Grooving and Cut-Off
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (1351)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1351)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1351)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1351)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1351)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1351)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1351)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1351)
- M Stainless Steel (1349)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1349)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1349)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1349)
- K Cast Iron (1347)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1347)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1347)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1347)
- N Non-Ferrous Materials (1332)
- N1Wrought Aluminum (1332)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1332)
- N3High-Silicon Aluminum Alloys Si >12.2%(1331)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (129)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1331)
- N6Carbon, Graphite Composites, CFRP (1331)
- N7MMC's (128)
- S High-Temp Alloys (1340)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1340)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1340)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1340)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1340)
- H Hardened Materials (586)
- H1Hardened Materials 44-48 HRC(586)
- H2Hardened Materials 48-55 HRC(586)
- H3Hardened Materials 56-60 HRC(99)
- H4Hardened Materials >60 HRC(99)
Select All Star
- CN (132)
- DE (273)
- GB (19)
- IN (78)
- SG (64)
- US (398)
Applications
Applications
Back Boring (54)
Boring (12)
Chamfer Turning (36)
Cut-Off (487)
Deep Grooving (55)
Face Grooving (726)
Facing (124)
Grooving (968)
ID Facing (86)
ID Grooving (619)
ID Thread Turning (44)
Multiple Direction Cutting (20)
OD Thread Turning (67)
Plunge Turning (347)
Profiling (239)
Turning (151)
Type of Thread
Type of Thread
- 60 (107)
- ACME (66)
- API RD (45)
- BSW (23)
- BUTTRESS (22)
- STUB ACME (45)
- UN (93)
- UNJ (23)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1211)
- Lightly Interrupted Cut (1236)
- Smooth Cut (1178)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (639)
to
Connection Style
Connection Style
- Boring Bar Shank (106)
- Cutoff Support Blade A1-A3 (15)
- Toolholder (415)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (576)
- 2.0 (822)
- 3.0 (2)
to
Over All Length [L]
Over All Length [L]
- 1.8798 in(5)
- 1.8799 in(5)
- 1.9535 in(3)
- 1.9536 in(1)
- 1.978 in(1)
- 1.998 in(2)
- 2.0372 in(3)
- 2.0374 in(1)
- 2.136 in(2)
- 2.175 in(2)
- 2.214 in(14)
- 2.254 in(2)
- 2.2735 in(4)
- 2.3 in(3)
- 2.3002 in(1)
- 2.3472 in(3)
- 2.3473 in(1)
