Welcome
Please confirm your preferences
Update Preferences

Product Suggestions

Product Family suggestions

Contact a WIDIA Expert

Customer Support

Find customer support centers around the globe.

Quick Order
Item(s) successfully added to cart
View Cart

    GT Series

    Select Filters
    Filters
    Filters
      View filters in
      Metric
      Inch
      Key Filters
      Workpiece Material
      Workpiece Material
      • P Steel (192)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(159)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(167)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(167)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(88)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(25)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(88)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
      • M Stainless Steel (189)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(169)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(98)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(118)
      • K Cast Iron (51)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(51)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(50)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(18)
      • N Non-Ferrous Materials (165)
        • N1
          Wrought Aluminum (114)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(165)
        • N4
          Copper, Brass, Zinc-based on machinability index range of 70-100 (41)
      • S High-Temp Alloys (277)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(88)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(119)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(119)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(70)
      • H Hardened Materials (5)
        • H1
          Hardened Materials 44-48 HRC(5)
        • H2
          Hardened Materials 48-55 HRC(5)
      Select All Star
      • US (129)
      Applications
      Applications
      • Tapping Blind HoleTapping Blind Hole (344)
      • Tapping Through HoleTapping Through Hole (289)
      • ThreadingThreading (650)
      Cutting Length
      Cutting Length
      • 6.0 mm(3)
      • 7.0 mm(3)
      • 7.9 mm(16)
      • 8.0 mm(19)
      • 8.1 mm(8)
      • 9.0 mm(6)
      • 9.1 mm(17)
      • 10.0 mm(60)
      • 10.5 mm(1)
      • 11.0 mm(9)
      • 11.101 mm(29)
      • 11.201 mm(8)
      • 11.601 mm(10)
      • 11.8 mm(8)
      • 11.9 mm(4)
      • 12.0 mm(35)
      • 12.101 mm(11)
      • 12.201 mm(3)
      • 12.4 mm(26)
      • 12.701 mm(4)
      • 13.0 mm(27)
      • 13.101 mm(4)
      • 13.4 mm(7)
      • 14.0 mm(14)
      • 14.201 mm(14)
      • 14.9 mm(1)
      • 15.0 mm(53)
      • 15.101 mm(24)
      • 15.201 mm(10)
      • 16.0 mm(28)
      • 17.0 mm(3)
      • 18.0 mm(44)
      • 19.0 mm(5)
      • 19.6 mm(30)
      • 20.0 mm(27)
      • 21.0 mm(7)
      • 21.1 mm(2)
      • 22.0 mm(8)
      • 23.0 mm(6)
      • 23.1 mm(14)
      • 24.0 mm(3)
      • 25.0 mm(8)
      • 25.401 mm(12)
      • 26.0 mm(2)
      • 27.0 mm(3)
      • 30.0 mm(4)
      • 31.8 mm(4)
      • 32.0 mm(1)
      • 33.301 mm(1)
      • 35.0 mm(2)
      • 40.0 mm(1)
