Produit similaire à:
M200 • Shell Mills • Inch
Shell Mills • Inch
Numéro de matériel5283482
Ref. ISO CatalogueM200D150Z05S050RN10Ref. ANSI CatalogueM200D150Z05S050RN10
- P Acier
- M Acier inoxydable
- K Fonte
- N Non ferreux
- S Alliages hautes températures
- H Matériaux trempés
- Surfaçage
- Rainurage : Bout plat
- Fraisage de côté/avec épaulement : Bout hémisphérique
- Profilage 3D
- Fraisage — Arrosage interne
- Fraisage — 3 tailles
- Usinage de poches
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Aperçu
- Données d'application
- Téléchargements
- Pièces compatibles côté machine
- Pièces compatibles côté pièce
- Pièces de rechange
- Révision
- FAQ
Numéro de matériel | 5283482 |
Ref. ISO Catalogue | M200D150Z05S050RN10 |
Ref. ANSI Catalogue | M200D150Z05S050RN10 |
[D1MAX] Diamètre de coupe maximal | 38.1 mm |
[D1MAX] Diamètre de coupe maximal | 1.5 in |
[D1] Diamètre effectif de coupe | 28.1 mm |
[D1] Diamètre effectif de coupe | 1.106 in |
[D] Adaptateur / Queue / Diamètre d’alésage | 12.7 mm |
[D] Adaptateur / Queue / Diamètre d’alésage | .5 in |
[D6] Diamètre du moyeu | 33.02 mm |
[D6] Diamètre du moyeu | 1.3 in |
[L] Longueur totale | 39.88 mm |
[L] Longueur totale | 1.57 in |
[AP1MAX] 1re profondeur de coupe maximale | 5 mm |
[AP1MAX] 1re profondeur de coupe maximale | .2 in |
Nombre de plaquettes | 5 |
Angle de ramping maximum | 0.37 |
T/Min max | 44300 |
Alimentation en arrosage | Y |
Poids Livres | 0.43 |
Matériaux de pièce à usiner
- Acier
- Acier inoxydable
- Fonte
- Non ferreux
- Alliages hautes températures
- Matériaux trempés
Uses and application
- Surfaçage
- Rainurage : Bout plat
- Fraisage de côté/avec épaulement : Bout hémisphérique
- Profilage 3D
- Fraisage — Arrosage interne
- Fraisage — 3 tailles
- Usinage de poches
Features and benefits
- Double-sided, eight cutting edges.
- Anti-rotation feature for better stability and higher feed rates.
- Pocketing and profiling capabilities.
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
Guide de sélection des plaquettes
Light | General | Heavy | ||||
Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | ML | WP25PM | MM | WP40PM | MM | WP40PM |
P3–P4 | ML | WP25PM | MM | WP25PM | MH | WP40PM |
P5–P6 | ML | WP35CM | MM | WP35CM | MH | WP35CM |
M1–M2 | ML | WP25PM | ML | WU35PM | MM | WU35PM |
M3 | ML | WP25PM | MM | WU35PM | MM | WU35PM |
K1–K2 | MH | WK15CM | MH | WK15CM | MH | WP20CM |
K3 | MH | WK15CM | MH | WK15CM | MH | WP25PM |
N1–N2 | ALP | WN25PM | ALP | WN25PM | ALP | WN25PM |
N3 | ALP | WN25PM | ALP | WN25PM | ALP | WN25PM |
S1–S2 | ML | WS30PM | MM | WS30PM | MM | WU35PM |
S3 | ML | WS30PM | MM | WU35PM | MM | WU35PM |
S4 | ML | WS30PM | MM | WU35PM | MM | WU35PM |
H1 | MH | WP25PM | MH | WP20CM | – | – |
Feeds
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
ML | 0,13 | 0,44 | 0,80 | 0,10 | 0,32 | 0,57 | 0,07 | 0,24 | 0,43 | 0,06 | 0,21 | 0,37 | 0,06 | 0,19 | 0,34 | ML |
MM | 0,28 | 0,50 | 0,91 | 0,20 | 0,36 | 0,66 | 0,15 | 0,27 | 0,49 | 0,13 | 0,24 | 0,43 | 0,12 | 0,22 | 0,39 | MM |
