Spianatura
Scanalatura: Testa piana
Contornatura/fresatura a spallamento: Testa sferica
Profilatura 3D
Fresatura — Senza refrigerante
Fresatura — laterale e frontale
Fresatura di tascheDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 5210218 |
| ISO Catalog ID | M200D125Z08RN16 |
| ANSI Catalog ID | M200D125Z08RN16 |
| [D1MAX] Diametro di taglio massimo | 125 mm |
| [D1MAX] Diametro di taglio massimo | 4.921 in |
| [D1] Diametro di taglio effettivo | 109 mm |
| [D1] Diametro di taglio effettivo | 4.291 in |
| [D] Dia adattatore / stelo / foro | 40 mm |
| [D] Dia adattatore / stelo / foro | 1.575 in |
| [D6] Diametro mozzo | 89.5 mm |
| [D6] Diametro mozzo | 3.524 in |
| [L] Lunghezza complessiva | 63 mm |
| [L] Lunghezza complessiva | 2.48 in |
| [AP1MAX] 1° profondità di taglio massima | 3.97 mm |
| [AP1MAX] 1° profondità di taglio massima | .156 in |
| Numero di inserti | 8 |
| Massimo angolo di rampa | 0.21 |
| Max giri/min | 14900 |
| Adduzione refrigerante | Y |
| Peso in chilogrammi | 2.5 |
SpianaturaScanalatura: Testa pianaContornatura/fresatura a spallamento: Testa sfericaProfilatura 3DFresatura — Senza refrigeranteFresatura — laterale e frontaleFresatura di tascheCrea una soluzione per calcolare avanzamenti e velocità
Dopo aver creato una soluzione, basta scegliere l'icona Avanzamento e Velocità e il nostro sistema fornirà dei suggerimenti. Puoi personalizzare le informazioni aggiungendo la tua macchina e le specifiche o apportare delle modifiche utilizzando i cursori.
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | ML | WP25PM | MM | WP40PM | MM | WP40PM |
| P3–P4 | ML | WP25PM | MM | WP25PM | MH | WP40PM |
| P5–P6 | ML | WP35CM | MM | WP35CM | MH | WP35CM |
| M1–M2 | ML | WP25PM | ML | WU35PM | MM | WU35PM |
| M3 | ML | WP25PM | MM | WU35PM | MM | WU35PM |
| K1–K2 | MH | WK15CM | MH | WK15CM | MH | WP20CM |
| K3 | MH | WK15CM | MH | WP20CM | MH | WP35CM |
| N1–N2 | ALP | WN25PM | ALP | WN25PM | ALP | WN25PM |
| N3 | ALP | WN25PM | ALP | WN25PM | ALP | WN25PM |
| S1–S2 | ML | WS30PM | ML | WS30PM | ML | WU35PM |
| S3 | ML | WS30PM | ML | WU35PM | ML | WU35PM |
| S4 | ML | WS30PM | ML | WU35PM | ML | WU35PM |
| H1 | MH | WP25PM | MH | WP20CM | – | – |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
| ML | 0,12 | 0,37 | 0,48 | 0,09 | 0,27 | 0,35 | 0,07 | 0,20 | 0,26 | 0,06 | 0,17 | 0,23 | 0,05 | 0,16 | 0,21 | ML |
| MM | 0,28 | 0,70 | 0,81 | 0,21 | 0,50 | 0,58 | 0,15 | 0,38 | 0,44 | 0,13 | 0,33 | 0,38 | 0,12 | 0,30 | 0,35 | MM |
| MH | 0,53 | 0,70 | 1,17 | 0,38 | 0,50 | 0,84 | 0,29 | 0,38 | 0,63 | 0,25 | 0,33 | 0,55 | 0,23 | 0,30 | 0,50 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
| ML | 0,14 | 0,43 | 0,56 | 0,10 | 0,31 | 0,40 | 0,08 | 0,23 | 0,30 | 0,07 | 0,20 | 0,26 | 0,06 | 0,18 | 0,24 | ML |
| MM | 0,33 | 0,81 | 0,94 | 0,24 | 0,58 | 0,67 | 0,18 | 0,43 | 0,50 | 0,16 | 0,38 | 0,44 | 0,14 | 0,35 | 0,40 | MM |
