Rainurage : fraisage de côté
Fraisage — Arrosage interne
Queue — Cylindrique Weldon 2 à bout plat
Rainurage : en TDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 2021382 |
| Ref. ISO Catalogue | 12391603400 |
| Ref. ANSI Catalogue | 12391603400 |
| Nuance | W |
| [D1] Diamètre effectif de coupe | 39.875 mm |
| [D1] Diamètre effectif de coupe | 1.57 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 25 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .9843 in |
| [D3] Diamètre de la partie cylindrique du corps | 19 mm |
| [D3] Diamètre de la partie cylindrique du corps | .748 in |
| [L] Longueur totale | 105 mm |
| [L] Longueur totale | 4.134 in |
| [L3] Longueur exploitable | 49 mm |
| [L3] Longueur exploitable | 1.929 in |
| [AP1MAX] 1re profondeur de coupe maximale | 17.85 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .703 in |
| Nombre de plaquettes | 4 |
| [Z] Nombre de goujures | 2 |
| Plaquette étalon | CPNT09T308T |
| Alimentation en arrosage | Y |
| Poids en kilogrammes | 0.36 |
Rainurage : fraisage de côtéFraisage — Arrosage interneQueue — Cylindrique Weldon 2 à bout platRainurage : en TCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Material Group | Light | General | Heavy | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | CPNT | WP40PM | CPNT | WP40PM | CPNT | WP40PM |
| P3–P4 | CPNT | WP35CM | CPNT | WP35CM | CPNT | WP35CM |
| P5–P6 | CPNT | WP35CM | CPNT | WP40PM | CPNT | WP40PM |
| M1–M2 | CPNT | WP40PM | CPNT | WP40PM | CPNT | WP40PM |
| M3 | CPNT | TN7535 | CPNT | WP35CM | CPNT | WP35CM |
| K1–K2 | CPNT | WK15CM | CPNT | WK15CM | CPNT | WK15CM |
| K3 | CPNT | WK15CM | CPNT | WP35CM | CPNT | WP35CM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
| CPNT06 | 0,12 | 0,29 | 0,46 | 0,09 | 0,21 | 0,33 | 0,07 | 0,16 | 0,25 | 0,06 | 0,14 | 0,22 | 0,05 | 0,13 | 0,20 | CPNT06 |
| CPNT08 | 0,12 | 0,29 | 0,46 | 0,09 | 0,21 | 0,33 | 0,07 | 0,16 | 0,25 | 0,06 | 0,14 | 0,22 | 0,05 | 0,13 | 0,20 | CPNT08 |
| CPNT09 | 0,12 | 0,29 | 0,46 | 0,08 | 0,21 | 0,33 | 0,06 | 0,16 | 0,25 | 0,06 | 0,14 | 0,22 | 0,05 | 0,13 | 0,20 | CPNT09 |
| CPNT12 | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,32 | 0,06 | 0,16 | 0,28 | 0,05 | 0,15 | 0,25 | CPNT12 |
| Light | General | Heavy |
| Material Group | THM | TTM08 | WK15CM | WP35CM | WP40PM | |||||||||||
| P | 0 | – | – | – | – | – | – | – | – | – | 455 | 395 | 370 | 295 | 260 | 245 |
| 1 | – | – | – | 230 | 200 | 190 | – | – | – | 455 | 395 | 370 | 295 | 260 | 245 | |
| 2 | – | – | – | 195 | 170 | 140 | – | – | – | 280 | 255 | 230 | 250 | 215 | 180 | |
| 3 | – | – | – | 180 | 150 | 125 | – | – | – | 255 | 230 | 205 | 230 | 195 | 160 | |
| 4 | – | – | – | 160 | 130 | 105 | – | – | – | 190 | 175 | 160 | 205 | 170 | 135 | |
| 5 | – | – | – | – | – | – | – | – | – | 260 | 230 | 210 | 170 | 155 | 135 | |
| 6 | – | – | – | – | – | – | – | – | – | 160 | 135 | 110 | 150 | 115 | 90 | |
| M | 1 | – | – | – | – | – | – | – | – | – | 205 | 185 | 155 | 195 | 170 | 155 |
| 2 | – | – | – | – | – | – | – | – | – | 185 | 160 | 140 | 175 | 150 | 125 | |
| 3 | – | – | – | – | – | – | – | – | – | 145 | 130 | 115 | 130 | 115 | 90 | |
| K | 1 | 120 | 90 | 75 | – | – | – | 420 | 385 | 340 | 295 | 265 | 240 | – | – | – |
| 2 | 125 | 100 | 70 | – | – | – | 335 | 295 | 275 | 235 | 210 | 190 | – | – | – | |
| 3 | 130 | 95 | 60 | – | – | – | 280 | 250 | 230 | 195 | 175 | 160 | – | – | – | |
| N | 1 | 900 | 600 | 500 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 685 | 465 | 385 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 450 | 280 | 200 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 35 | 30 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 35 | 30 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 | |
| 4 | – | – | – | – | – | – | – | – | – | 66 | 50 | 33 | 65 | 50 | 35 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?