Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 6010142 |
| ISO Catalog ID | RNGJ190600EML |
| ANSI Catalog ID | RNGJ64EML |
| Qualità | WP40PM |
| Numero di posizioni inserto | 12 |
| [D] Dimensione IC inserto | 19.05 mm |
| [D] Dimensione IC inserto | .75 in |
| [S] Spessore inserto | 6.35 mm |
| [S] Spessore inserto | .25 in |
| Spessore medio del truciolo [HM] | 0.02 mm |
| Spessore medio del truciolo [HM] | .0008 in |
Crea una soluzione per calcolare avanzamenti e velocità
Dopo aver creato una soluzione, basta scegliere l'icona Avanzamento e Velocità e il nostro sistema fornirà dei suggerimenti. Puoi personalizzare le informazioni aggiungendo la tua macchina e le specifiche o apportare delle modifiche utilizzando i cursori.
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P3–P4 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P5–P6 | .E..ML | WP25PM | .S..MM | WP35CM | .S..MM | WP35CM |
| M1–M2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| M3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| K1–K2 | – | – | .S..MM | WK15CM | – | – |
| K3 | – | – | .S..MM | WK15CM | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S4 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| H1 | – | – | .S..MM | WP25PM | – | – |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .003 | .009 | .016 | .003 | .007 | .012 | .002 | .006 | .010 | .002 | .006 | .010 | .002 | .005 | .009 | .E..ML |
| .S..MM | .007 | .015 | .027 | .005 | .011 | .020 | .005 | .010 | .017 | .004 | .009 | .016 | .004 | .009 | .016 | .S..MM |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .003 | .007 | .012 | .003 | .007 | .012 | .E..ML |
| .S..MM | .009 | .019 | .034 | .006 | .014 | .025 | .006 | .012 | .021 | .005 | .011 | .020 | .005 | .011 | .020 | .S..MM |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .008 | .021 | .037 | .006 | .016 | .027 | .005 | .014 | .023 | .005 | .013 | .022 | .005 | .012 | .021 | .E..ML |
| .S..MM | .016 | .035 | .065 | .012 | .025 | .046 | .010 | .022 | .040 | .010 | .020 | .037 | .009 | .020 | .036 | .S..MM |
| Light | General | Heavy |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .006 | .015 | .027 | .004 | .011 | .020 | .004 | .010 | .017 | .004 | .009 | .016 | .003 | .009 | .016 | .E..ML |
| .S..MM | .012 | .025 | .046 | .009 | .018 | .033 | .007 | .016 | .029 | .007 | .015 | .027 | .007 | .015 | .026 | .S..MM |
| Material Group | WK15CM | WP25PM | WU35PM | WP35CM | WP40PM | |||||||||||
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1025 | 905 | 845 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 |
| 2 | – | – | – | 1080 | 940 | 785 | 865 | 750 | 630 | 1105 | 1000 | 905 | 985 | 845 | 710 | |
| 3 | – | – | – | 1000 | 845 | 690 | 785 | 670 | 550 | 1000 | 905 | 805 | 905 | 770 | 630 | |
| 4 | – | – | – | 890 | 725 | 590 | 710 | 590 | 475 | 750 | 690 | 630 | 805 | 670 | 535 | |
| 5 | – | – | – | 725 | 670 | 590 | 590 | 535 | 475 | 1025 | 905 | 830 | 670 | 610 | 535 | |
| 6 | – | – | – | 650 | 490 | 395 | 510 | 395 | 310 | 630 | 535 | 430 | 590 | 450 | 355 | |
| M | 1 | – | – | – | 805 | 710 | 650 | 670 | 590 | 535 | 805 | 725 | 610 | 770 | 670 | 610 |
| 2 | – | – | – | 725 | 630 | 510 | 610 | 510 | 430 | 725 | 630 | 550 | 690 | 590 | 490 | |
| 3 | – | – | – | 550 | 475 | 370 | 450 | 395 | 310 | 570 | 510 | 450 | 510 | 450 | 355 | |
| K | 1 | 1655 | 1520 | 1340 | 905 | 805 | 725 | – | – | – | 1165 | 1045 | 940 | – | – | – |
| 2 | 1320 | 1165 | 1080 | 710 | 630 | 590 | – | – | – | 925 | 830 | 750 | – | – | – | |
| 3 | 1105 | 985 | 905 | 590 | 535 | 475 | – | – | – | 770 | 690 | 630 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 |
| 2 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 | |
| 3 | – | – | – | 200 | 155 | 95 | 180 | 140 | 95 | – | – | – | 200 | 155 | 120 | |
| 4 | – | – | – | 275 | 200 | 140 | 235 | 180 | 120 | 260 | 200 | 130 | 260 | 200 | 140 | |
| H | 1 | – | – | – | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
I have read and accepted the Terms & Conditions of use
ISO Catalogo
ANSI Catalogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?