Downloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 5541819 |
| Ref. ISO Catalogue | TCF040203ACV36 |
| Ref. ANSI Catalogue | TCF040203ACV36 |
| Nuance | WU25CH |
| [D] Taille de plaquette CI | 4.47 mm |
| [D] Taille de plaquette CI | .176 in |
| [D1] Taille du trou de la plaquette | 2.1 mm |
| [D1] Taille du trou de la plaquette | .083 in |
| [W] Largeur de coupe | 3.65 mm |
| [W] Largeur de coupe | .144 in |
| [S] Épaisseur de la plaquette | 2 mm |
| [S] Épaisseur de la plaquette | .079 in |
| [RR] Rayon de bec | 0.3 mm |
| [RR] Rayon de bec | .011 in |
| Dimension de plaquette | A |
Grades
WU25CH
材质结构：先进的 CVD TiCN-Al2O3 涂层搭配新设计的韧性硬质合金基体。确保足够的抗变形性和出色的强度，
并可在广泛的加工条件下提供非常好的耐磨性。
应用：高效，适用于高速和大进给量的情况。在钢、不锈钢
和铸铁方面具有卓越的可靠性，是高效材质的首选。
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Groupe Matières | Géométrie | Travaux légers | Applications générales | Travaux lourds | |||
| Plaquette périphérique | Plaquette centrale | Plaquette périphérique | Plaquette centrale | Plaquette périphérique | Plaquette centrale | ||
| P1 | V38/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P2–P4 | V34/DU | WPK10CH | WU40PH/WU20PH | WU25CH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| P5–P6 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| M1–M3 | V36/DU | WU25CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| K1–K3 | V34/DU | WPK10CH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| N1–N4 | V36 | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH | WN10PH |
| S1–S4 | V38/DU | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH | WU40PH/WU20PH |
| Groupe Matières | Géométrie | Nuance | Vitesse de coupe | Diamètre d'outil | |||||||
| Inter | Exter | Mini | Départ | Maxi | |||||||
| –V38 | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/tr | – | – | 0,07–0,10 | 0,08–0,10 | |
| –V38 | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/tr | – | – | 0,07–0,11 | 0,08–0,11 | |
| –V34 | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/tr | – | – | 0,07–0,12 | 0,08–0,13 | |
| –V34 | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 | |||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/tr | – | – | 0,08–0,13 | 0,09–0,15 | |
| –V34 | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/tr | – | – | 0,08–0,13 | 0,09–0,15 | |
| –V36 | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/tr | – | – | 0,07–0,11 | 0,08–0,12 | |
| 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/tr | – | – | 0,07–0,11 | 0,08–0,12 | |
| 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/tr | – | – | 0,06–0,09 | 0,07–0,10 | |
| –V38 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | |||||||
| –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/tr | – | – | 0,06–0,09 | 0,07–0,10 | |
| 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/tr | – | – | 0,06–0,09 | 0,07–0,10 | |
| 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/tr | – | – | 0,07–0,13 | 0,09–0,18 | |
| –V34 | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | |||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/tr | – | – | 0,07–0,13 | 0,09–0,18 | |
| 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/tr | – | – | 0,07–0,13 | 0,09–0,18 | |
| 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | ||||||||
| –V36 | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 | |||||||
| 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 | ||||||||
| 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 | ||||||||
| –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/tr | – | – | 0,07–0,11 | 0,09–0,14 | |
| –V38 | 0,08–0,12 | 0,08–0,13 | 0,10 –0,15 | 0,12–0,19 | |||||||
| –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/tr | – | – | 0,07–0,11 | 0,09–0,14 | |
| Groupe Matières | Géométrie | Nuance | Vitesse de coupe | Diamètre d'outil | |||||||
| Inter | Exter | Mini | Départ | Maxi | |||||||
| –V38 | 0,13–0,16 | 0,15–0,18 | 0,16–0,23 | 0,17–0,24 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/tr | 0,09–0,12 | 0,11–0,13 | – | – | |
| –V38 | 0,13–0,17 | 0,15–0,19 | 0,16–0,24 | 0,17–0,25 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/tr | 0,09–0,13 | 0,11–0,14 | – | – | |
| –V34 | 0,13–0,20 | 0,15–0,21 | 0,16–0,28 | 0,17–0,30 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/tr | 0,09–0,15 | 0,11–0,15 | – | – | |