MH | 0,46 | 0,58 | 0,96 | 0,33 | 0,42 | 0,69 | 0,25 | 0,31 | 0,51 | 0,22 | 0,27 | 0,45 | 0,20 | 0,25 | 0,41 | MH |
Light | General | Heavy |
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
ML | 0,27 | 0,92 | 1,67 | 0,20 | 0,66 | 1,19 | 0,15 | 0,49 | 0,89 | 0,13 | 0,43 | 0,77 | 0,12 | 0,39 | 0,71 | ML |
MM | 0,58 | 1,05 | 1,92 | 0,42 | 0,75 | 1,37 | 0,31 | 0,56 | 1,02 | 0,27 | 0,49 | 0,88 | 0,25 | 0,45 | 0,81 | MM |
MH | 0,96 | 1,21 | 2,02 | 0,69 | 0,87 | 1,43 | 0,52 | 0,65 | 1,06 | 0,45 | 0,56 | 0,93 | 0,41 | 0,52 | 0,85 | MH |
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
ML | 0,15 | 0,51 | 0,92 | 0,11 | 0,37 | 0,66 | 0,08 | 0,27 | 0,49 | 0,07 | 0,24 | 0,43 | 0,07 | 0,22 | 0,39 | ML |
MM | 0,32 | 0,58 | 1,06 | 0,23 | 0,42 | 0,76 | 0,18 | 0,31 | 0,57 | 0,15 | 0,27 | 0,49 | 0,14 | 0,25 | 0,45 | MM |
MH | 0,54 | 0,67 | 1,11 | 0,39 | 0,48 | 0,80 | 0,29 | 0,36 | 0,59 | 0,25 | 0,32 | 0,52 | 0,23 | 0,29 | 0,47 | MH |
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
ALP | 0,12 | 0,20 | 0,28 | 0,08 | 0,15 | 0,20 | 0,06 | 0,11 | 0,15 | 0,06 | 0,09 | 0,13 | 0,05 | 0,09 | 0,12 | ALP |
ML | 0,20 | 0,67 | 1,21 | 0,14 | 0,48 | 0,87 | 0,11 | 0,36 | 0,65 | 0,09 | 0,31 | 0,56 | 0,09 | 0,29 | 0,52 | ML |
MM | 0,43 | 0,77 | 1,39 | 0,31 | 0,55 | 1,00 | 0,23 | 0,41 | 0,74 | 0,20 | 0,36 | 0,65 | 0,18 | 0,33 | 0,59 | MM |
MH | 0,70 | 0,88 | 1,46 | 0,51 | 0,63 | 1,04 | 0,38 | 0,47 | 0,78 | 0,33 | 0,41 | 0,68 | 0,30 | 0,38 | 0,62 | MH |
Light | General | Heavy |
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
ML | .005 | .017 | .031 | .004 | .013 | .023 | .003 | .009 | .017 | .002 | .008 | .015 | .002 | .008 | .014 | ML |
MM | .011 | .020 | .036 | .008 | .014 | .026 | .006 | .011 | .019 | .005 | .009 | .017 | .005 | .009 | .015 | MM |
MH | .018 | .023 | .038 | .013 | .016 | .027 | .010 | .012 | .020 | .009 | .011 | .018 | .008 | .010 | .016 | MH |
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
ML | .006 | .020 | .036 | .004 | .014 | .026 | .003 | .011 | .020 | .003 | .009 | .017 | .003 | .009 | .016 | ML |
MM | .013 | .023 | .041 | .009 | .016 | .030 | .007 | .012 | .022 | .006 | .011 | .019 | .005 | .010 | .018 | MM |
MH | .021 | .026 | .044 | .015 | .019 | .031 | .011 | .014 | .023 | .010 | .012 | .020 | .009 | .011 | .019 | MH |
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
ML | .011 | .036 | .066 | .008 | .026 | .047 | .006 | .019 | .035 | .005 | .017 | .030 | .005 | .015 | .028 | ML |
MM | .023 | .041 | .075 | .016 | .029 | .053 | .012 | .022 | .040 | .011 | .019 | .035 | .010 | .018 | .032 | MM |
MH | .038 | .048 | .079 | .027 | .034 | .056 | .020 | .025 | .042 | .018 | .022 | .036 | .016 | .020 | .033 | MH |
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
ALP | .005 | .007 | .009 | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | ALP |
ML | .008 | .026 | .048 | .006 | .019 | .034 | .004 | .014 | .026 | .004 | .012 | .022 | .003 | .011 | .020 | ML |
MM | .017 | .030 | .054 | .012 | .022 | .039 | .009 | .016 | .029 | .008 | .014 | .025 | .007 | .013 | .023 | MM |
MH | .028 | .035 | .058 | .020 | .025 | .041 | .015 | .019 | .031 | .013 | .016 | .027 | .012 | .015 | .024 | MH |
