Downloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 3959623 |
| Ref. ISO Catalogue | RDPX12T3M0SNMM |
| Ref. ANSI Catalogue | RDPX12T3M0SNMM |
| Nuance | TN6540 |
| Arêtes de coupe par plaquette | 1 |
| [D] Taille de plaquette CI | 12 mm |
| [D] Taille de plaquette CI | .472 in |
| [S] Épaisseur de la plaquette | 3.97 mm |
| [S] Épaisseur de la plaquette | .1563 in |
| Épaisseur moyenne du copeau [HM] | 0.13 mm |
| Épaisseur moyenne du copeau [HM] | .005 in |
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | MM | TN6525 | MM | TN6525 | MM | TN6540 |
| P3–P4 | MH | TN2505 | MH | TN6525 | MH | TN6540 |
| P5–P6 | MH | TN2505 | MH | TN6525 | MH | TN6540 |
| M1–M2 | – | – | MM | TN6525 | MM | TN6540 |
| M3 | – | – | MM | TN6525 | MM | TN6540 |
| K1–K2 | MH | TN2505 | MH | TN2505 | MH | TN6525 |
| K3 | MH | TN2505 | MH | TN2505 | MH | TN6525 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | MM | TN6540 | – | – |
| S3 | – | – | MM | TN6540 | – | – |
| S4 | – | – | MM | TN6540 | – | – |
| H1 | MH | TN2505 | MH | TN2505 | – | – |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,33 | 0,48 | 0,76 | 0,24 | 0,35 | 0,54 | 0,18 | 0,26 | 0,41 | 0,16 | 0,23 | 0,35 | 0,14 | 0,21 | 0,33 | MM |
| MH | 0,35 | 0,70 | 1,17 | 0,25 | 0,50 | 0,84 | 0,19 | 0,38 | 0,63 | 0,16 | 0,33 | 0,55 | 0,15 | 0,30 | 0,50 | MH |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,38 | 0,56 | 0,88 | 0,28 | 0,40 | 0,63 | 0,21 | 0,30 | 0,47 | 0,18 | 0,26 | 0,41 | 0,17 | 0,24 | 0,38 | MM |
| MH | 0,40 | 0,81 | 1,36 | 0,29 | 0,58 | 0,97 | 0,22 | 0,43 | 0,72 | 0,19 | 0,38 | 0,63 | 0,17 | 0,35 | 0,58 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,60 | 0,88 | 1,38 | 0,43 | 0,63 | 0,99 | 0,32 | 0,47 | 0,74 | 0,28 | 0,41 | 0,64 | 0,26 | 0,38 | 0,59 | MM |
| MH | 0,63 | 1,28 | 2,16 | 0,45 | 0,91 | 1,53 | 0,34 | 0,68 | 1,14 | 0,30 | 0,59 | 0,99 | 0,27 | 0,54 | 0,90 | MH |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| MM | 0,44 | 0,65 | 1,02 | 0,32 | 0,47 | 0,73 | 0,24 | 0,35 | 0,55 | 0,21 | 0,30 | 0,48 | 0,19 | 0,28 | 0,44 | MM |
| MH | 0,47 | 0,94 | 1,59 | 0,34 | 0,68 | 1,13 | 0,25 | 0,50 | 0,84 | 0,22 | 0,44 | 0,73 | 0,20 | 0,40 | 0,67 | MH |
| Material Group | TN2505 | TN6525 | TN6540 | |||||||
| P | 1 | 550 | 420 | 360 | 410 | 320 | 280 | 360 | 280 | 240 |
| 2 | 320 | 240 | 205 | 320 | 250 | 215 | 250 | 190 | 170 | |
| 3 | 320 | 240 | 205 | 280 | 215 | 185 | 215 | 170 | 140 | |
| 4 | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | |
| 5 | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | |
| 6 | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | |
| M | 1 | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 |
| 2 | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | |
| 3 | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | |
| K | 1 | 400 | 300 | 250 | 275 | 245 | 220 | 220 | 205 | 180 |
| 2 | 540 | 365 | 280 | 215 | 190 | 180 | 175 | 155 | 140 | |
| 3 | 310 | 190 | 155 | 180 | 160 | 145 | 155 | 145 | 125 | |
| N | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 50 | 35 | 30 |
| 2 | – | – | – | – | – | – | 25 | 20 | 10 | |
| 3 | – | – | – | – | – | – | 70 | 40 | 30 | |
| 4 | – | – | – | – | – | – | 60 | 30 | 25 | |
| H | 1 | 175 | 140 | 95 | – | – | – | – | – | – |
| 2 | 175 | 140 | 95 | – | – | – | – | – | – | |
| 3 | 140 | 115 | 80 | – | – | – | – | – | – | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?