| –V34 | 0,16–0,24 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 | |||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 250 | mm/tr | 0,12–0,16 | 0,12–0,18 | – | – | |
| –V34 | 0,14–0,22 | 0,16–0,24 | 0,18–0,30 | 0,19–0,32 | |||||||
| –DU | WU20PH | WU20PH | 90 | 150 | 250 | mm/tr | 0,12–0,16 | 0,12–0,18 | – | – | |
| –V36 | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | |||||||
| –DU | WU20PH | WU20PH | 90 | 140 | 200 | mm/tr | 0,09–0,13 | 0,11–0,15 | – | – | |
| 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,29 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 120 | 160 | mm/tr | 0,09–0,13 | 0,11–0,15 | – | – | |
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 120 | 190 | mm/tr | 0,09–0,13 | 0,10–0,15 | – | – | |
| –V38 | 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | |||||||
| –DU | WU20PH | WU20PH | 90 | 110 | 160 | mm/tr | 0,09–0,13 | 0,10–0,15 | – | – | |
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 90 | 160 | mm/tr | 0,09–0,13 | 0,10–0,15 | – | – | |
| 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | ||||||||
| –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/tr | 0,10–0,19 | 0,12–0,22 | – | – | |
| –V34 | 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | |||||||
| –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/tr | 0,10–0,19 | 0,12–0,22 | – | – | |
| 0,14–0,26 | 0,16–0,30 | 0,18–0,32 | 0,20–0,36 | ||||||||
| –DU | WU20PH | WU20PH | 80 | 130 | 190 | mm/tr | 0,10–0,19 | 0,12–0,22 | – | – | |
| 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | ||||||||
| –V36 | 0,13–0,18 | 0,15–0,20 | 0,16–0,28 | 0,17–0,30 | |||||||
| 0,12–0,17 | 0,14–0,21 | 0,16–0,23 | 0,16–0,24 | ||||||||
| 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 | ||||||||
| –DU | WU20PH | WU20PH | 20 | 25 | 40 | mm/tr | 0,10–0,15 | 0,12–0,18 | – | – | |
| –V38 | 0,14–0,21 | 0,16–0,24 | 0,18–0,26 | 0,20–0,30 | |||||||
| –DU | WU20PH | WU20PH | 30 | 35 | 50 | mm/tr | 0,10–0,15 | 0,12–0,18 | – | – | |
| Avanzamento al giro consigliato | |||||||||||
| Nuance | Vitesse de coupe | ||||||||||
| Groupe Matières | Géométrie | Inter | Exter | Mini | Départ | Maxi | Diamètre d'outil | 12,00 | 14,00 | 19,00 | 24,00 |
| P0 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,08 | 0,08–0,11 | 0,10–0,13 | 0,11–0,14 |
| P0 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.10 | 0.08–0.10 |
| P1 | –V38 | WU40PH | WU25CH | 120 | 180 | 260 | mm/rev | 0,06–0,10 | 0,08–0,13 | 0,10–0,15 | 0,11–0,16 |
| P1 | –DU | WU20PH | WU20PH | 90 | 150 | 200 | mm/rev | – | – | 0.07–0.11 | 0.08–0.11 |
| P2 | –V34 | WU40PH | WU25CH | 120 | 190 | 280 | mm/rev | 0,06–0,10 | 0,08–0,15 | 0,10–0,16 | 0,11–0,17 |
| P2 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.12 | 0.08–0.13 |
| P3 | –V34 | WU40PH | WPK10CH | 120 | 200 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P3 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P4 | –V34 | WU40PH | WPK10CH | 120 | 190 | 310 | mm/rev | 0,08–0,15 | 0,10–0,16 | 0,11–0,18 | 0,12–0,20 |
| P4 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.08–0.13 | 0.09–0.15 |
| P5 | –V36 | WU40PH | WU25CH | 120 | 180 | 250 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P5 | –DU | WU20PH | WU20PH | 90 | 150 | 220 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| P6 | -V36 | WU40PH | WU25CH | 120 | 160 | 210 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| P6 | –DU | WU20PH | WU20PH | 90 | 130 | 165 | mm/rev | – | – | 0.07–0.11 | 0.08–0.12 |
| M1 | -V38 | WU40PH | WU40PH | 120 | 160 | 240 | mm/rev | 0,06–0,11 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M1 | –DU | WU20PH | WU20PH | 90 | 130 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M2 | –V38 | WU40PH | WU40PH | 110 | 140 | 210 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M2 | –DU | WU20PH | WU20PH | 110 | 140 | 190 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| M3 | -V36 | WU40PH | WU40PH | 100 | 120 | 200 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| M3 | –DU | WU20PH | WU20PH | 80 | 100 | 160 | mm/rev | – | – | 0.06–0.09 | 0.07–0.10 |