      • 40.401 mm(1)
      Cutting Length MintoCutting Length Max
      Cutting Length
      Cutting Length
      • 0.237 in(3)
      • 0.276 in(3)
      • 0.311 in(16)
      • 0.315 in(19)
      • 0.319 in(8)
      • 0.354 in(6)
      • 0.358 in(17)
      • 0.394 in(60)
      • 0.414 in(1)
      • 0.433 in(9)
      • 0.437 in(29)
      • 0.441 in(8)
      • 0.457 in(10)
      • 0.465 in(8)
      • 0.47 in(4)
      • 0.473 in(35)
      • 0.477 in(11)
      • 0.48 in(3)
      • 0.488 in(26)
      • 0.5 in(4)
      • 0.512 in(27)
      • 0.516 in(4)
      • 0.528 in(7)
      • 0.551 in(14)
      • 0.559 in(14)
      • 0.587 in(1)
      • 0.591 in(53)
      • 0.595 in(24)
      • 0.598 in(10)
      • 0.63 in(28)
      • 0.669 in(3)
      • 0.709 in(44)
      • 0.748 in(5)
      • 0.772 in(30)
      • 0.787 in(27)
      • 0.828 in(7)
      • 0.832 in(2)
      • 0.866 in(8)
      • 0.906 in(6)
      • 0.909 in(14)
      • 0.946 in(3)
      • 0.984 in(8)
      • 1.0 in(12)
      • 1.024 in(2)
      • 1.063 in(3)
      • 1.181 in(4)
      • 1.252 in(4)
      • 1.26 in(1)
      • 1.311 in(1)
      • 1.379 in(2)
      • 1.575 in(1)
      • 1.591 in(1)
      Cutting Length MintoCutting Length Max
      Type of Thread
      Type of Thread
      • M (313)
      • UNC (222)
      • UNF (115)
      Thread Size
      Thread Size
      • 1 - 8 (4)
      • 1/2 - 13 (21)
      • 1/2 - 20 (15)
      • 1/4 - 20 (28)
      • 1/4 - 28 (17)
      • 10 - 24 (16)
      • 10 - 32 (24)
      • 2 - 56 (11)
      • 3/4 - 10 (10)
      • 3/4 - 16 (4)
      • 3/8 - 16 (29)
      • 3/8 - 24 (13)
      • 4 - 40 (17)
      • 4 - 48 (2)
      • 5 - 40 (7)
      • 5/16 - 18 (22)
      • 5/16 - 24 (15)
      • 5/16- 24 (1)
      • 5/8 - 11 (11)
      • 5/8 - 18 (5)
      • 6 - 32 (19)
      • 6 - 40 (4)
      • 7/16 - 14 (10)
      • 7/16 - 20 (10)
      • 8 - 32 (18)
      • 8 - 36 (3)
      • 9/16 - 18 (1)
      • M10 X 1 (4)
      • M10 X 1,25 (9)
      • M10 X 1,5 (27)
      • M12 X 1,25 (6)
      • M12 X 1,5 (11)
      • M12 X 1,75 (28)
      • M14 X 1,5 (7)
      • M14 X 2 (10)
      • M16 X 1,5 (9)
      • M16 X 2 (16)
      • M18 X 1,5 (2)
      • M18 X 2 (1)
      • M2,5 X 0,45 (5)
      • M20 X 2,5 (8)
      • M24 X 3 (3)
      • M3 X 0,5 (22)
      • M3,5 X 0,6 (3)
      • M30 X 3,5 (2)
      • M36 X 4 (1)
      • M4 X 0,7 (24)
      • M5 X 0,8 (29)
      • M6 X 1 (38)
      • M7 X 1 (5)
      • M8 X 1 (8)
      • M8 X 1,25 (35)
      Thread Tolerance Class ANSI
      Thread Tolerance Class ANSI
      • 2BX (32)
      • 3BX (70)
      Thread Tolerance Class ISO
      Thread Tolerance Class ISO
      • 6H-I (32)
      • 6HX-I (178)
      Tap PD Class
      Tap PD Class
      • D10 (3)
      • D11 (3)
      • D12 (1)
      • D3 (13)
      • D4 (19)
      • D5 (34)
      • D6 (17)
      • D7 (2)
      • D8 (3)
      • D9 (8)
      • H2 (31)
      • H3 (139)
      • H4 (14)
      • H5 (39)
      • H6 (6)
      • H7 (6)
      Connection Style
      Connection Style
      • Cylindrical with Drive Square (645)
      Number of Flutes
      Number of Flutes
      • 0 (3)
      • 2 (95)
      • 3 (340)
      • 4 (136)
      • 5 (28)
      • 6 (48)
