Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

WIDIA ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho
Selecionar filtros
Filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (10)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(10)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(10)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(10)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(10)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(10)
    • M Stainless Steel (10)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(10)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(10)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(10)
    • K Cast Iron (10)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(10)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(10)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(10)
    • N Non-Ferrous Materials (10)
      • N1
        Wrought Aluminum (10)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(10)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(10)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (10)
      • N6
        Carbon, Graphite Composites, CFRP (10)
      • N7
        MMC's (10)
    • S High-Temp Alloys (10)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(10)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(10)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(10)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(10)
    • H Hardened Materials (10)
      • H1
        Hardened Materials 44-48 HRC(10)
      • H2
        Hardened Materials 48-55 HRC(10)
      • H3
        Hardened Materials 56-60 HRC(10)
      • H4
        Hardened Materials >60 HRC(10)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (8)
    • Cut-OffCut-Off (8)
    • Deep GroovingDeep Grooving (8)
    • Face GroovingFace Grooving (8)
    • FacingFacing (8)
    • GroovingGrooving (10)
    • ID Thread TurningID Thread Turning (2)
    • Multiple Direction CuttingMultiple Direction Cutting (8)
    • OD Thread TurningOD Thread Turning (10)
    • Plunge TurningPlunge Turning (8)
    • ProfilingProfiling (8)
    • ThreadingThreading (8)
    • TurningTurning (8)
    Type of Thread
    Type of Thread
    • 60 (10)
    • ACME (2)
    • API (2)
    • API RD (2)
    • BSW (2)
    • BUTTRESS (10)
    • M (6)
    • NPT (2)
    • STUB ACME (2)
    • UN (10)
    • UNJ (2)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (10)
    • Lightly Interrupted Cut (10)
    • Smooth Cut (10)
    • Varying Depth of Cut (10)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (10)
    • 2.0 (10)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.787 in(8)
    • 1.181 in(2)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 20.0 mm(8)
    • 30.0 mm(2)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.002 in(2)
    • 0.003 in(10)
    • 0.004 in(10)
    • 0.005 in(2)
    • 0.006 in(2)
    • 0.007 in(6)
    • 0.008 in(10)
    • 0.01 in(6)
    • 0.011 in(2)
    • 0.012 in(2)
    • 0.014 in(2)
    • 0.016 in(2)
    • 0.019 in(2)
    • 0.02 in(10)
    • 0.023 in(2)
    • 0.03 in(8)
    • 0.031 in(10)
    • 0.035 in(2)
    • 0.039 in(10)
    • 0.047 in(10)
    • 0.049 in(10)
    • 0.06 in(10)
    • 0.062 in(2)
    • 0.063 in(10)
    • 0.069 in(10)
    • 0.078 in(2)
    • 0.079 in(2)
    • 0.089 in(2)
    • 0.095 in(2)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(2)
    • 0.076 mm(10)
    • 0.1 mm(10)
    • 0.125 mm(2)
    • 0.151 mm(2)
    • 0.176 mm(6)
    • 0.2 mm(10)
    • 0.225 mm(2)
    • 0.25 mm(6)
    • 0.275 mm(2)
    • 0.301 mm(2)
    • 0.325 mm(2)
    • 0.351 mm(2)
    • 0.4 mm(2)
    • 0.45 mm(2)
    • 0.476 mm(1)
    • 0.5 mm(10)
    • 0.576 mm(2)
    • 0.75 mm(8)
    • 0.775 mm(10)
    • 0.9 mm(2)
    • 1.0 mm(10)
    • 1.201 mm(10)
    • 1.25 mm(10)
    • 1.5 mm(10)
    • 1.576 mm(2)
    • 1.6 mm(10)
    • 1.75 mm(10)
    • 1.975 mm(2)
    • 2.0 mm(2)
    • 2.25 mm(2)
    • 2.401 mm(2)
    Corner Radius MinaCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K2885 (10)
    • K313 (10)
    • K420 (10)
    • K4H (6)
    • K68 (10)
    • KB1345 (2)
    • KB1630 (2)
    • KB5625 (2)
    • KBH20 (1)
    • KC250 (10)
    • KC5010 (10)
    • KC5025 (10)
    • KC5410 (10)
    • KC710 (10)
    • KC720 (10)
    • KC722 (10)
    • KC730 (10)
    • KC732 (2)
    • KC810 (10)
