WCE5 • Series W531 • Sharp Edge • 5 Flute • Weldon® Shank • Extra Long • Inch

Name: WCE5 • Series W531 • Sharp Edge • 5 Flute • Weldon® Shank • Extra Long • Inch
SKU: 101274099
Rating: 0 (0 reviews)

Versatile 5-Flute Solid Carbide End Mill

Features and benefits

WU20PE Grade

38 degree helix to increase performance in a variety of applications

Unequal index to reduce vibration/chatter

Eccentric relief to provide vibration dampening and increase tool life on Steel, Stainless Steel and Cast Iron materials

Core taper to increase tool stability and chip evacuation

Uses and application

Trochoidal Milling
Fresatura a riccio
Fresatura in rampa: Grezzo
Contornatura/fresatura a spallamento: Testa piana

Parti compatibili


					WU20PE			Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%.
		Side Milling		Slotting	Cutting Speed Vc m/min				D1 Diameter
Material Group		ap	ae	ap	Min	Start	Max	mm	4,0	5,0	6,0	8,0	10,0	12,0	14,0	16,0	18,0	20,0	25,0
P	0	ap1max	0,4 x D	0,3 x D	150	–	200	fz	0,028	0,036	0,044	0,060	0,072	0,083	0,092	0,101	0,108	0,114	0,124
P	1	ap1max	0,4 x D	0,3 x D	150	–	200	fz	0,028	0,036	0,044	0,060	0,072	0,083	0,092	0,101	0,108	0,114	0,124
P	2	ap1max	0,4 x D	0,3 x D	140	–	190	fz	0,028	0,036	0,044	0,060	0,072	0,083	0,092	0,101	0,108	0,114	0,124
P	3	ap1max	0,4 x D	0,3 x D	120	–	160	fz	0,023	0,030	0,036	0,050	0,061	0,070	0,079	0,087	0,095	0,101	0,114
P	4	ap1max	0,4 x D	0,3 x D	90	–	150	fz	0,021	0,027	0,033	0,045	0,054	0,062	0,070	0,077	0,083	0,088	0,098
P	5	ap1max	0,4 x D	0,3 x D	60	–	100	fz	0,019	0,024	0,029	0,040	0,048	0,056	0,063	0,070	0,076	0,081	0,091
P	6	ap1max	0,4 x D	0,3 x D	50	–	75	fz	0,016	0,020	0,025	0,034	0,040	0,047	0,052	0,057	0,061	0,065	0,071
M	1	ap1max	0,4 x D	0,3 x D	90	–	115	fz	0,023	0,030	0,036	0,050	0,061	0,070	0,079	0,087	0,095	0,101	0,114
M	2	ap1max	0,4 x D	0,3 x D	60	–	80	fz	0,019	0,024	0,029	0,040	0,048	0,056	0,063	0,070	0,076	0,081	0,091
M	3	ap1max	0,4 x D	0,3 x D	60	–	70	fz	0,016	0,020	0,025	0,034	0,040	0,047	0,052	0,057	0,061	0,065	0,071
K	1	ap1max	0,4 x D	0,3 x D	120	–	150	fz	0,028	0,036	0,044	0,060	0,072	0,083	0,092	0,101	0,108	0,114	0,124
K	2	ap1max	0,4 x D	0,3 x D	110	–	140	fz	0,023	0,030	0,036	0,050	0,061	0,070	0,079	0,087	0,095	0,101	0,114
K	3	ap1max	0,4 x D	0,3 x D	110	–	130	fz	0,019	0,024	0,029	0,040	0,048	0,056	0,063	0,070	0,076	0,081	0,091
S	1	ap1max	0,3 x D	0,2 x D	50	–	90	fz	0,023	0,030	0,036	0,050	0,061	0,070	0,079	0,087	0,095	0,101	0,114
S	2	ap1max	0,3 x D	0,2 x D	25	–	40	fz	0,013	0,016	0,019	0,026	0,032	0,037	0,042	0,046	0,050	0,054	0,061
S	3	ap1max	0,4 x D	0,3 x D	60	–	80	fz	0,019	0,024	0,029	0,040	0,048	0,056	0,063	0,070	0,076	0,081	0,091
S	4	ap1max	0,4 x D	0,3 x D	50	–	60	fz	0,016	0,021	0,026	0,037	0,045	0,052	0,058	0,064	0,069	0,074	0,084
H	1	ap1max	0,4 x D	0,3 x D	80	–	140	fz	0,021	0,027	0,033	0,045	0,054	0,062	0,070	0,077	0,083	0,088	0,098
H	2	ap1max	0,2 x D	0,3 x D	70	–	120	fz	0,016	0,020	0,025	0,034	0,040	0,047	0,052	0,057	0,061	0,065	0,071