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.75 in(2)
      • 1.752 in(5)
      • 1.756 in(1)
      • 1.772 in(3)
      • 1.815 in(5)
      • 1.874 in(7)
      • 1.879 in(4)
      • 1.881 in(3)
      • 1.937 in(2)
      • 1.94 in(1)
      • 1.941 in(6)
      • 1.945 in(2)
      • 1.988 in(5)
      • 1.992 in(4)
      • 1.996 in(4)
      • 2.0 in(5)
      • 2.028 in(1)
      • 2.118 in(10)
      • 2.122 in(6)
      • 2.126 in(3)
      • 2.13 in(5)
      • 2.205 in(29)
      • 2.224 in(1)
      • 2.362 in(1)
      • 2.366 in(3)
      • 2.37 in(11)
      • 2.374 in(6)
      • 2.378 in(5)
      • 2.38 in(5)
      • 2.382 in(4)
      • 2.48 in(21)
      • 2.496 in(12)
      • 2.5 in(22)
      • 2.508 in(2)
      • 2.512 in(3)
      • 2.705 in(7)
      • 2.709 in(1)
      • 2.713 in(1)
      • 2.717 in(21)
      • 2.721 in(4)
      • 2.724 in(6)
      • 2.728 in(2)
      • 2.736 in(1)
      • 2.757 in(31)
      • 2.769 in(1)
      • 2.773 in(1)
      • 2.783 in(1)
      • 2.926 in(6)
      • 2.934 in(15)
      • 2.938 in(12)
      • 2.942 in(1)
      • 2.949 in(3)
      • 3.15 in(41)
      • 3.161 in(16)
      • 3.165 in(1)
      • 3.185 in(2)
      • 3.382 in(30)
      • 3.543 in(45)
      • 3.563 in(1)
      • 3.583 in(1)
      • 3.591 in(2)
      • 3.811 in(15)
      • 3.938 in(60)
      • 3.942 in(7)
      • 3.954 in(1)
      • 3.98 in(1)
      • 4.252 in(13)
      • 4.331 in(71)
      • 4.921 in(2)
      • 5.118 in(1)
      • 5.13 in(3)
      • 5.513 in(8)
      • 6.299 in(3)
      • 7.087 in(2)
      • 7.875 in(1)
      Over All Length [L] MintoOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 44.45 mm(2)
      • 44.5 mm(5)
      • 44.6 mm(1)
      • 45.0 mm(3)
      • 46.1 mm(5)
      • 47.6 mm(7)
      • 47.7 mm(4)
      • 47.75 mm(3)
      • 49.2 mm(2)
      • 49.276 mm(1)
      • 49.301 mm(6)
      • 49.401 mm(2)
      • 50.5 mm(5)
      • 50.6 mm(4)
      • 50.7 mm(4)
      • 50.801 mm(5)
      • 51.5 mm(1)
      • 53.801 mm(10)
      • 53.901 mm(6)
      • 54.0 mm(3)
      • 54.1 mm(5)
      • 56.0 mm(29)
      • 56.5 mm(1)
      • 60.0 mm(1)
      • 60.1 mm(3)
      • 60.2 mm(11)
      • 60.301 mm(6)
      • 60.401 mm(5)
      • 60.45 mm(5)
      • 60.5 mm(4)
      • 63.0 mm(21)
      • 63.401 mm(12)
      • 63.5 mm(22)
      • 63.7 mm(2)
      • 63.801 mm(3)
      • 68.7 mm(7)
      • 68.8 mm(1)
      • 68.9 mm(1)
      • 69.0 mm(21)
      • 69.101 mm(4)
      • 69.2 mm(6)
      • 69.3 mm(2)
      • 69.5 mm(1)
      • 70.0 mm(31)
      • 70.3 mm(1)
      • 70.4 mm(1)
      • 70.7 mm(1)
      • 74.3 mm(6)
      • 74.5 mm(15)
      • 74.601 mm(12)
      • 74.7 mm(1)
      • 74.9 mm(3)
      • 80.0 mm(41)
      • 80.301 mm(16)
      • 80.4 mm(1)
      • 80.9 mm(2)
      • 85.9 mm(30)
      • 90.0 mm(45)
      • 90.5 mm(1)
      • 91.0 mm(1)
      • 91.2 mm(2)
      • 96.801 mm(15)
      • 100.0 mm(60)
      • 100.101 mm(7)
      • 100.4 mm(1)
      • 101.101 mm(1)
      • 108.0 mm(13)
      • 110.0 mm(71)
      • 125.0 mm(2)
      • 130.0 mm(1)
      • 130.3 mm(3)
      • 140.0 mm(8)
      • 160.0 mm(3)
      • 180.0 mm(2)
      • 200.0 mm(1)
      Over All Length [L] MintoOver All Length [L] Max
