VSM890-12 Series - Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (9)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(9)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(9)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(9)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(9)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(9)
- M Stainless Steel (9)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(9)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(9)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(9)
- K Cast Iron (7)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(7)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(7)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(7)
- N Non-Ferrous Materials (4)
- N1Wrought Aluminum (4)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(4)
- N3High-Silicon Aluminum Alloys Si >12.2%(4)
- S High-Temp Alloys (9)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(8)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(8)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(8)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(9)
- H Hardened Materials (4)
- H1Hardened Materials 44-48 HRC(4)
Select All Star
- CN (8)
- DE (8)
- GB (6)
- IN (4)
- SG (8)
- US (10)
Corner Radius
Corner Radius
- 0.031 in(10)
- 0.063 in(4)
to
Corner Radius
Corner Radius
- 0.8 mm(10)
- 1.6 mm(4)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- WK15CM (2)
- WK20PM (1)
- WN25PM (1)
- WP25PM (3)
- WP35CM (1)
- WP40PM (2)
- WS40PM (3)
- WU10PM (1)
Insert Geometry
Chip Breaker CBMD
Chip Breaker CBMD
- ALP (1)
- ML (2)
- MM (11)
No filters matching ""
