Prodotto simile a :
VariMill II ER™ • Series 5VNE • Square End • Eccentric Relief • Neck • 5 Flute • Inch
VariMill II™ ER • Series 5VNE • Inch
Material Number100016085
Features and benefits
- Unequal flute spacing
- Center cutting
- Optimized geometry for titanium and stainless steel
- Single tool for both roughing and finishing operations requiring fewer setups
- Standard items listed and additional styles and coatings made-to-order
- 100029627
- Trochoidal Milling
- Fresatura in rampa: Grezzo
- Scanalatura: Testa piana
- Corner Style: Corner RadiusTipo angolo Raggio di punta
- Codolo — Cilindrico liscio
- Codolo — Cilindrico Weldon
- Contornatura/fresatura a spallamento: Testa piana
- Angolo elica: 38°
- Tool Dimensions: Flute Configuration: 5
- Codolo Safe-Lock
Application Data • VariMill II™ ER • Series 5VNE • Inch
Contornatura (A) | WS15PE | Avanzamento per dente consigliato (IPT = pollici/dente) per la contornatura (A). Per cave dal pieno (B), ridurre IPT del 20% | |||||||||||||
A | B | Velocità di taglio | D1 | ||||||||||||
frac. | 1/4 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | ||||||||
Gruppo materiali | ap | ae | ap | Min | Max | dec. | .2500 | .3750 | .5000 | .6250 | .7500 | 1.0000 | 1.2500 | ||
P | 4 | 1.5 x D | 0.5 x D | 0.75 x D | 300 | – | 490 | IPT | 0.0014 | 0.0020 | 0.0026 | 0.0030 | 0.0034 | 0.0039 | 0.0040 |
5 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 330 | IPT | 0.0012 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 | |
6 | 1.5 x D | 0.5 x D | 0.75 x D | 160 | – | 250 | IPT | 0.0010 | 0.0015 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 | |
M | 1 | 1.5 x D | 0.5 x D | 1 x D | 300 | – | 380 | IPT | 0.0015 | 0.0023 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
2 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | IPT | 0.0012 | 0.0018 | 0.0023 | 0.0027 | 0.0031 | 0.0036 | 0.0039 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 230 | IPT | 0.0010 | 0.0015 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 | |
S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 300 | IPT | 0.0015 | 0.0023 | 0.0029 | 0.0034 | 0.0039 | 0.0045 | 0.0048 |
2 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | IPT | 0.0008 | 0.0012 | 0.0015 | 0.0018 | 0.0021 | 0.0024 | 0.0026 | |
3 | 1.5 x D | 0.5 x D | 1 x D | 80 | – | 130 | IPT | 0.0008 | 0.0012 | 0.0015 | 0.0018 | 0.0021 | 0.0024 | 0.0026 | |
4 | 1.5 x D | 0.5 x D | 1 x D | 160 | – | 200 | IPT | 0.0011 | 0.0017 | 0.0021 | 0.0025 | 0.0028 | 0.0033 | 0.0036 | |
H | 1 | 1.5 x D | 0.5 x D | 0.75 x D | 260 | – | 460 | IPT | 0.0014 | 0.0020 | 0.0026 | 0.0030 | 0.0034 | 0.0039 | 0.0040 |
2 | 1.5 x D | 0.2 x D | 0.5 x D | 230 | – | 390 | IPT | 0.0010 | 0.0015 | 0.0019 | 0.0022 | 0.0025 | 0.0028 | 0.0029 |