      Application
      Coating
      Coating
      • CrC/C (99)
      • TiCN (86)
      • Uncoated (1)
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • WH36MG (6)
      • WN38MG (21)
      • WN44EG (78)
      • WN48EG (15)
      • WP31MG (28)
      • WS30MG (10)
      • WS32MG (5)
      • WS34MG (159)
      • WS39MG (92)
      • WU32MG (236)
      Tap Standard
      Tap Standard
      • ANSI (298)
      • DIN 2174 (29)
      • DIN 371 (78)
      • DIN 374 (29)
      • DIN 376 (51)
      • DIN-ANSI (149)
      Tap Type
      Tap Type
      • 11 (17)
      • 13 (55)
      • 3 (100)
      • 8 (478)
      Front-End
      Thread TPI
      Thread TPI
      • 8.0 (4)
      • 10.0 (10)
      • 11.0 (11)
      • 13.0 (21)
      • 14.0 (10)
      • 16.0 (33)
      • 18.0 (28)
      • 20.0 (53)
      • 24.0 (45)
      • 28.0 (17)
      • 32.0 (61)
      • 36.0 (3)
      • 40.0 (28)
      • 48.0 (2)
      • 56.0 (11)
      Thread TPI MintoThread TPI Max
      Thread Pitch
      Thread Pitch
      • 0.45 mm(5)
      • 0.5 mm(22)
      • 0.601 mm(3)
      • 0.701 mm(24)
      • 0.8 mm(29)
      • 1.0 mm(56)
      • 1.25 mm(49)
      • 1.5 mm(56)
      • 1.75 mm(28)
      • 2.0 mm(27)
      • 2.5 mm(8)
      • 3.0 mm(3)
      • 3.5 mm(2)
      • 4.0 mm(1)
      Thread Pitch MintoThread Pitch Max
      Thread Pitch
      Thread Pitch
      • 0.019 in(5)
      • 0.02 in(22)
      • 0.024 in(3)
      • 0.028 in(24)
      • 0.031 in(29)
      • 0.039 in(56)
      • 0.049 in(49)
      • 0.06 in(56)
      • 0.069 in(28)
      • 0.079 in(27)
      • 0.098 in(8)
      • 0.119 in(3)
      • 0.138 in(2)
      • 0.157 in(1)
      Thread Pitch MintoThread Pitch Max
      Chamfer Form
      Chamfer Form
      • FB (80)
      • PC (270)
      • SB (300)
      Back-End
      Back-End Diameter
      Back-End Diameter
      • 3.5 mm(9)
      • 3.575 mm(81)
      • 4.275 mm(34)
      • 4.5 mm(11)
      • 4.926 mm(53)
      • 6.0 mm(40)
      • 6.075 mm(1)
      • 6.476 mm(61)
      • 7.0 mm(5)
      • 8.0 mm(20)
      • 8.076 mm(63)
      • 8.201 mm(20)
      • 9.0 mm(27)
      • 9.326 mm(53)
      • 9.675 mm(58)
      • 10.0 mm(19)
      • 10.9 mm(2)
      • 11.0 mm(16)
      • 12.0 mm(23)
      • 12.201 mm(19)
      • 14.0 mm(3)
      • 14.976 mm(14)
      • 16.0 mm(8)
      • 18.0 mm(3)
      • 20.326 mm(4)
      • 22.0 mm(2)
      • 28.0 mm(1)
      Back-End Diameter MintoBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.138 in(9)
      • 0.142 in(81)
      • 0.168 in(34)
      • 0.177 in(11)
      • 0.194 in(53)
      • 0.237 in(40)
      • 0.24 in(1)
      • 0.255 in(61)
      • 0.276 in(5)
      • 0.315 in(20)
      • 0.318 in(63)
      • 0.323 in(20)
      • 0.354 in(27)
      • 0.367 in(53)
      • 0.381 in(58)
      • 0.394 in(19)
      • 0.429 in(2)
      • 0.433 in(16)
      • 0.473 in(23)
      • 0.48 in(19)
      • 0.551 in(3)
      • 0.59 in(14)
      • 0.63 in(8)
      • 0.709 in(3)
      • 0.8 in(4)
      • 0.866 in(2)
      • 1.102 in(1)
      Back-End Diameter MintoBack-End Diameter Max
      No filters matching ""
      GT30 • Metric DIN 371, 374, and 376 • Form C Semi-Bottoming Chamfer
      (27)

