P-Clamping
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (24)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(24)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(24)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(24)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(24)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(24)
- M Stainless Steel (24)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(24)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(24)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(24)
- K Cast Iron (24)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(24)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(24)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(24)
- N Non-Ferrous Materials (24)
- N1Wrought Aluminum (24)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(24)
- N3High-Silicon Aluminum Alloys Si >12.2%(16)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (24)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (24)
- N6Carbon, Graphite Composites, CFRP (24)
- N7MMC's (22)
- S High-Temp Alloys (24)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(24)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(24)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(24)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(24)
- H Hardened Materials (24)
- H1Hardened Materials 44-48 HRC(24)
- H2Hardened Materials 48-55 HRC(24)
- H3Hardened Materials 56-60 HRC(22)
- H4Hardened Materials >60 HRC(22)
- C CFRP Materials (24)
- C1CFRP, CFRP / CFRP (24)
- C2CFRP / Aluminium CFRP / Non-Ferrous (22)
Applications
Applications
Facing (16)
ID Facing (16)
Multiple Direction Cutting (16)
Profiling (16)
TRN Boring (24)
Turning (24)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (24)
- Lightly Interrupted Cut (24)
- Smooth Cut (24)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (8)
- 95.0 (16)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (22)
- 2.0 (16)
- 3.0 (8)
- 4.0 (16)
- 6.0 (8)
- 8.0 (8)
to
Over All Length [L]
Over All Length [L]
- 4.921 in(6)
- 5.513 in(12)
- 6.694 in(6)
to
Over All Length [L]
Over All Length [L]
- 125.0 mm(6)
- 140.0 mm(12)
- 170.0 mm(6)
to
Corner Radius
Corner Radius
- 0.004 in(22)
- 0.008 in(18)
- 0.014 in(6)
- 0.016 in(24)
- 0.024 in(8)
- 0.031 in(24)
- 0.047 in(24)
- 0.063 in(22)
to
Corner Radius
Corner Radius
- 0.1 mm(22)
- 0.2 mm(18)
- 0.351 mm(6)
- 0.4 mm(24)
- 0.601 mm(8)
- 0.8 mm(24)
- 1.201 mm(24)
- 1.6 mm(22)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (14)
- CW5025 (22)
- K060 (8)
- K313 (22)
- K68 (14)
- KB1340 (10)
- KB1345 (8)
- KB1610 (16)
- KB1630 (8)
- KB5610 (8)
- KB5630 (8)
- KBH10 (22)
- KBH10B (14)
- KBH20 (22)
- KBH20B (14)
- KBK35 (8)
- KC5010 (24)
- KC5025 (24)
- KC5410 (22)
- KC730 (16)
- KC850 (22)
- KC9125 (8)
- KCK05 (24)
- KCK05B (16)
- KCK15 (24)
- KCK15B (24)
- KCK20 (24)
- KCK20B (24)
- KCM15 (24)
- KCM15B (24)
- KCM25 (24)
- KCM25B (24)
- KCM35 (22)
- KCM35B (22)
- KCP05 (24)
- KCP05B (24)
- KCP10 (24)
- KCP10B (24)
- KCP25 (24)
- KCP25B (24)
- KCP25C (24)
- KCP30 (24)
- KCP30B (16)
- KCP40 (22)
- KCP40B (22)
- KCPK05 (24)
- KCS10 (8)
- KCS10B (24)
- KCU10 (24)
- KCU10B (24)
- KCU25 (24)
- KCU25B (24)
- KD1400 (8)
- KD1405 (8)
- KD1425 (16)
- KS15 (8)
- KT315 (24)
- KT325 (8)
- KTP10 (24)
- KTP25S (22)
- KY1540 (8)
- KY3500 (22)
- KY4300 (8)
- KY4400 (22)
- KYHK15B (22)
- KYK10 (8)
- KYK25 (16)
- KYS25 (8)
- KYS30 (16)
- PB100 (8)
- THM (8)
- THM-X (14)
- THMF-X (8)
- TN10P (22)
- TN10U (22)
- TN15M (22)
- TN15U (8)
- TN2000 (22)
- TN20K (22)
- TN20P (24)
- TN30M (22)
- TN30P (22)
- TN4000 (22)
- TN6010 (14)
- TTS (8)
- WBH10P (8)
- WBH10U (8)
- WBH20P (22)
- WBH30P (8)
- WDN00U (8)
- WDN25U (16)
- WK05CT (24)
- WK15CT (22)
- WK20CT (24)
- WM15CT (24)
- WM25CT (24)
- WM35CT (24)
- WP05CT (16)
- WP15CT (24)
- WP25CT (24)
- WP35CT (22)
- WS10PT (24)
- WS25PT (24)
- WU10HT (24)
- WU10PT (24)
- WU25PT (24)
- X00580 (8)
- X00581 (8)
- X00582 (8)
- X00583 (8)
- X00584 (8)
- X00585 (8)
- X00586 (8)
- X00591 (8)
- X00592 (8)
- X00593 (8)
- X00594 (8)
- X00596 (8)
- X00597 (8)
- X00599 (8)
Hand Of Tool
Hand Of Tool
- L (12)
- R (12)
Wiper Insert
Wiper Insert
- N (24)
- Y (24)
F Dimension
F Dimension
- 17.0 mm(6)
- 22.0 mm(6)
- 27.0 mm(6)
- 35.0 mm(6)
to
F Dimension
F Dimension
- 0.669 in(6)
- 0.866 in(6)
- 1.063 in(6)
- 1.379 in(6)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(6)
- 40.0 mm(6)
- 50.0 mm(6)
- 63.0 mm(6)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.26 in(6)
- 1.575 in(6)
- 1.969 in(6)
- 2.48 in(6)
to
Cutting Direction
Cutting Direction
- B (16)
- E (8)
Maximum Bore Depth
Maximum Bore Depth
- 3.477 in(6)
- 4.42 in(6)
- 4.485 in(3)
- 4.49 in(3)
- 5.671 in(6)
to
Maximum Bore Depth
Maximum Bore Depth
- 88.325 mm(6)
- 112.275 mm(6)
- 113.926 mm(3)
- 114.051 mm(3)
- 144.05 mm(6)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (8)
- D-DIAMOND/RHOMBIC 55 (8)
- W-TRIGON 80 (8)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (18)
- B L (22)
- C A (22)
- C N (22)
- D P (22)
- H T (24)
- H W (24)
No filters matching ""