					WU20PE			Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%.
		Side Milling		Slotting	Cutting Speed Vc m/min				D1 Diameter
Material Group		ap	ae	ap	Min	Start	Max	frac.	3/16	1/4	5/16	3/8	7/16	1/2	5/8	3/4	1	1 1/4
Material Group		ap	ae	ap	Min	Start	Max	in	0.1875	0.2500	0.3125	0.3750	0.4375	0.5000	0.6250	0.7500	1.0000	1.2500
P	0	ap1max	0.4 x D	0.3 x D	490	–	660	IPT	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
P	1	ap1max	0.4 x D	0.3 x D	490	–	660	IPT	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
P	2	ap1max	0.4 x D	0.3 x D	460	–	620	IPT	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
P	3	ap1max	0.4 x D	0.3 x D	390	–	520	IPT	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
P	4	ap1max	0.4 x D	0.3 x D	300	–	490	IPT	0.0010	0.0014	0.0017	0.0020	0.0023	0.0026	0.0030	0.0034	0.0039	0.0040
P	5	ap1max	0.4 x D	0.3 x D	200	–	330	IPT	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
P	6	ap1max	0.4 x D	0.3 x D	160	–	250	IPT	0.0008	0.0010	0.0013	0.0015	0.0017	0.0019	0.0022	0.0025	0.0028	0.0029
M	1	ap1max	0.4 x D	0.3 x D	300	–	380	IPT	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
M	2	ap1max	0.4 x D	0.3 x D	200	–	260	IPT	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
M	3	ap1max	0.4 x D	0.3 x D	200	–	230	IPT	0.0008	0.0010	0.0013	0.0015	0.0017	0.0019	0.0022	0.0025	0.0028	0.0029
K	1	ap1max	0.4 x D	0.3 x D	390	–	490	IPT	0.0013	0.0018	0.0023	0.0027	0.0031	0.0034	0.0039	0.0044	0.0049	0.0049
K	2	ap1max	0.4 x D	0.3 x D	360	–	460	IPT	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
K	3	ap1max	0.4 x D	0.3 x D	360	–	430	IPT	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
S	1	ap1max	0.3 x D	0.2 x D	160	–	300	IPT	0.0011	0.0015	0.0020	0.0023	0.0026	0.0029	0.0034	0.0039	0.0045	0.0048
S	2	ap1max	0.3 x D	0.2 x D	80	–	130	IPT	0.0006	0.0008	0.0010	0.0012	0.0014	0.0015	0.0018	0.0021	0.0024	0.0026
S	3	ap1max	0.4 x D	0.3 x D	200	–	260	IPT	0.0009	0.0012	0.0016	0.0018	0.0021	0.0023	0.0027	0.0031	0.0036	0.0039
S	4	ap1max	0.4 x D	0.3 x D	160	–	200	IPT	0.0008	0.0011	0.0014	0.0017	0.0019	0.0021	0.0025	0.0028	0.0033	0.0036
H	1	ap1max	0.4 x D	0.3 x D	260	–	460	IPT	0.0010	0.0014	0.0017	0.0020	0.0023	0.0026	0.0030	0.0034	0.0039	0.0040
H	2	ap1max	0.2 x D	0.3 x D	230	–	390	IPT	0.0008	0.0010	0.0013	0.0015	0.0017	0.0019	0.0022	0.0025	0.0028	0.0029

Benvenuto

Conferma le tue preferenze

Aggiorna preferenze

Suggerimenti sui prodotti

Product Family suggestions

Contatta il Team di vendita

Contatta il Team di vendita

Modifica della soluzione

Soluzione aggiunta

WCE5 • Series W531 • Sharp Edge • 5 Flute • Weldon® Shank • Extra Long • Inch

Versatile 5-Flute Solid Carbide End Mill

Features and benefits

Uses and application

Suggerimenti sui prodotti

Product Family suggestions

Contatta il Team di vendita

Notifications

Contatta il Team di vendita

Sending to {{cadTool}} in progress...

WCE5 • Series W531 • Sharp Edge • 5 Flute • Weldon® Shank • Extra Long • Inch

Versatile 5-Flute Solid Carbide End Mill

Features and benefits

Uses and application

The following files are available