- 2.362 in(2)
- 2.372 in(10)
- 2.411 in(2)
- 2.4309 in(1)
- 2.4311 in(1)
- 2.5 in(1)
- 2.55 in(8)
- 2.5835 in(2)
- 2.6672 in(3)
- 2.6673 in(1)
- 3.15 in(1)
- 3.3858 in(1)
- 3.5 in(1)
- 3.5532 in(1)
- 3.5533 in(2)
- 3.937 in(15)
- 4.0 in(2)
- 4.252 in(1)
- 4.27 in(2)
- 4.3 in(2)
- 4.3307 in(3)
- 4.3404 in(1)
- 4.3406 in(2)
- 4.3407 in(2)
- 4.5 in(58)
- 4.77 in(2)
- 4.921 in(45)
- 4.9213 in(25)
- 4.961 in(3)
- 5.0 in(42)
- 5.0197 in(10)
- 5.05 in(4)
- 5.39 in(2)
- 5.4626 in(2)
- 5.5 in(7)
- 5.5079 in(1)
- 5.512 in(2)
- 5.64 in(3)
- 5.77 in(1)
- 5.905 in(1)
- 5.9055 in(68)
- 5.906 in(34)
- 5.915 in(2)
- 5.9152 in(1)
- 5.9153 in(2)
- 5.9154 in(3)
- 5.9155 in(2)
- 5.9606 in(6)
- 5.961 in(4)
- 5.975 in(3)
- 6.0 in(111)
- 6.0039 in(8)
- 6.25 in(2)
- 6.6929 in(24)
- 6.693 in(2)
- 6.7028 in(2)
- 7.0 in(14)
- 7.0201 in(2)
- 7.0202 in(1)
- 7.0866 in(6)
- 7.874 in(23)
- 8.0 in(13)
- 9.8425 in(2)
- 9.843 in(8)
- 10.0 in(12)
- 10.236 in(1)
- 11.811 in(6)
- 11.817 in(1)
- 12.0 in(9)
- 13.7795 in(1)
- 14.0 in(7)
- 16.0 in(4)
to
Over All Length [L]
Over All Length [L]
- 47.746 mm(5)
- 47.75 mm(5)
- 49.62 mm(4)
- 50.25 mm(1)
- 50.75 mm(2)
- 51.746 mm(3)
- 51.75 mm(1)
- 54.25 mm(2)
- 55.25 mm(2)
- 56.25 mm(14)
- 57.25 mm(2)
- 57.746 mm(3)
- 57.75 mm(1)
- 58.42 mm(3)
- 58.425 mm(1)
- 59.62 mm(4)
- 60.0 mm(2)
- 60.25 mm(10)
- 61.25 mm(2)
- 61.746 mm(1)
- 61.75 mm(1)
- 63.5 mm(1)
- 64.77 mm(8)
- 65.62 mm(2)
- 67.746 mm(3)
- 67.75 mm(1)
- 80.0 mm(1)
- 86.0 mm(1)
- 88.9 mm(1)
- 90.25 mm(3)
- 100.0 mm(15)
- 101.6 mm(2)
- 108.0 mm(1)
- 108.46 mm(2)
- 109.22 mm(2)
- 110.0 mm(3)
- 110.25 mm(4)
- 110.251 mm(1)
- 114.3 mm(58)
- 121.16 mm(2)
- 125.0 mm(70)
- 126.0 mm(3)
- 127.0 mm(42)
- 127.5 mm(10)
- 128.27 mm(4)
- 136.91 mm(2)
- 138.75 mm(2)
- 139.7 mm(2)
- 139.9 mm(6)
- 140.0 mm(2)
- 143.26 mm(3)
- 146.56 mm(1)
- 150.0 mm(103)
- 150.25 mm(10)
- 151.4 mm(6)
- 151.41 mm(4)
- 151.76 mm(3)
- 152.4 mm(111)
- 152.5 mm(8)
- 158.75 mm(2)
- 170.0 mm(26)
- 170.25 mm(2)
- 177.8 mm(14)
- 178.31 mm(2)
- 178.313 mm(1)
- 180.0 mm(6)
- 200.0 mm(23)
- 203.2 mm(13)
- 250.0 mm(10)
- 254.0 mm(12)
- 260.0 mm(1)
- 300.0 mm(6)
- 300.15 mm(1)
- 304.8 mm(9)
- 350.0 mm(1)
- 355.6 mm(7)
- 406.4 mm(4)
to
Corner Radius
Corner Radius
- 0.003 in(171)
- 0.004 in(235)
- 0.005 in(23)
- 0.006 in(146)
- 0.007 in(205)
- 0.008 in(514)
- 0.009 in(80)
- 0.01 in(195)
- 0.012 in(298)
- 0.013 in(157)
- 0.014 in(45)
- 0.015 in(19)
- 0.016 in(261)
- 0.02 in(43)
- 0.023 in(132)
- 0.024 in(209)
- 0.03 in(222)
- 0.031 in(261)
- 0.039 in(159)
- 0.047 in(136)
- 0.049 in(64)
- 0.059 in(233)
- 0.06 in(58)
- 0.062 in(49)
- 0.063 in(143)
- 0.069 in(88)
- 0.078 in(48)
- 0.079 in(141)
- 0.08 in(34)
- 0.089 in(47)
- 0.094 in(145)
- 0.098 in(83)
- 0.099 in(38)
- 0.118 in(64)
- 0.119 in(33)
- 0.125 in(88)
- 0.156 in(37)
- 0.157 in(37)
- 0.158 in(15)
to
Corner Radius
Corner Radius
- 0.075 mm(171)