| K1 | -V34 | WU25CH | WPK10CH | 120 | 200 | 280 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K1 | –DU | WU20PH | WU20PH | 90 | 160 | 220 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K2 | –V34 | WU40PH | WPK10CH | 100 | 180 | 260 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K2 | –DU | WU20PH | WU20PH | 80 | 140 | 200 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| K3 | -V34 | WU40PH | WPK10CH | 100 | 170 | 240 | mm/rev | 0,08–0,14 | 0,08–0,16 | 0,10–0,18 | 0,12–0,24 |
| K3 | –DU | WU20PH | WU20PH | 80 | 140 | 190 | mm/rev | – | – | 0.07–0.13 | 0.09–0.18 |
| N1 | -V36 | WN10PH | WN10PH | 250 | 350 | 500 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N2 | –V36 | WN10PH | WN10PH | 150 | 300 | 450 | mm/rev | 0,06–0,10 | 0,08–0,14 | 0,10–0,15 | 0,11–0,16 |
| N3 | -V36 | WN10PH | WN10PH | 80 | 120 | 150 | mm/rev | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | 0,10–0,14 |
| S3 | -V38 | WU40PH | WU40PH | 20 | 30 | 45 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10–0,15 | 0,12–0,19 |
| S3 | –DU | WU20PH | WU20PH | 20 | 30 | 40 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| S4 | –V38 | WU40PH | WU40PH | 35 | 40 | 65 | mm/rev | 0,08–0,12 | 0,08–0,13 | 0,10 –0,15 | 0,12–0,19 |
| S4 | –DU | WU20PH | WU20PH | 30 | 40 | 60 | mm/rev | – | – | 0.07–0.11 | 0.09–0.14 |
| dimension de la plaquette | Plage de diamètres mm (in) | 2 x D/3 x D | 4 x D | 5 x D | ||||||
| Valeur du déport X maxi en mm (maxi en Inch) | D1 maxi mm (in) | Tolérance d'alésage mm (in) | Valeur du déport X maxi en mm (maxi en Inch) | D1 maxi mm (in) | Tolérance d'alésage mm (in) | Valeur du déport X maxi en mm (maxi en Inch) | D1 maxi mm (in) | Tolérance d'alésage mm (in) | ||
| A | 12,00 | 0,5 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | 0,5 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | 0,5 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | 0,8 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | 0,8 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 37,00 | 0,8 | D1 + 1,6mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | 1 | D1 + 2mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | 1 | D1 + 2mm | +/- 0,28 | 0,8 | D1 + 1mm | +/- 0,42 | +/- 0,42 | ||
| dimension de la plaquette | Plage de diamètres (mm) | 2 x D et 3 x D | 4 x D | 5 x D | |||
| valeur du déport X | valeur de | valeur du déport X | valeur de | valeur du déport | valeur de | ||
| A | 12,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| B | 14,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| C | 19,00 | 0,5 | D1 + 1mm | 0,5 | D1 + 1mm | ||
| D | 24,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| E | 30,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| F | 37,00 | 0,8 | D1 + 1,6mm | 0,8 | D1 + 1mm | ||
| G | 46,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| H | 57,00 | 1 | D1 + 2mm | 0,8 | D1 + 1mm | ||
| dimension de la plaquette | Plage de diamètres mm (in) | 2 x D/3 x D | 4 x D | 5 x D | |||||
| D1 maxi mm (in) | Tolérance d'alésage mm (in) | Valeur du déport X maxi en mm (maxi en Pouces) | D1 maxi mm (in) | Tolérance d'alésage mm (in) | Valeur du déport X maxi en mm (maxi en Pouces) | D1 maxi mm (in) | Tolérance d'alésage mm (in) | ||
| A | 12,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| B | 14,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| C | 19,00 | D1 + 1mm | +/- 0,20 | 0,5 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| D | 24,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| E | 30,00 | D1 + 1,6mm | +/- 0,20 | 0,8 | D1 + 1mm | +/- 0,35 | +/- 0,35 | ||
| F | 37,00 | D1 + 1,6mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| G | 46,00 | D1 + 2mm | +/- 0,25 | 0,8 | D1 + 1mm | +/- 0,38 | +/- 0,38 | ||
| H | 57,00 | D1 + 2mm | +/- 0,28 | 0,8 | D1 + 1mm | +/- 0,42 | +/- 0,42 | ||
| Avance par tour recommandée | |||||||||||
| Groupe Matières | Géométrie | Nuance | Vitesse de coupe | Diamètre d'outil | 0,473 | 0,563 | 0,750 | 0,969 | |||
| Inter | Exter | Mini | Départ | Maxi | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0,0031 | 0,0039 | 0,0043 | 0,0047 |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0,0031 | 0,0039 | 0,0043 | 0,0047 |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0,0024 | 0,0031 | 0,0039 | 0,0043 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0,0024 | 0,0028 | 0,0031 | 0,0039 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0,0031 | 0,0031 | 0,0039 | 0,0047 |