| MH | 0,62 | 0,81 | 1,36 | 0,44 | 0,58 | 0,97 | 0,33 | 0,43 | 0,72 | 0,29 | 0,38 | 0,63 | 0,27 | 0,35 | 0,58 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
| ML | 0,26 | 0,77 | 1,01 | 0,19 | 0,55 | 0,73 | 0,14 | 0,41 | 0,54 | 0,12 | 0,36 | 0,47 | 0,11 | 0,33 | 0,43 | ML |
| MM | 0,59 | 1,46 | 1,70 | 0,43 | 1,04 | 1,21 | 0,32 | 0,78 | 0,90 | 0,28 | 0,68 | 0,79 | 0,25 | 0,62 | 0,72 | MM |
| MH | 1,11 | 1,46 | 2,48 | 0,80 | 1,04 | 1,75 | 0,60 | 0,78 | 1,30 | 0,52 | 0,68 | 1,13 | 0,48 | 0,62 | 1,03 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
| ML | 0,19 | 0,56 | 0,73 | 0,14 | 0,40 | 0,53 | 0,10 | 0,30 | 0,40 | 0,09 | 0,26 | 0,34 | 0,08 | 0,24 | 0,32 | ML |
| MM | 0,43 | 1,06 | 1,24 | 0,31 | 0,76 | 0,89 | 0,23 | 0,57 | 0,66 | 0,20 | 0,50 | 0,57 | 0,19 | 0,45 | 0,53 | MM |
| MH | 0,81 | 1,06 | 1,79 | 0,58 | 0,76 | 1,28 | 0,44 | 0,57 | 0,95 | 0,38 | 0,50 | 0,83 | 0,35 | 0,45 | 0,76 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
| ML | .005 | .015 | .019 | .004 | .011 | .014 | .003 | .008 | .010 | .002 | .007 | .009 | .002 | .006 | .008 | ML |
| MM | .011 | .027 | .032 | .008 | .020 | .023 | .006 | .015 | .017 | .005 | .013 | .015 | .005 | .012 | .014 | MM |
| MH | .021 | .027 | .046 | .015 | .020 | .033 | .011 | .015 | .025 | .010 | .013 | .021 | .009 | .012 | .020 | MH |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
| ML | .006 | .017 | .022 | .004 | .012 | .016 | .003 | .009 | .012 | .003 | .008 | .010 | .002 | .007 | .010 | ML |
| MM | .013 | .032 | .037 | .009 | .023 | .026 | .007 | .017 | .020 | .006 | .015 | .017 | .006 | .014 | .016 | MM |
| MH | .024 | .032 | .053 | .018 | .023 | .038 | .013 | .017 | .029 | .011 | .015 | .025 | .010 | .014 | .023 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
| ML | .010 | .030 | .040 | .007 | .022 | .029 | .005 | .016 | .021 | .005 | .014 | .019 | .004 | .013 | .017 | ML |
| MM | .023 | .058 | .067 | .017 | .041 | .047 | .012 | .031 | .035 | .011 | .027 | .031 | .010 | .024 | .028 | MM |
| MH | .044 | .058 | .098 | .031 | .041 | .069 | .023 | .031 | .051 | .020 | .027 | .044 | .019 | .024 | .041 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
| ML | .007 | .022 | .029 | .005 | .016 | .021 | .004 | .012 | .016 | .003 | .010 | .014 | .003 | .010 | .012 | ML |
| MM | .017 | .042 | .048 | .012 | .030 | .035 | .009 | .022 | .026 | .008 | .019 | .022 | .007 | .018 | .021 | MM |
| MH | .032 | .042 | .071 | .023 | .030 | .050 | .017 | .022 | .037 | .015 | .019 | .033 | .014 | .018 | .030 | MH |
| Material Group | WK15CM | WK15PM | WN25PM | WP20CM | WP25PM | |||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | 660 | 580 | 540 | 395 | 340 | 325 |
| 2 | – | – | – | – | – | – | – | – | – | 410 | 370 | 330 | 330 | 290 | 240 | |
| 3 | – | – | – | – | – | – | – | – | – | 370 | 330 | 305 | 305 | 260 | 210 | |