- 0.1 mm(235)
- 0.125 mm(23)
- 0.15 mm(146)
- 0.175 mm(205)
- 0.2 mm(514)
- 0.225 mm(80)
- 0.25 mm(195)
- 0.3 mm(298)
- 0.325 mm(157)
- 0.35 mm(45)
- 0.375 mm(19)
- 0.4 mm(261)
- 0.5 mm(43)
- 0.575 mm(132)
- 0.6 mm(209)
- 0.75 mm(222)
- 0.775 mm(149)
- 0.8 mm(160)
- 1.0 mm(159)
- 1.2 mm(136)
- 1.25 mm(64)
- 1.5 mm(233)
- 1.525 mm(58)
- 1.575 mm(49)
- 1.6 mm(143)
- 1.75 mm(88)
- 1.975 mm(48)
- 2.0 mm(141)
- 2.025 mm(34)
- 2.25 mm(47)
- 2.375 mm(49)
- 2.4 mm(96)
- 2.5 mm(83)
- 2.525 mm(38)
- 3.0 mm(64)
- 3.025 mm(33)
- 3.175 mm(88)
- 3.95 mm(37)
- 4.0 mm(37)
- 4.025 mm(15)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(831)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(831)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG55 (1)
- CW2015 (1)
- THM (103)
- THM X (1)
- THM-F (1)
- THM-X (1)
- TN2000 (1)
- TN4000 (1)
- TN6010 (231)
- TN6025 (337)
- TN6030 (2)
- TTM08 (2)
- TTM09 (5)
- TTMS (1)
- TTR (2)
- TTR-X (2)
- TTS (2)
- WDN25U (1)
- WK20CT (2)
- WM35CT (1)
- WP10CT (216)
- WP15CT (2)
- WP25CT (214)
- WP35CT (2)
- WS25PT (66)
- WU10HT (155)
- WU10PT (512)
- WU25PT (784)
- WU35CT (13)
- WU35PT (141)
Hand Of Tool
Hand Of Tool
- L (237)
- N (18)
- R (281)
Wiper Insert
Wiper Insert
- N (1280)
- Y (155)
F Dimension
F Dimension
- 0.0 mm(2)
- 1.275 mm(2)
- 1.45 mm(2)
- 1.825 mm(3)
- 2.7 mm(2)
- 3.6 mm(1)
- 3.7 mm(1)
- 3.7005 mm(1)
- 4.7 mm(1)
- 5.7 mm(1)
- 6.553 mm(2)
- 7.0 mm(2)
- 7.5 mm(2)
- 8.525 mm(2)
- 9.0 mm(2)
- 9.525 mm(5)
- 9.53 mm(2)
- 10.0 mm(6)
- 10.312 mm(1)
- 11.0 mm(8)
- 11.062 mm(4)
- 11.1 mm(2)
- 11.94 mm(2)
- 12.0 mm(12)
- 12.7 mm(17)
- 13.0 mm(6)
- 13.945 mm(2)
- 13.969 mm(2)
- 14.27 mm(1)
- 14.275 mm(2)
- 15.86 mm(4)
- 15.87 mm(1)
- 15.875 mm(7)
- 15.88 mm(5)
- 15.9 mm(1)
- 15.94 mm(2)
- 15.97 mm(2)
- 15.973 mm(2)
- 16.0 mm(20)
- 16.09 mm(2)
- 16.256 mm(2)
- 17.0 mm(10)
- 17.304 mm(6)
- 17.475 mm(2)
- 17.48 mm(2)
- 19.04 mm(1)
- 19.048 mm(1)
- 19.05 mm(21)
- 19.08 mm(4)
- 19.085 mm(2)
- 19.13 mm(11)
- 19.135 mm(3)
- 19.152 mm(2)
- 19.431 mm(1)
- 19.94 mm(2)
- 20.0 mm(23)
- 20.06 mm(6)
- 20.11 mm(14)
- 22.0 mm(2)
- 22.225 mm(2)
- 24.94 mm(1)
- 25.0 mm(45)
- 25.06 mm(6)
- 25.11 mm(18)
- 25.16 mm(2)
- 25.21 mm(4)
- 25.336 mm(2)
- 25.4 mm(27)
- 25.425 mm(1)
- 25.43 mm(4)
- 25.435 mm(2)
- 25.451 mm(1)
- 25.48 mm(15)
- 25.485 mm(3)
- 25.5 mm(2)
- 25.502 mm(3)
- 25.58 mm(4)
- 25.71 mm(2)
- 26.0 mm(4)
- 26.01 mm(4)
- 27.0 mm(3)
- 29.0 mm(8)
- 29.01 mm(7)
- 31.74 mm(2)
- 31.75 mm(18)
- 31.83 mm(8)
- 31.93 mm(4)
- 32.0 mm(16)
- 32.06 mm(4)
- 32.08 mm(8)
- 32.18 mm(4)
- 32.3 mm(3)
- 32.306 mm(4)
- 32.41 mm(2)
- 32.537 mm(1)
- 32.656 mm(2)
- 33.0 mm(3)
- 34.925 mm(2)
- 35.0 mm(1)
- 38.1 mm(4)
- 38.28 mm(2)
- 38.41 mm(2)
- 38.76 mm(2)
- 40.0 mm(2)
- 40.18 mm(2)
- 40.306 mm(2)
- 40.656 mm(2)
to
F Dimension
F Dimension
- 0.0 in(2)
- 0.0502 in(2)
- 0.0571 in(2)
- 0.0719 in(3)
- 0.1063 in(2)
