100018357
Spiral Circular
Fraisage hélicoïdal
Ramping : Ébauche
Queue — à vis
Counter Boring
Usinage de poches
Fraisage en plongée
Inclined Square End MillDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 6596723 |
| Ref. ISO Catalogue | VXF032Z03M16XD12 |
| Ref. ANSI Catalogue | VXF032Z03M16XD12 |
| [D1MAX] Diamètre de coupe maximal | 32 mm |
| [D1MAX] Diamètre de coupe maximal | 1.259 in |
| [D1] Diamètre effectif de coupe | 13.875 mm |
| [D1] Diamètre effectif de coupe | .5463 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 29 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | 1.141 in |
| [DPM] Diamètre du pilote du côté machine | 16.988 mm |
| [DPM] Diamètre du pilote du côté machine | .6688 in |
| [G3X] Taille du filetage de connexion externe | M16 |
| [L2] Longueur de tête | 43 mm |
| [L2] Longueur de tête | 1.692 in |
| [WF] Largeur du méplat | 23.95 mm |
| [WF] Largeur du méplat | .9429 in |
| [AP1MAX] 1re profondeur de coupe maximale | 2.5 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .0985 in |
| Nombre de plaquettes | 3 |
| Angle de ramping maximum | 1.8 |
| T/Min max | 31500 |
| Alimentation en arrosage | Y |
| Poids en kilogrammes | 0.19 |
100018357Spiral CircularFraisage hélicoïdalRamping : ÉbaucheQueue — à visCounter BoringUsinage de pochesFraisage en plongéeInclined Square End MillCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| P3–P4 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| P5–P6 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| M1–M2 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| M3 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| S1–S2 | XDPT-MM | WP25PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| S3 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| S4 | XDPT-MM | WS40PM | XDPT-MM | WS40PM | XDPT-MH | WP40PM |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
| .E..MM | 0,43 | 1,39 | 2,20 | 0,31 | 0,99 | 1,56 | 0,23 | 0,74 | 1,15 | 0,20 | 0,64 | 1,00 | 0,19 | 0,59 | 0,92 | .E..MM |
| .S..MH | 0,62 | 1,57 | 2,41 | 0,45 | 1,12 | 1,70 | 0,33 | 0,84 | 1,26 | 0,29 | 0,73 | 1,10 | 0,27 | 0,67 | 1,00 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
| .E..MM | 0,49 | 1,59 | 2,52 | 0,35 | 1,13 | 1,78 | 0,26 | 0,84 | 1,31 | 0,23 | 0,73 | 1,14 | 0,21 | 0,67 | 1,04 | .E..MM |
| .S..MH | 0,70 | 1,80 | 2,76 | 0,51 | 1,28 | 1,94 | 0,38 | 0,95 | 1,44 | 0,33 | 0,83 | 1,25 | 0,30 | 0,76 | 1,14 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40–100 % | ||||||||||||
| .E..MM | 0,36 | 1,15 | 1,81 | 0,26 | 0,83 | 1,29 | 0,19 | 0,62 | 0,96 | 0,17 | 0,54 | 0,83 | 0,15 | 0,49 | 0,76 | .E..MM |
| .S..MH | 0,51 | 1,30 | 1,99 | 0,37 | 0,93 | 1,41 | 0,28 | 0,70 | 1,05 | 0,24 | 0,61 | 0,91 | 0,22 | 0,55 | 0,83 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..MM | .018 | .051 | .094 | .013 | .035 | .059 | .009 | .025 | .042 | .008 | .022 | .037 | .007 | .020 | .033 | .E..MM |
| .S..MH | .032 | .070 | .118 | .023 | .046 | .071 | .017 | .033 | .050 | .014 | .029 | .043 | .013 | .026 | .039 | .S..MH |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..MM | .020 | .058 | .109 | .014 | .039 | .067 | .010 | .028 | .047 | .009 | .025 | .041 | .008 | .022 | .037 | .E..MM |
| .S..MH | .036 | .080 | .141 | .025 | .052 | .080 | .019 | .037 | .056 | .016 | .032 | .048 | .015 | .029 | .043 | .S..MH |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..MM | .015 | .043 | .076 | .011 | .029 | .050 | .008 | .022 | .036 | .007 | .019 | .031 | .006 | .017 | .028 | .E..MM |
| .S..MH | .027 | .058 | .093 | .019 | .039 | .059 | .014 | .028 | .042 | .012 | .024 | .036 | .011 | .022 | .033 | .S..MH |
| Material Group | WP25PM | WP40PM | WS40PM | |||||||
| P | 1 | 395 | 340 | 325 | 355 | 310 | 295 | – | – | – |
| 2 | 330 | 290 | 240 | 300 | 260 | 215 | – | – | – | |
| 3 | 305 | 260 | 210 | 275 | 235 | 190 | – | – | – | |
| 4 | 270 | 220 | 180 | 245 | 205 | 160 | – | – | – | |
| 5 | 220 | 205 | 180 | 205 | 185 | 160 | 205 | 175 | 145 | |
| 6 | 200 | 150 | 120 | 180 | 140 | 110 | 180 | 130 | 95 | |
| M | 1 | 245 | 215 | 200 | 235 | 205 | 185 | 250 | 205 | 170 |
| 2 | 220 | 190 | 155 | 210 | 180 | 150 | 215 | 175 | 145 | |
| 3 | 170 | 145 | 115 | 155 | 140 | 110 | 175 | 130 | 100 | |
| S | 1 | 50 | 40 | 30 | 50 | 40 | 35 | 50 | 40 | 30 |
| 2 | 50 | 40 | 30 | 50 | 40 | 35 | 50 | 40 | 30 | |
| 3 | 60 | 50 | 30 | 60 | 50 | 35 | 60 | 50 | 30 | |
| 4 | 85 | 60 | 40 | 80 | 60 | 40 | 70 | 60 | 35 | |
| Material Group | WP25PM | WP40PM | WS40PM | |||||||
| P | 1 | 1295 | 1115 | 1065 | 1165 | 1015 | 970 | – | – | – |
| 2 | 1085 | 950 | 785 | 985 | 855 | 705 | – | – | – | |
| 3 | 1000 | 855 | 690 | 900 | 770 | 625 | – | – | – | |
| 4 | 885 | 720 | 590 | 805 | 675 | 525 | – | – | – | |
| 5 | 720 | 675 | 590 | 675 | 605 | 525 | 675 | 575 | 475 | |
| 6 | 655 | 490 | 395 | 590 | 460 | 360 | 590 | 425 | 310 | |
| M | 1 | 805 | 705 | 655 | 770 | 675 | 605 | 820 | 675 | 560 |
| 2 | 720 | 625 | 510 | 690 | 590 | 490 | 705 | 575 | 475 | |
| 3 | 560 | 475 | 375 | 510 | 460 | 360 | 575 | 425 | 330 | |
| S | 1 | 165 | 130 | 100 | 165 | 130 | 115 | 165 | 130 | 100 |
| 2 | 165 | 130 | 100 | 165 | 130 | 115 | 165 | 130 | 100 | |
| 3 | 195 | 165 | 100 | 195 | 165 | 115 | 195 | 165 | 100 | |
| 4 | 280 | 195 | 130 | 260 | 195 | 130 | 230 | 195 | 115 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?