| 4 | – | – | – | – | – | – | – | – | – | 275 | 260 | 230 | 270 | 220 | 180 | |
| 5 | – | – | – | – | – | – | – | – | – | 330 | 300 | 275 | 220 | 205 | 180 | |
| 6 | – | – | – | – | – | – | – | – | – | 230 | 205 | 175 | 200 | 150 | 120 | |
| M | 1 | – | – | – | – | – | – | – | – | – | 270 | 240 | 210 | 245 | 215 | 200 |
| 2 | – | – | – | – | – | – | – | – | – | 245 | 210 | 190 | 220 | 190 | 155 | |
| 3 | – | – | – | – | – | – | – | – | – | 190 | 175 | 150 | 170 | 145 | 115 | |
| K | 1 | 505 | 460 | 410 | 400 | 290 | 215 | – | – | – | 430 | 390 | 355 | 275 | 245 | 220 |
| 2 | 400 | 355 | 330 | 350 | 235 | 170 | – | – | – | 340 | 305 | 280 | 215 | 190 | 180 | |
| 3 | 335 | 300 | 275 | 280 | 245 | 165 | – | – | – | 290 | 260 | 240 | 180 | 160 | 145 | |
| N | 1 | – | – | – | – | – | – | 1290 | 1135 | 1050 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 1135 | 1050 | 910 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 1135 | 1050 | 910 | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 60 | 50 | 30 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | 85 | 60 | 40 | |
| H | 1 | – | – | – | – | – | – | – | – | – | 170 | 140 | 115 | 145 | 110 | 85 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WP35CM | WP40PM | WS30PM | WS40PM | WU35PM | |||||||||||
| P | 1 | 545 | 475 | 445 | 355 | 310 | 295 | 445 | 385 | 360 | 280 | 245 | 230 | 310 | 275 | 260 |
| 2 | 335 | 305 | 275 | 300 | 260 | 215 | 365 | 325 | 265 | 235 | 205 | 170 | 265 | 230 | 190 | |
| 3 | 305 | 275 | 245 | 275 | 235 | 190 | 340 | 290 | 235 | 215 | 185 | 150 | 240 | 205 | 170 | |
| 4 | 230 | 210 | 190 | 245 | 205 | 160 | 300 | 245 | 200 | 195 | 160 | 130 | 215 | 180 | 145 | |
| 5 | 310 | 275 | 250 | 205 | 185 | 160 | 245 | 230 | 200 | 160 | 140 | 130 | 180 | 160 | 145 | |
| 6 | 190 | 160 | 130 | 180 | 140 | 110 | 220 | 170 | 130 | 140 | 110 | 85 | 155 | 120 | 95 | |
| M | 1 | 245 | 220 | 185 | 235 | 205 | 185 | 270 | 240 | 220 | 260 | 190 | 115 | 205 | 180 | 160 |
| 2 | 220 | 190 | 170 | 210 | 180 | 150 | 245 | 215 | 175 | 230 | 170 | 105 | 185 | 155 | 130 | |
| 3 | 175 | 155 | 140 | 155 | 140 | 110 | 185 | 160 | 125 | 190 | 140 | 80 | 140 | 120 | 95 | |
| K | 1 | 355 | 320 | 290 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 280 | 250 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 235 | 210 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | 1075 | 945 | 945 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 945 | 875 | 845 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 875 | 760 | 760 | – | – | – | |
| S | 1 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 62 | 45 | 27 | 40 | 35 | 30 |
| 2 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 55 | 40 | 26 | 40 | 35 | 30 | |
| 3 | – | – | – | 60 | 50 | 35 | 65 | 55 | 35 | 64 | 46 | 29 | 55 | 40 | 30 | |
| 4 | 80 | 60 | 40 | 80 | 60 | 40 | 100 | 70 | 50 | 90 | 66 | 42 | 70 | 55 | 35 | |