- 0.1417 in(1)
- 0.1455 in(1)
- 0.1457 in(1)
- 0.1851 in(1)
- 0.2244 in(1)
- 0.258 in(2)
- 0.276 in(2)
- 0.2953 in(2)
- 0.3356 in(2)
- 0.3543 in(2)
- 0.375 in(7)
- 0.3937 in(6)
- 0.406 in(1)
- 0.433 in(2)
- 0.4331 in(6)
- 0.4355 in(4)
- 0.437 in(2)
- 0.47 in(2)
- 0.472 in(3)
- 0.4724 in(9)
- 0.5 in(17)
- 0.5118 in(6)
- 0.549 in(2)
- 0.55 in(2)
- 0.562 in(3)
- 0.624 in(4)
- 0.625 in(13)
- 0.626 in(1)
- 0.628 in(2)
- 0.6289 in(2)
- 0.629 in(2)
- 0.6299 in(9)
- 0.63 in(11)
- 0.6335 in(2)
- 0.64 in(2)
- 0.669 in(4)
- 0.6693 in(6)
- 0.6813 in(6)
- 0.688 in(4)
- 0.7499 in(1)
- 0.75 in(22)
- 0.751 in(4)
- 0.7514 in(2)
- 0.753 in(8)
- 0.7531 in(3)
- 0.7533 in(3)
- 0.754 in(2)
- 0.765 in(1)
- 0.785 in(2)
- 0.787 in(10)
- 0.7874 in(8)
- 0.788 in(5)
- 0.7898 in(2)
- 0.79 in(4)
- 0.7917 in(14)
- 0.8661 in(2)
- 0.875 in(2)
- 0.982 in(1)
- 0.984 in(25)
- 0.9843 in(20)
- 0.9866 in(2)
- 0.987 in(4)
- 0.9886 in(17)
- 0.989 in(1)
- 0.991 in(2)
- 0.9925 in(4)
- 0.9975 in(2)
- 1.0 in(27)
- 1.001 in(5)
- 1.0014 in(2)
- 1.002 in(1)
- 1.003 in(12)
- 1.0031 in(3)
- 1.0033 in(3)
- 1.0039 in(2)
- 1.004 in(3)
- 1.007 in(4)
- 1.012 in(2)
- 1.024 in(8)
- 1.063 in(3)
- 1.142 in(15)
- 1.25 in(20)
- 1.253 in(8)
- 1.257 in(4)
- 1.2598 in(7)
- 1.26 in(9)
- 1.262 in(4)
- 1.263 in(8)
- 1.2669 in(4)
- 1.2717 in(3)
- 1.2719 in(4)
- 1.276 in(2)
- 1.281 in(1)
- 1.2857 in(2)
- 1.2992 in(3)
- 1.375 in(2)
- 1.378 in(1)
- 1.5 in(4)
- 1.507 in(2)
- 1.512 in(2)
- 1.526 in(2)
- 1.5748 in(2)
- 1.5819 in(2)
- 1.5869 in(2)
- 1.6006 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(55)
- 11.176 mm(2)
- 11.5 mm(2)
- 15.875 mm(2)
- 16.0 mm(2)
- 18.5 mm(2)
- 18.542 mm(2)
- 20.0 mm(8)
- 20.32 mm(1)
- 22.0 mm(2)
- 25.0 mm(8)
- 25.4 mm(2)
- 26.0 mm(2)
- 28.575 mm(1)
- 28.58 mm(1)
- 30.0 mm(1)
- 31.75 mm(6)
- 32.0 mm(7)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(2)
- 38.0 mm(6)
- 40.39 mm(4)
- 41.0 mm(4)
- 41.3 mm(29)
- 44.0 mm(2)
- 44.45 mm(2)
- 46.99 mm(7)
- 47.0 mm(8)
- 47.6 mm(27)
- 50.8 mm(2)
- 52.0 mm(10)
- 54.0 mm(7)
- 54.1 mm(3)
- 55.88 mm(1)
- 56.625 mm(3)
- 57.15 mm(15)
- 57.2 mm(12)
- 60.325 mm(2)
- 63.5 mm(7)
- 69.85 mm(4)
- 70.0 mm(14)
- 76.2 mm(1)
- 88.9 mm(139)
- 100.0 mm(17)
- 101.6 mm(2)
- 139.7 mm(165)
- 174.6 mm(57)
- 209.6 mm(43)
- 222.3 mm(26)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(55)
- 0.44 in(2)
- 0.453 in(2)
- 0.625 in(2)
- 0.6299 in(2)
- 0.728 in(2)
- 0.73 in(2)
- 0.7874 in(8)
- 0.8 in(1)
- 0.8661 in(2)
- 0.9843 in(8)
- 1.0 in(2)
- 1.0236 in(2)
- 1.125 in(2)
- 1.181 in(1)
- 1.25 in(6)
- 1.2598 in(7)
- 1.339 in(4)
- 1.375 in(4)
- 1.496 in(4)
- 1.4961 in(2)
- 1.59 in(4)
- 1.614 in(4)
- 1.626 in(29)
- 1.7323 in(2)
- 1.75 in(2)
- 1.85 in(15)
- 1.874 in(27)
- 2.0 in(2)
- 2.047 in(6)
- 2.0472 in(4)
- 2.126 in(7)
- 2.13 in(3)
- 2.2 in(1)
- 2.229 in(3)
- 2.25 in(15)
- 2.252 in(12)
- 2.375 in(2)
- 2.5 in(7)
