad de corte máxima [AP1MAX] | 17.85 mm |
| 1.ª profundidad de corte máxima [AP1MAX] | .703 in |
| Número de plaquitas | 4 |
| Número de canales [Z] | 2 |
| Calibre de plaquita | CPNT09T308T |
| Suministro de refrigerante | Y |
| Peso en kilogramos | 0.36 |
Ranurado: LateralFresado — Con refrigeración internaMango — Weldon cilíndrico 2 planoRanurado: TCrear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| Geometría | Calidad | Geometría | Calidad | Geometría | Calidad | |
| P1–P2 | CPNT | WP40PM | CPNT | WP40PM | CPNT | WP40PM |
| P3–P4 | CPNT | WP35CM | CPNT | WP35CM | CPNT | WP35CM |
| P5–P6 | CPNT | WP35CM | CPNT | WP40PM | CPNT | WP40PM |
| M1–M2 | CPNT | WP40PM | CPNT | WP40PM | CPNT | WP40PM |
| M3 | CPNT | TN7535 | CPNT | WP35CM | CPNT | WP35CM |
| K1–K2 | CPNT | WK15CM | CPNT | WK15CM | CPNT | WK15CM |
| K3 | CPNT | WK15CM | CPNT | WP35CM | CPNT | WP35CM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
| Geometría de plaquita | Avance por diente (fz) programado como % de la profundidad radial de corte (ae) | Geometría de plaquita | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| CPNT06 | 0,12 | 0,29 | 0,46 | 0,09 | 0,21 | 0,33 | 0,07 | 0,16 | 0,25 | 0,06 | 0,14 | 0,22 | 0,05 | 0,13 | 0,20 | CPNT06 |
| CPNT08 | 0,12 | 0,29 | 0,46 | 0,09 | 0,21 | 0,33 | 0,07 | 0,16 | 0,25 | 0,06 | 0,14 | 0,22 | 0,05 | 0,13 | 0,20 | CPNT08 |
| CPNT09 | 0,12 | 0,29 | 0,46 | 0,08 | 0,21 | 0,33 | 0,06 | 0,16 | 0,25 | 0,06 | 0,14 | 0,22 | 0,05 | 0,13 | 0,20 | CPNT09 |
| CPNT12 | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,32 | 0,06 | 0,16 | 0,28 | 0,05 | 0,15 | 0,25 | CPNT12 |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Grupo de materiales | THM | TTM08 | WK15CM | WP35CM | WP40PM | |||||||||||
| P | 0 | – | – | – | – | – | – | – | – | – | 455 | 395 | 370 | 295 | 260 | 245 |
| 1 | – | – | – | 230 | 200 | 190 | – | – | – | 455 | 395 | 370 | 295 | 260 | 245 | |
| 2 | – | – | – | 195 | 170 | 140 | – | – | – | 280 | 255 | 230 | 250 | 215 | 180 | |
| 3 | – | – | – | 180 | 150 | 125 | – | – | – | 255 | 230 | 205 | 230 | 195 | 160 | |
| 4 | – | – | – | 160 | 130 | 105 | – | – | – | 190 | 175 | 160 | 205 | 170 | 135 | |
| 5 | – | – | – | – | – | – | – | – | – | 260 | 230 | 210 | 170 | 155 | 135 | |
| 6 | – | – | – | – | – | – | – | – | – | 160 | 135 | 110 | 150 | 115 | 90 | |
| M | 1 | – | – | – | – | – | – | – | – | – | 205 | 185 | 155 | 195 | 170 | 155 |
| 2 | – | – | – | – | – | – | – | – | – | 185 | 160 | 140 | 175 | 150 | 125 | |
| 3 | – | – | – | – | – | – | – | – | – | 145 | 130 | 115 | 130 | 115 | 90 | |
| K | 1 | 120 | 90 | 75 | – | – | – | 420 | 385 | 340 | 295 | 265 | 240 | – | – | – |
| 2 | 125 | 100 | 70 | – | – | – | 335 | 295 | 275 | 235 | 210 | 190 | – | – | – | |
| 3 | 130 | 95 | 60 | – | – | – | 280 | 250 | 230 | 195 | 175 | 160 | – | – | – | |
| N | 1 | 900 | 600 | 500 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 685 | 465 | 385 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 450 | 280 | 200 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 35 | 30 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 35 | 30 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 | |
| 4 | – | – | – | – | – | – | – | – | – | 66 | 50 | 33 | 65 | 50 | 35 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?