Speeds
Vitesses de départ recommandées [m/mn]
Material Group | WK15CM | WK15PM | WN25PM | WP20CM | WP25PM | |||||||||||
P | 1 | – | – | – | – | – | – | – | – | – | 660 | 580 | 540 | 395 | 340 | 325 |
2 | – | – | – | – | – | – | – | – | – | 410 | 370 | 330 | 330 | 290 | 240 | |
3 | – | – | – | – | – | – | – | – | – | 370 | 330 | 305 | 305 | 260 | 210 | |
4 | – | – | – | – | – | – | – | – | – | 275 | 260 | 230 | 270 | 220 | 180 | |
5 | – | – | – | – | – | – | – | – | – | 330 | 300 | 275 | 220 | 205 | 180 | |
6 | – | – | – | – | – | – | – | – | – | 230 | 205 | 175 | 200 | 150 | 120 | |
M | 1 | – | – | – | – | – | – | – | – | – | 270 | 240 | 210 | 245 | 215 | 200 |
2 | – | – | – | – | – | – | – | – | – | 245 | 210 | 190 | 220 | 190 | 155 | |
3 | – | – | – | – | – | – | – | – | – | 190 | 175 | 150 | 170 | 145 | 115 | |
K | 1 | 505 | 460 | 410 | 400 | 290 | 215 | – | – | – | 430 | 390 | 355 | 275 | 245 | 220 |
2 | 400 | 355 | 330 | 350 | 235 | 170 | – | – | – | 340 | 305 | 280 | 215 | 190 | 180 | |
3 | 335 | 300 | 275 | 280 | 245 | 165 | – | – | – | 290 | 260 | 240 | 180 | 160 | 145 | |
N | 1 | – | – | – | – | – | – | 1290 | 1135 | 1050 | – | – | – | – | – | – |
2 | – | – | – | – | – | – | 1135 | 1050 | 910 | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | 1135 | 1050 | 910 | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 |
2 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | 60 | 50 | 30 | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | 85 | 60 | 40 | |
H | 1 | – | – | – | – | – | – | – | – | – | 170 | 140 | 115 | 145 | 110 | 85 |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Material Group | WP35CM | WP40PM | WS30PM | WS40PM | WU35PM | |||||||||||
P | 1 | 545 | 475 | 445 | 355 | 310 | 295 | 445 | 385 | 360 | 280 | 245 | 230 | 310 | 275 | 260 |
2 | 335 | 305 | 275 | 300 | 260 | 215 | 365 | 325 | 265 | 235 | 205 | 170 | 265 | 230 | 190 | |
3 | 305 | 275 | 245 | 275 | 235 | 190 | 340 | 290 | 235 | 215 | 185 | 150 | 240 | 205 | 170 | |
4 | 230 | 210 | 190 | 245 | 205 | 160 | 300 | 245 | 200 | 195 | 160 | 130 | 215 | 180 | 145 | |
5 | 310 | 275 | 250 | 205 | 185 | 160 | 245 | 230 | 200 | 160 | 140 | 130 | 180 | 160 | 145 | |
6 | 190 | 160 | 130 | 180 | 140 | 110 | 220 | 170 | 130 | 140 | 110 | 85 | 155 | 120 | 95 | |
M | 1 | 245 | 220 | 185 | 235 | 205 | 185 | 270 | 240 | 220 | 260 | 190 | 115 | 205 | 180 | 160 |
2 | 220 | 190 | 170 | 210 | 180 | 150 | 245 | 215 | 175 | 230 | 170 | 105 | 185 | 155 | 130 | |
3 | 175 | 155 | 140 | 155 | 140 | 110 | 185 | 160 | 125 | 190 | 140 | 80 | 140 | 120 | 95 | |
K | 1 | 355 | 320 | 290 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | 280 | 250 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | 235 | 210 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | |
N | 1 | – | – | – | – | – | – | – | – | – | 1075 | 945 | 945 | – | – | – |
2 | – | – | – | – | – | – | – | – | – | 945 | 875 | 845 | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | 875 | 760 | 760 | – | – | – | |
S | 1 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 62 | 45 | 27 | 40 | 35 | 30 |