- 2.75 in(4)
- 2.7559 in(9)
- 2.756 in(5)
- 3.0 in(1)
- 3.5 in(139)
- 3.937 in(17)
- 4.0 in(2)
- 5.5 in(165)
- 6.874 in(57)
- 8.252 in(43)
- 8.752 in(26)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.787 in(4)
- 0.7874 in(15)
- 1.0236 in(15)
- 1.024 in(2)
- 1.062 in(2)
- 1.125 in(2)
- 1.25 in(2)
- 1.26 in(27)
- 2.047 in(5)
- 2.0472 in(3)
- 2.7559 in(4)
- 2.756 in(6)
- 3.937 in(13)
- 4.0 in(2)
- 8.0 in(2)
- 8.0709 in(9)
- 8.071 in(8)
- 16.0 in(12)
- 393.661 in(471)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(19)
- 25.999 mm(7)
- 26.0 mm(10)
- 26.975 mm(2)
- 28.575 mm(2)
- 31.75 mm(2)
- 32.0 mm(27)
- 52.0 mm(8)
- 70.0 mm(10)
- 100.0 mm(13)
- 101.6 mm(2)
- 203.2 mm(2)
- 205.0 mm(17)
- 406.4 mm(12)
- 9999.0 mm(471)
to
Cutting Direction
Cutting Direction
- E (434)
- S (102)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (52)
- NEUTRAL (ZERO) (106)
- POSITIVE-ZERO (43)
Maximum Bore Depth
Maximum Bore Depth
- 0.9449 in(2)
- 1.0 in(9)
- 1.231 in(1)
- 1.2323 in(1)
- 1.25 in(4)
- 1.2598 in(2)
- 1.29 in(1)
- 1.5 in(5)
- 1.5748 in(2)
- 1.5864 in(2)
- 1.5947 in(2)
- 1.88 in(2)
- 1.9685 in(2)
- 1.97 in(8)
- 1.9793 in(2)
- 1.9803 in(2)
- 2.0 in(19)
- 2.5 in(5)
- 2.5196 in(1)
- 2.52 in(14)
- 2.54 in(2)
- 3.0 in(2)
- 3.148 in(1)
- 3.1496 in(1)
- 3.15 in(3)
- 3.31 in(2)
- 3.32 in(2)
- 3.92 in(2)
- 3.936 in(2)
- 4.0 in(6)
- 5.0 in(3)
- 5.0392 in(2)
- 6.0 in(2)
- 6.2992 in(3)
- 7.0 in(2)
- 7.874 in(1)
- 8.0 in(4)
to
Maximum Bore Depth
Maximum Bore Depth
- 24.0 mm(2)
- 25.4 mm(9)
- 31.26 mm(1)
- 31.3 mm(1)
- 31.75 mm(4)
- 32.0 mm(2)
- 32.766 mm(1)
- 38.1 mm(5)
- 40.0 mm(2)
- 40.295 mm(2)
- 40.506 mm(2)
- 48.0 mm(2)
- 50.0 mm(10)
- 50.275 mm(2)
- 50.3 mm(2)
- 50.8 mm(19)
- 63.5 mm(5)
- 64.0 mm(15)
- 64.4 mm(2)
- 76.2 mm(2)
- 80.0 mm(5)
- 84.0 mm(2)
- 84.4 mm(2)
- 100.0 mm(4)
- 101.6 mm(6)
- 127.0 mm(3)
- 128.0 mm(2)
- 152.4 mm(2)
- 160.0 mm(3)
- 177.8 mm(2)
- 200.0 mm(1)
- 203.2 mm(4)
to
Boring Bar Material
Boring Bar Material
- S (106)
Front-End
Clamp Style
Clamp Style
- C (17)
- M (41)
- N (111)
- S (32)
- W (3)
- Y (386)
Cutting Width
Cutting Width
- 0.0197 in(42)
- 0.031 in(46)
- 0.0315 in(43)
- 0.0394 in(93)
- 0.041 in(24)
- 0.047 in(101)
- 0.0472 in(90)
- 0.055 in(10)
- 0.0551 in(43)
- 0.058 in(41)
- 0.059 in(25)
- 0.0591 in(97)
- 0.062 in(128)
- 0.0669 in(42)
- 0.0689 in(88)
- 0.072 in(47)
- 0.0768 in(43)
- 0.078 in(49)
- 0.0787 in(177)
- 0.0788 in(68)
- 0.079 in(125)
- 0.0837 in(69)
- 0.084 in(42)
- 0.0866 in(88)
- 0.088 in(25)
- 0.0886 in(65)
- 0.094 in(227)
- 0.0984 in(167)
- 0.0988 in(68)
- 0.099 in(68)
- 0.1083 in(90)
- 0.118 in(153)
- 0.1181 in(185)
- 0.1182 in(68)
- 0.123 in(140)
- 0.125 in(304)
- 0.126 in(47)
- 0.1278 in(41)
- 0.128 in(23)
- 0.13 in(70)
- 0.1378 in(102)
- 0.147 in(25)
- 0.151 in(41)
- 0.156 in(88)
- 0.157 in(101)
- 0.1574 in(59)
- 0.1575 in(126)
- 0.158 in(83)
- 0.1614 in(2)