| H | 1 | – | – | – | – | – | – | 160 | 120 | 90 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WK15CM | WN25PM | WP20CM | WP25PM | WP35CM | WP40PM | WS30PM | WU35PM | |||||||||||||||||
| P | 1 | – | – | – | – | – | – | 2165 | 1910 | 1770 | 1295 | 1120 | 1060 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 | 1460 | 1260 | 1180 | 1025 | 905 | 845 |
| 2 | – | – | – | – | – | – | 1340 | 1220 | 1080 | 1080 | 940 | 785 | 1105 | 1000 | 905 | 985 | 845 | 710 | 1200 | 1060 | 865 | 865 | 750 | 630 | |
| 3 | – | – | – | – | – | – | 1220 | 1080 | 1000 | 1000 | 845 | 690 | 1000 | 905 | 805 | 905 | 770 | 630 | 1120 | 940 | 770 | 785 | 670 | 550 | |
| 4 | – | – | – | – | – | – | 905 | 845 | 750 | 890 | 725 | 590 | 750 | 690 | 630 | 805 | 670 | 535 | 985 | 805 | 650 | 710 | 590 | 475 | |
| 5 | – | – | – | – | – | – | 1080 | 985 | 905 | 725 | 670 | 590 | 1025 | 905 | 830 | 670 | 610 | 535 | 805 | 750 | 650 | 590 | 535 | 475 | |
| 6 | – | – | – | – | – | – | 750 | 670 | 570 | 650 | 490 | 395 | 630 | 535 | 430 | 590 | 450 | 355 | 725 | 550 | 430 | 510 | 395 | 310 | |
| M | 1 | – | – | – | – | – | – | 890 | 785 | 690 | 805 | 710 | 650 | 805 | 725 | 610 | 770 | 670 | 610 | 890 | 785 | 725 | 670 | 590 | 535 |
| 2 | – | – | – | – | – | – | 805 | 690 | 630 | 725 | 630 | 510 | 725 | 630 | 550 | 690 | 590 | 490 | 805 | 710 | 570 | 610 | 510 | 430 | |
| 3 | – | – | – | – | – | – | 630 | 570 | 490 | 550 | 475 | 370 | 570 | 510 | 450 | 510 | 450 | 355 | 610 | 535 | 415 | 450 | 395 | 310 | |
| K | 1 | 1655 | 1520 | 1340 | – | – | – | 1415 | 1280 | 1165 | 905 | 805 | 725 | 1165 | 1045 | 940 | – | – | – | – | – | – | – | – | – |
| 2 | 1320 | 1165 | 1080 | – | – | – | 1120 | 1000 | 925 | 710 | 630 | 590 | 925 | 830 | 750 | – | – | – | – | – | – | – | – | – | |
| 3 | 1105 | 985 | 905 | – | – | – | 940 | 845 | 785 | 590 | 535 | 475 | 770 | 690 | 630 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | 4230 | 3720 | 3445 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | 3720 | 3445 | 2995 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | 3720 | 3445 | 2995 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 155 | 140 | 95 | – | – | – | 155 | 140 | 120 | 180 | 155 | 120 | 140 | 120 | 95 |
| 2 | – | – | – | – | – | – | – | – | – | 155 | 140 | 95 | – | – | – | 155 | 140 | 120 | 180 | 155 | 120 | 140 | 120 | 95 | |
| 3 | – | – | – | – | – | – | – | – | – | 200 | 155 | 95 | – | – | – | 200 | 155 | 120 | 215 | 180 | 120 | 180 | 140 | 95 | |
| 4 | – | – | – | – | – | – | – | – | – | 275 | 200 | 140 | 260 | 200 | 130 | 260 | 200 | 140 | 335 | 235 | 155 | 235 | 180 | 120 | |
| H | 1 | – | – | – | – | – | – | 550 | 450 | 370 | 475 | 355 | 275 | – | – | – | – | – | – | 535 | 395 | 295 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
I have read and accepted the Terms & Conditions of use
ISO Catalogo
ANSI Catalogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