2 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 55 | 40 | 26 | 40 | 35 | 30 | |
3 | – | – | – | 60 | 50 | 35 | 65 | 55 | 35 | 64 | 46 | 29 | 55 | 40 | 30 | |
4 | 80 | 60 | 40 | 80 | 60 | 40 | 100 | 70 | 50 | 90 | 66 | 42 | 70 | 55 | 35 | |
H | 1 | – | – | – | – | – | – | 160 | 120 | 90 | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Recommended Starting Speeds [SFM]
Material Group | WK15CM | WN25PM | WP20CM | WP25PM | WP35CM | WP40PM | WS30PM | WU35PM | |||||||||||||||||
P | 1 | – | – | – | – | – | – | 2165 | 1910 | 1770 | 1295 | 1120 | 1060 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 | 1460 | 1260 | 1180 | 1025 | 905 | 845 |
2 | – | – | – | – | – | – | 1340 | 1220 | 1080 | 1080 | 940 | 785 | 1105 | 1000 | 905 | 985 | 845 | 710 | 1200 | 1060 | 865 | 865 | 750 | 630 | |
3 | – | – | – | – | – | – | 1220 | 1080 | 1000 | 1000 | 845 | 690 | 1000 | 905 | 805 | 905 | 770 | 630 | 1120 | 940 | 770 | 785 | 670 | 550 | |
4 | – | – | – | – | – | – | 905 | 845 | 750 | 890 | 725 | 590 | 750 | 690 | 630 | 805 | 670 | 535 | 985 | 805 | 650 | 710 | 590 | 475 | |
5 | – | – | – | – | – | – | 1080 | 985 | 905 | 725 | 670 | 590 | 1025 | 905 | 830 | 670 | 610 | 535 | 805 | 750 | 650 | 590 | 535 | 475 | |
6 | – | – | – | – | – | – | 750 | 670 | 570 | 650 | 490 | 395 | 630 | 535 | 430 | 590 | 450 | 355 | 725 | 550 | 430 | 510 | 395 | 310 | |
M | 1 | – | – | – | – | – | – | 890 | 785 | 690 | 805 | 710 | 650 | 805 | 725 | 610 | 770 | 670 | 610 | 890 | 785 | 725 | 670 | 590 | 535 |
2 | – | – | – | – | – | – | 805 | 690 | 630 | 725 | 630 | 510 | 725 | 630 | 550 | 690 | 590 | 490 | 805 | 710 | 570 | 610 | 510 | 430 | |
3 | – | – | – | – | – | – | 630 | 570 | 490 | 550 | 475 | 370 | 570 | 510 | 450 | 510 | 450 | 355 | 610 | 535 | 415 | 450 | 395 | 310 | |
K | 1 | 1655 | 1520 | 1340 | – | – | – | 1415 | 1280 | 1165 | 905 | 805 | 725 | 1165 | 1045 | 940 | – | – | – | – | – | – | – | – | – |
2 | 1320 | 1165 | 1080 | – | – | – | 1120 | 1000 | 925 | 710 | 630 | 590 | 925 | 830 | 750 | – | – | – | – | – | – | – | – | – | |
3 | 1105 | 985 | 905 | – | – | – | 940 | 845 | 785 | 590 | 535 | 475 | 770 | 690 | 630 | – | – | – | – | – | – | – | – | – | |
N | 1 | – | – | – | 4230 | 3720 | 3445 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | 3720 | 3445 | 2995 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | 3720 | 3445 | 2995 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | – | – | – | 155 | 140 | 95 | – | – | – | 155 | 140 | 120 | 180 | 155 | 120 | 140 | 120 | 95 |
2 | – | – | – | – | – | – | – | – | – | 155 | 140 | 95 | – | – | – | 155 | 140 | 120 | 180 | 155 | 120 | 140 | 120 | 95 | |
3 | – | – | – | – | – | – | – | – | – | 200 | 155 | 95 | – | – | – | 200 | 155 | 120 | 215 | 180 | 120 | 180 | 140 | 95 | |
4 | – | – | – | – | – | – | – | – | – | 275 | 200 | 140 | 260 | 200 | 130 | 260 | 200 | 140 | 335 | 235 | 155 | 235 | 180 | 120 | |
H | 1 | – | – | – | – | – | – | 550 | 450 | 370 | 475 | 355 | 275 | – | – | – | – | – | – | 535 | 395 | 295 | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use