- 0.162 in(49)
- 0.1624 in(51)
- 0.163 in(46)
- 0.1673 in(24)
- 0.1771 in(67)
- 0.1772 in(57)
- 0.187 in(50)
- 0.1872 in(49)
- 0.1875 in(57)
- 0.188 in(104)
- 0.189 in(81)
- 0.192 in(76)
- 0.1921 in(49)
- 0.195 in(24)
- 0.196 in(47)
- 0.1968 in(28)
- 0.1969 in(48)
- 0.197 in(73)
- 0.2018 in(29)
- 0.202 in(50)
- 0.2165 in(10)
- 0.236 in(72)
- 0.2362 in(45)
- 0.241 in(77)
- 0.2411 in(34)
- 0.249 in(32)
- 0.25 in(104)
- 0.255 in(35)
- 0.281 in(32)
- 0.312 in(42)
- 0.315 in(44)
- 0.317 in(24)
- 0.3199 in(26)
- 0.32 in(24)
- 0.3213 in(2)
- 0.375 in(9)
- 0.38 in(10)
- 0.3986 in(10)
- 0.4 in(3)
- 0.48 in(6)
- 0.4803 in(3)
- 0.5594 in(1)
- 0.6382 in(4)
to
Cutting Width
Cutting Width
- 0.5 mm(42)
- 0.787 mm(46)
- 0.8 mm(43)
- 1.0 mm(93)
- 1.041 mm(24)
- 1.19 mm(41)
- 1.194 mm(82)
- 1.2 mm(90)
- 1.4 mm(51)
- 1.404 mm(4)
- 1.473 mm(41)
- 1.5 mm(122)
- 1.57 mm(70)
- 1.575 mm(119)
- 1.7 mm(42)
- 1.75 mm(88)
- 1.829 mm(47)
- 1.95 mm(43)
- 1.981 mm(49)
- 1.99 mm(40)
- 2.0 mm(234)
- 2.125 mm(69)
- 2.13 mm(42)
- 2.2 mm(88)
- 2.236 mm(25)
- 2.25 mm(65)
- 2.38 mm(21)
- 2.387 mm(96)
- 2.388 mm(189)
- 2.39 mm(50)
- 2.5 mm(167)
- 2.51 mm(68)
- 2.511 mm(68)
- 2.75 mm(90)
- 3.0 mm(274)
- 3.125 mm(70)
- 3.13 mm(70)
- 3.17 mm(112)
- 3.175 mm(227)
- 3.176 mm(69)
- 3.18 mm(71)
- 3.2 mm(47)
- 3.245 mm(41)
- 3.25 mm(23)
- 3.301 mm(68)
- 3.302 mm(68)
- 3.5 mm(102)
- 3.73 mm(25)
- 3.84 mm(41)
- 3.95 mm(33)
- 3.96 mm(59)
- 3.962 mm(48)
- 3.974 mm(24)
- 4.0 mm(188)
- 4.1 mm(2)
- 4.125 mm(52)
- 4.13 mm(46)
- 4.25 mm(24)
- 4.5 mm(70)
- 4.75 mm(50)
- 4.754 mm(49)
- 4.76 mm(37)
- 4.761 mm(49)
- 4.762 mm(52)
- 4.763 mm(52)
- 4.77 mm(41)
- 4.775 mm(48)
- 4.78 mm(37)
- 4.788 mm(11)
- 4.8 mm(49)
- 4.801 mm(77)
- 4.877 mm(50)
- 4.878 mm(50)
- 4.88 mm(25)
- 4.953 mm(24)
- 4.978 mm(47)
- 5.0 mm(99)
- 5.125 mm(29)
- 5.13 mm(50)
- 5.5 mm(10)
- 6.0 mm(86)
- 6.12 mm(33)
- 6.125 mm(35)
- 6.13 mm(42)
- 6.32 mm(32)
- 6.34 mm(32)
- 6.35 mm(99)
- 6.36 mm(42)
- 6.477 mm(33)
- 6.478 mm(33)
- 7.125 mm(32)
- 7.92 mm(39)
- 7.925 mm(23)
- 7.94 mm(14)
- 8.0 mm(44)
- 8.051 mm(23)
- 8.052 mm(23)
- 8.125 mm(26)
- 8.13 mm(24)
- 8.15 mm(2)
- 9.525 mm(9)
- 9.651 mm(10)
- 10.125 mm(10)
- 10.15 mm(3)
- 12.2 mm(6)
- 14.2 mm(1)
- 16.2 mm(4)
to
Insert Shape
Insert Shape
- PRISMATIC (911)
- T-TRIANGLE 60 (2)
- TN-TOP NOTCH (476)
Cartridge Size
Cartridge Size
- 50 (24)
- 65 (10)
Insert Size
Insert Size
- 1 (24)
- 10 (9)
- 12 (3)
- 16 (2)
- 2 (117)
- 2B (18)
- 3 (136)
- 4 (78)
- 5 (45)
- 6 (45)
- 8 (29)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.067 in(1)
- 0.138 in(14)
- 0.1382 in(9)
- 0.1969 in(4)
- 0.2098 in(8)
- 0.21 in(20)
- 0.225 in(1)
- 0.2756 in(16)
- 0.294 in(8)
- 0.2941 in(5)
- 0.315 in(12)
- 0.334 in(2)
- 0.3937 in(35)
- 0.394 in(4)
- 0.42 in(3)
- 0.433 in(9)
- 0.4331 in(2)
- 0.44 in(8)
- 0.4724 in(18)
- 0.4921 in(1)
- 0.5 in(3)
- 0.5118 in(17)
- 0.512 in(4)