    • KC850 (10)
    • KC910 (6)
    • KC9110 (10)
    • KC9120 (2)
    • KC9320 (10)
    • KC935 (10)
    • KC950 (10)
    • KCK20 (6)
    • KCK20B (10)
    • KCP10B (10)
    • KCP25B (10)
    • KCU10 (10)
    • KCU10B (10)
    • KCU25 (10)
    • KCU25B (10)
    • KD050 (1)
    • KD081 (2)
    • KD100 (2)
    • KD120 (2)
    • KD1425 (2)
    • KT175 (10)
    • KT315 (10)
    • KU10T (10)
    • KU25T (10)
    • KU30T (10)
    • KY3000 (2)
    • THM (10)
    • TN10P (6)
    • TN6010 (10)
    • TN6025 (10)
    • TN7110 (10)
    • WU10HT (1)
    • WU10PT (4)
    • WU25PT (1)
    Hand Of Tool
    Hand Of Tool
    • L (5)
    • R (5)
    F Dimension
    F Dimension
    • 8.0 mm(2)
    • 10.0 mm(8)
    F Dimension MinaF Dimension Max
    F Dimension
    F Dimension
    • 0.315 in(2)
    • 0.394 in(8)
    F Dimension MinaF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(10)
    • 41.301 mm(2)
    • 47.6 mm(2)
    • 56.625 mm(8)
    • 88.9 mm(10)
    • 139.701 mm(2)
    • 174.601 mm(2)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(10)
    • 1.627 in(2)
    • 1.874 in(2)
    • 2.229 in(8)
    • 3.5 in(10)
    • 5.5 in(2)
    • 6.875 in(2)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (8)
    • S (2)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.02 in(8)
    • 0.031 in(8)
    • 0.035 in(8)
    • 0.039 in(10)
    • 0.041 in(8)
    • 0.047 in(10)
    • 0.055 in(8)
    • 0.058 in(8)
    • 0.06 in(10)
    • 0.062 in(10)
    • 0.067 in(8)
    • 0.069 in(10)
    • 0.073 in(2)
    • 0.077 in(8)
    • 0.078 in(2)
    • 0.079 in(10)
    • 0.088 in(10)
    • 0.089 in(9)
    • 0.094 in(1)
    • 0.095 in(10)
    • 0.097 in(2)
    • 0.098 in(10)
    • 0.105 in(2)
    • 0.108 in(10)
    • 0.11 in(2)
    • 0.119 in(10)
    • 0.122 in(2)
    • 0.125 in(10)
    • 0.126 in(10)
    • 0.128 in(10)
    • 0.129 in(8)
    • 0.131 in(1)
    • 0.138 in(10)
    • 0.143 in(2)
    • 0.147 in(4)
    • 0.15 in(4)
    • 0.151 in(4)
    • 0.152 in(8)
    • 0.156 in(2)
    • 0.157 in(2)
    • 0.167 in(2)
    • 0.169 in(2)
    • 0.177 in(2)
    • 0.178 in(2)
    • 0.185 in(2)
    • 0.188 in(2)
    • 0.189 in(2)
    • 0.192 in(1)
    • 0.193 in(1)
    • 0.195 in(2)
    • 0.196 in(2)
    Cutting Width MinaCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(8)
    • 0.775 mm(8)
    • 0.8 mm(8)
    • 0.9 mm(8)
    • 1.0 mm(10)
    • 1.05 mm(8)
    • 1.201 mm(10)
    • 1.401 mm(8)
    • 1.475 mm(8)
    • 1.5 mm(10)
    • 1.576 mm(10)
    • 1.701 mm(8)
    • 1.75 mm(10)
    • 1.826 mm(2)
    • 1.951 mm(8)
    • 1.975 mm(2)
    • 2.0 mm(10)
    • 2.2 mm(10)
    • 2.225 mm(10)
    • 2.25 mm(9)
    • 2.375 mm(1)
    • 2.401 mm(10)
    • 2.475 mm(2)
    • 2.5 mm(10)
    • 2.676 mm(2)
    • 2.75 mm(10)
    • 2.801 mm(2)
    • 3.0 mm(10)
    • 3.1 mm(2)
    • 3.176 mm(10)
    • 3.2 mm(10)
    • 3.25 mm(10)
    • 3.276 mm(8)
    • 3.325 mm(1)
    • 3.5 mm(10)
    • 3.6 mm(2)
    • 3.725 mm(4)
    • 3.801 mm(4)
    • 3.825 mm(4)
    • 3.85 mm(8)
    • 3.95 mm(2)
    • 3.975 mm(1)
    • 4.0 mm(2)
    • 4.25 mm(2)
    • 4.3 mm(2)
    • 4.5 mm(2)
    • 4.525 mm(2)
    • 4.7 mm(2)
    • 4.775 mm(2)
    • 4.801 mm(2)
    • 4.875 mm(1)
    • 4.9 mm(1)
    • 4.95 mm(2)
    • 4.976 mm(2)
    Cutting Width MinaCutting Width Max
    Insert Size
    Insert Size
    • 2 (8)
    • 3 (2)
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (2)
    • B L (2)
    • C N (2)
    • D P (2)
    • H T (10)
    • H W (10)
    backEnd
    System Size
    System Size
    • KM12 (2)
    • KM16 (8)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(2)
    • 16.0 mm(8)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(2)
    • 0.63 in(8)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    NS • Aplicação de unidades de corte OD KM Micro™
    (6)

    NS • Aplicação de unidades de corte OD KM Micro™

    NE • Aplicação de unidades de corte OD KM Micro™
    (2)

    NE • Aplicação de unidades de corte OD KM Micro™

    NS-HPC • Aplicação de unidades de corte OD KM Micro™
    (2)

    NS-HPC • Aplicação de unidades de corte OD KM Micro™

    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Digite um nome válido
    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberCódigo de catálogo ISOClasse  

    You are about to leave the Solution building process.

    Are you sure you want to leave?