      GT30 • Metric DIN 371, 374, and 376 • Form C Semi-Bottoming Chamfer

      GT31 • Metric DIN 371 and 376 • Form C Semi-Bottoming Chamfer • Through Coolant
      (9)

      GT31 • Metric DIN 371 and 376 • Form C Semi-Bottoming Chamfer • Through Coolant

      GT20 • Metric DIN 371, 374, and 376 • Form D Plug Chamfer
      (31)

      GT20 • Metric DIN 371, 374, and 376 • Form D Plug Chamfer

      GT30 • Metric ANSI • Form C Semi-Bottoming Chamfer • Steel and Stainless Steel
      (57)

      GT30 • Metric ANSI • Form C Semi-Bottoming Chamfer • Steel and Stainless Steel

      GT86 • Machine Screw and Fractional • Form C Semi-Bottom Chamfer • DIN Length ANSI Shank • Wrought and Cast Aluminum
      (14)

      GT86 • Machine Screw and Fractional • Form C Semi-Bottom Chamfer • DIN Length ANSI Shank • Wrought and Cast Aluminum

      GT82 • Machine Screw and Fractional • Form C Semi-Bottom Chamfer • DIN Length ANSI Shank • Wrought and Cast Aluminum
      (19)

      GT82 • Machine Screw and Fractional • Form C Semi-Bottom Chamfer • DIN Length ANSI Shank • Wrought and Cast Aluminum

      GT72 • Machine Screw and Fractional • Form B Plug Chamfer • DIN Length ANSI Shank • Wrought and Cast Aluminum
      (16)

      GT72 • Machine Screw and Fractional • Form B Plug Chamfer • DIN Length ANSI Shank • Wrought and Cast Aluminum

      GT72 • Form B Plug Chamfer • Metric • DIN Length ANSI Shank • Wrought and Cast Aluminum
      (12)

      GT72 • Form B Plug Chamfer • Metric • DIN Length ANSI Shank • Wrought and Cast Aluminum

      GT90 • Machine Screw and Fractional • Form D Plug Chamfer • Nickel- and Cobalt-Based Alloys
      (33)

      GT90 • Machine Screw and Fractional • Form D Plug Chamfer • Nickel- and Cobalt-Based Alloys

      GT92 • Machine Screw and Fractional • 3-4 Pitches Chamfer • Nickel- and Cobalt-Based Alloys
      (36)

      GT92 • Machine Screw and Fractional • 3-4 Pitches Chamfer • Nickel- and Cobalt-Based Alloys

      GT24 • Metric • DIN Length ANSI Shank • Form C Semi-Bottoming Entry Taper • Roll Form Taps • Steel and Stainless Steel
      (9)

      GT24 • Metric • DIN Length ANSI Shank • Form C Semi-Bottoming Entry Taper • Roll Form Taps • Steel and Stainless Steel

      GT26 • DIN Length ANSI Shank • Form E Bottoming Entry Taper • Machine Screw and Fractional • Roll Form Taps • Steel and Stainless Steel
      (23)

      GT26 • DIN Length ANSI Shank • Form E Bottoming Entry Taper • Machine Screw and Fractional • Roll Form Taps • Steel and Stainless Steel

      GT26 • Metric • DIN Length ANSI Shank • Form E Bottoming Entry Taper • Roll Form Taps • Steel and Stainless Steel
      (8)

      GT26 • Metric • DIN Length ANSI Shank • Form E Bottoming Entry Taper • Roll Form Taps • Steel and Stainless Steel

      GT86 • Form C Semi-Bottom Chamfer • Metric • DIN Length ANSI Shank • Wrought and Cast Aluminum
      (8)

      GT86 • Form C Semi-Bottom Chamfer • Metric • DIN Length ANSI Shank • Wrought and Cast Aluminum

      GT90 • Form D Plug Chamfer • Metric ANSI • Nickel- and Cobalt-Based Alloys
      (19)

      GT90 • Form D Plug Chamfer • Metric ANSI • Nickel- and Cobalt-Based Alloys

      GT92 • 3-4 Pitches Chamfer • Metric ANSI • Nickel- and Cobalt-Based Alloys
      (13)

      GT92 • 3-4 Pitches Chamfer • Metric ANSI • Nickel- and Cobalt-Based Alloys

      You are about to add to your My Solutions page. Do you want to proceed?
      Select the destination where you want to move to.
      New Folder
        • Applied Filters:
        • Clear All

      A folder with the name already exists.

      Please enter a valid name
      product-image
      Please adjust the following properties from

      ISO Catalog Number

      ANSI Catalog Number

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      You should be logged to see your dashboard information
      Session expired due to inactivity, please login again
      The product/s () you were trying to add to the cart is/are not available, please contact customer service
      item(s) successfully added to the cart
      View Cart

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material Number ISO Catalog Number Grade  

      You are about to leave the Solution building process.

      Are you sure you want to leave?

      Workpiece Selection

      Standard

      ALL

      Material

      Select a Value

      Hardness

      --

          Hardness Scale

          --

            Permitted Groups :

            Group

            SubGroup

            Hardness (HB)

            Hardness (HRC)

            CancelOk