- 0.531 in(2)
- 0.551 in(12)
- 0.5512 in(2)
- 0.56 in(9)
- 0.5625 in(2)
- 0.5906 in(1)
- 0.6102 in(2)
- 0.625 in(13)
- 0.6252 in(1)
- 0.6299 in(33)
- 0.63 in(55)
- 0.65 in(18)
- 0.669 in(1)
- 0.7283 in(2)
- 0.748 in(24)
- 0.75 in(22)
- 0.7874 in(2)
- 0.7875 in(1)
- 0.866 in(35)
- 0.8661 in(8)
- 0.875 in(8)
- 0.944 in(5)
- 0.984 in(9)
- 0.9843 in(4)
- 1.0 in(19)
- 1.0236 in(23)
- 1.024 in(23)
- 1.1811 in(2)
- 1.1812 in(1)
- 1.2598 in(18)
- 1.26 in(10)
- 1.3386 in(1)
- 1.5748 in(8)
- 1.575 in(6)
- 1.5752 in(1)
- 1.9671 in(1)
- 1.9686 in(1)
- 1.969 in(1)
- 2.3622 in(3)
- 4.7244 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 1.69 mm(1)
- 3.505 mm(12)
- 3.51 mm(11)
- 5.0 mm(4)
- 5.33 mm(8)
- 5.334 mm(20)
- 5.715 mm(1)
- 7.0 mm(16)
- 7.468 mm(8)
- 7.47 mm(5)
- 8.0 mm(12)
- 8.484 mm(2)
- 10.0 mm(39)
- 10.668 mm(2)
- 10.67 mm(1)
- 11.0 mm(11)
- 11.176 mm(4)
- 11.18 mm(4)
- 12.0 mm(18)
- 12.5 mm(1)
- 12.7 mm(3)
- 12.9995 mm(7)
- 13.0 mm(14)
- 13.4875 mm(2)
- 14.0 mm(14)
- 14.22 mm(3)
- 14.224 mm(6)
- 14.2875 mm(2)
- 15.0 mm(1)
- 15.5 mm(2)
- 15.875 mm(3)
- 15.88 mm(10)
- 15.883 mm(1)
- 16.0 mm(88)
- 16.5 mm(10)
- 16.51 mm(8)
- 17.0 mm(1)
- 18.5 mm(2)
- 19.0 mm(24)
- 19.05 mm(21)
- 19.06 mm(1)
- 20.0 mm(3)
- 22.0 mm(43)
- 22.22 mm(4)
- 22.225 mm(4)
- 23.97 mm(5)
- 25.0 mm(13)
- 25.4 mm(19)
- 26.0 mm(46)
- 30.0 mm(3)
- 32.0 mm(28)
- 34.0 mm(1)
- 40.0 mm(15)
- 50.0 mm(3)
- 60.0 mm(3)
- 120.0 mm(1)
to
Gage Length
Gage Length
- 69.7800 in(2)
- 82.4800 in(2)
- 95.3600 in(3)
- 98.2200 in(2)
- 107.8800 in(1)
- 108.0000 in(1)
- 109.2200 in(2)
- 126.0000 in(3)
- 128.2700 in(4)
- 138.1500 in(2)
- 138.7500 in(2)
- 139.2500 in(4)
- 139.9000 in(6)
- 140.4000 in(8)
- 140.4100 in(4)
- 140.5500 in(2)
- 150.0000 in(2)
- 151.4600 in(3)
- 152.4000 in(4)
- 158.1500 in(2)
- 158.7500 in(2)
- 159.2500 in(2)
- 165.9500 in(2)
- 170.0000 in(2)
- 171.4500 in(3)
- 177.8000 in(2)
Gage Length
Gage Length
- 69.7800 mm(2)
- 82.4800 mm(2)
- 95.3600 mm(3)
- 98.2200 mm(2)
- 107.8800 mm(1)
- 108.0000 mm(1)
- 109.2200 mm(2)
- 126.0000 mm(3)
- 128.2700 mm(4)
- 138.1500 mm(2)
- 138.7500 mm(2)
- 139.2500 mm(4)
- 139.9000 mm(6)
- 140.4000 mm(8)
- 140.4100 mm(4)
- 140.5500 mm(2)
- 150.0000 mm(2)
- 151.4600 mm(3)
- 152.4000 mm(4)
- 158.1500 mm(2)
- 158.7500 mm(2)
- 159.2500 mm(2)
- 165.9500 mm(2)
- 170.0000 mm(2)
- 171.4500 mm(3)
- 177.8000 mm(2)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.64 mm(3)
- 0.76 mm(3)
- 0.762 mm(27)
- 1.015 mm(2)
- 1.016 mm(49)
- 1.02 mm(4)
- 1.09 mm(9)
- 1.092 mm(33)
- 1.335 mm(3)
- 1.905 mm(2)
- 1.97 mm(2)
- 1.981 mm(2)
- 2.54 mm(3)
- 2.75 mm(2)
- 2.92 mm(9)
- 2.921 mm(23)
- 3.81 mm(10)
- 3.84 mm(2)
- 3.86 mm(1)
to
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.025 in(3)
- 0.03 in(30)
- 0.04 in(55)
- 0.043 in(42)
- 0.0526 in(3)
- 0.075 in(2)
- 0.078 in(4)
- 0.1 in(3)
- 0.108 in(2)
- 0.115 in(32)