| Groupe Matières | Géométrie | Nuance | Vitesse de coupe | Diamètre d'outil | 1,188 | 1,469 | 1,813 | 2,250 | |||
| Inter | Exter | Mini | Départ | Maxi | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0,0053 | 0,0063 | 0,0071 | 0,0075 |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0075 |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0,0051 | 0,0059 | 0,0063 | 0,0067 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0,0047 | 0,0055 | 0,0063 | 0,0063 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0,0055 | 0,0063 | 0,0071 | 0,0079 |
| Recommended Feed Rate per Revolution | |||||||||||
| Groupe Matières | Géométrie | Nuance | Vitesse de coupe | Diamètre d'outil | .473 | .563 | .750 | .969 | |||
| Inter | Exter | Mini | Départ | Maxi | |||||||
| P0 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0031 | 0.0031–0.0043 | 0.0039–0.0051 | 0.0043–0.0055 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0041 | 0.0034–0.0044 | |
| P1 | –V38 | WU40PH | WU25CH | 360 | 540 | 780 | IPR | 0.0024–0.0039 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 625 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P2 | –V34 | WU40PH | WU25CH | 360 | 570 | 840 | IPR | 0.0024–0.0039 | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0067 |
| – DU | WU20PH | WU20PH | 290 | 450 | 675 | IPR | – | – | 0.0031–0.0050 | 0.0034–0.0054 | |
| P3 | –V34 | WU40PH | WPK10CH | 360 | 600 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 480 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P4 | –V34 | WU40PH | WPK10CH | 360 | 570 | 930 | IPR | 0.0031–0.0059 | 0.0039–0.0063 | 0.0043–0.0071 | 0.0047–0.0079 |
| – DU | WU20PH | WU20PH | 290 | 450 | 745 | IPR | – | – | 0.0034–0.0067 | 0.0037–0.0063 | |
| P5 | –V36 | WU40PH | WU25CH | 360 | 540 | 750 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| – DU | WU20PH | WU20PH | 290 | 430 | 600 | IPR | – | – | 0.0031–0.0047 | 0.0034–0.0050 | |
| P6 | -V36 | WU40PH | WU25CH | 360 | 480 | 630 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| -V36 | WU40PH | WU25CH | 290 | 385 | 500 | IPR | - | - | 0.0031-0.0047 | 0.0034-0.0050 | |
| M1 | -V38 | WU40PH | WU40PH | 360 | 480 | 720 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 290 | 385 | 575 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| M2 | –V38 | WU40PH | WU40PH | 330 | 420 | 630 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| – DU | WU20PH | WU20PH | 265 | 340 | 500 | IPR | – | – | 0.0025–0.0047 | 0.0031–0.0050 | |
| M3 | -V36 | WU40PH | WU40PH | 300 | 360 | 600 | IPR | 0.0024–0.0047 | 0.0028–0.0051 | 0.0031–0.0059 | 0.0039–0.0063 |
| - DU | WU20PH | WU20PH | 240 | 290 | 480 | IPR | - | - | 0.0025-0.0047 | 0.0031-0.0050 | |
| K1 | -V34 | WU25CH | WPK10CH | 360 | 600 | 840 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 290 | 480 | 675 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| K2 | –V34 | WU40PH | WPK10CH | 300 | 540 | 780 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| – DU | WU20PH | WU20PH | 240 | 430 | 625 | IPR | – | – | 0.0031–0.0057 | 0.0038–0.0075 | |
| K3 | -V34 | WU40PH | WPK10CH | 300 | 510 | 720 | IPR | 0.0031–0.0055 | 0.0031–0.0063 | 0.0039–0.0071 | 0.0047–0.0094 |
| - DU | WU20PH | WU20PH | 240 | 400 | 575 | IPR | - | - | 0.0031-0.0057 | 0.0038-0.0075 | |
| N1 | -V36 | WN10PH | WN10PH | 750 | 1050 | 1500 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N2 | –V36 | WN10PH | WN10PH | 450 | 900 | 1350 | IPR | 0.0024–0.0039 | 0.0031–0.0055 | 0.0039–0.0059 | 0.0043–0.0063 |
| N3 | -V36 | WN10PH | WN10PH | 240 | 360 | 450 | IPR | 0.0024–0.0039 | 0.0028–0.0043 | 0.0031–0.0047 | 0.0039–0.0055 |
| S3 | -V38 | WU40PH | WU40PH | 60 | 90 | 135 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| - DU | WU20PH | WU20PH | 50 | 70 | 100 | IPR | - | - | 0.0031-0.0047 | 0.0038-0.006 | |
| S4 | –V38 | WU40PH | WU40PH | 105 | 120 | 195 | IPR | 0.0031–0.0047 | 0.0031–0.0051 | 0.0039–0.0059 | 0.0047–0.0075 |
| – DU | WU20PH | WU20PH | 85 | 95 | 150 | IPR | – | – | 0.0031–0.0047 | 0.0038–0.006 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?