- 0.15 in(10)
- 0.151 in(2)
- 0.152 in(1)
to
Insert Geometry
Shape
Shape
- PRISMATIC (385)
- TN-TOP NOTCH (365)
Insert Seat Size
Insert Seat Size
- 1 (8)
- 10 (7)
- 12 (3)
- 14 (1)
- 16 (1)
- 1B (8)
- 2 (164)
- 2B (10)
- 3 (289)
- 4 (123)
- 5 (46)
- 6 (53)
- 8 (37)
Cutting Tool Material
Cutting Tool Material
- C A (1)
- D P (1)
- H W (1376)
Back-End
Connection Type
Connection Type
- BORING BAR (106)
- CUTOFF BLADE (15)
- SQUARE SHANK (409)
Back-End Diameter
Back-End Diameter
- 9.525 mm(1)
- 10.0 mm(1)
- 12.0 mm(5)
- 12.7 mm(5)
- 15.875 mm(7)
- 16.0 mm(6)
- 19.05 mm(6)
- 20.0 mm(6)
- 25.0 mm(14)
- 25.4 mm(17)
- 31.7 mm(2)
- 31.75 mm(9)
- 32.0 mm(10)
- 38.1 mm(6)
- 40.0 mm(7)
- 44.45 mm(2)
- 50.0 mm(1)
- 50.8 mm(4)
to
Back-End Diameter
Back-End Diameter
- 1.0 in(1)
- 1.25 in(1)
- 1.5 in(1)
to
Shank Height
Shank Height
- 0.375 in(8)
- 0.3937 in(4)
- 0.394 in(2)
- 0.472 in(10)
- 0.4724 in(5)
- 0.5 in(16)
- 0.625 in(22)
- 0.6299 in(7)
- 0.63 in(17)
- 0.747 in(1)
- 0.7471 in(2)
- 0.75 in(50)
- 0.787 in(24)
- 0.7874 in(25)
- 0.978 in(10)
- 0.984 in(27)
- 0.9842 in(14)
- 0.9843 in(35)
- 0.985 in(2)
- 0.99 in(4)
- 1.0 in(63)
- 1.0224 in(1)
- 1.0225 in(2)
- 1.0227 in(2)
- 1.0236 in(1)
- 1.25 in(25)
- 1.2587 in(2)
- 1.2589 in(4)
- 1.2598 in(22)
- 1.26 in(4)
- 1.5 in(9)
- 1.5748 in(9)
- 2.0659 in(1)
to
Shank Height
Shank Height
- 9.525 mm(6)
- 9.53 mm(2)
- 10.0 mm(6)
- 12.0 mm(15)
- 12.7 mm(12)
- 12.71 mm(4)
- 15.875 mm(10)
- 15.88 mm(12)
- 16.0 mm(24)
- 19.0 mm(3)
- 19.05 mm(50)
- 20.0 mm(49)
- 24.84 mm(10)
- 25.0 mm(76)
- 25.019 mm(1)
- 25.02 mm(1)
- 25.146 mm(4)
- 25.4 mm(63)
- 25.97 mm(1)
- 26.0 mm(5)
- 31.75 mm(25)
- 31.975 mm(1)
- 32.0 mm(31)
- 38.1 mm(9)
- 40.0 mm(9)
- 52.5 mm(1)
to
Shank Width
Shank Width
- 0.065 in(3)
- 0.0709 in(3)
- 0.071 in(1)
- 0.0945 in(2)
- 0.126 in(1)
- 0.1339 in(2)
- 0.1732 in(1)
- 0.2126 in(1)
- 0.2756 in(2)
- 0.375 in(8)
- 0.3937 in(4)
- 0.394 in(2)
- 0.46 in(2)
- 0.472 in(7)
- 0.4724 in(5)
- 0.474 in(1)
- 0.5 in(16)
- 0.5118 in(1)
- 0.6236 in(2)
- 0.6244 in(2)
- 0.625 in(23)
- 0.6299 in(3)
- 0.63 in(17)
- 0.7087 in(1)
- 0.75 in(49)
- 0.7811 in(1)
- 0.7819 in(2)
- 0.787 in(24)
- 0.7874 in(21)
- 0.978 in(10)
- 0.984 in(26)
- 0.9842 in(14)
- 0.9843 in(36)
- 0.99 in(4)
- 1.0 in(67)
- 1.207 in(1)
- 1.25 in(26)
- 1.2598 in(23)
- 1.26 in(4)
- 1.5 in(6)
- 1.5748 in(6)
to
Shank Width
Shank Width
- 1.65 mm(3)
- 1.8 mm(4)
- 2.4 mm(2)
- 3.2 mm(1)
- 3.4 mm(2)
- 4.4 mm(1)
- 5.4 mm(1)
- 7.0 mm(2)
- 9.525 mm(6)
- 9.53 mm(2)
- 10.0 mm(6)
- 11.69 mm(2)
- 12.0 mm(13)
- 12.7 mm(12)
- 12.71 mm(4)
- 13.0 mm(1)
- 15.84 mm(2)
- 15.86 mm(2)
- 15.875 mm(10)
- 15.88 mm(12)
- 16.0 mm(20)
- 18.0 mm(1)
- 19.05 mm(50)
- 19.84 mm(1)
- 19.86 mm(2)
- 20.0 mm(45)
- 24.84 mm(10)
- 25.0 mm(76)
- 25.146 mm(4)
- 25.4 mm(67)
- 30.66 mm(1)
- 31.75 mm(26)
- 32.0 mm(27)
- 38.1 mm(6)
- 40.0 mm(6)
to
No filters matching ""
