Trochoidal Milling
Schräg-Eintauchfräsen Ins Volle
Nutenfräsen: Ebene Stirnfläche
Umfangfräsen/Schulterfräsen: Ebene Stirnfläche
Werkzeugabmessungen: Schneidreihen: 4 
Corner Style: Corner Chamfer
Schneideckenausführung: Eckenradius
Schneideckenausführung: Ebene Stirnfläche
Zylinderschaft – ohne Spannfläche
Zylinderschaft – Weldon
Spiralwinkel: 38°
TauchfräsenDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Nummer | 5576532 |
| ISO Katalog Nummer | 4V0505000BT |
| ANSI Katalog Nummer | 4V0505000BT |
| Sorte | WP15PE |
| Aufnahmeart Maschinenseite | Straight-Cylindrical |
| [Re] Eckenradius | 0.762 mm |
| [Re] Eckenradius | 0.03 in |
| [Z] Anzahl der Spannuten | 4 |
| [D1] Effektiver Schneidendurchmesser | 4.763 mm |
| [D1] Effektiver Schneidendurchmesser | 0.1875 in |
| [D] Adapter/Schaft/Bohrungsdurchmesser | 4.763 mm |
| [D] Adapter/Schaft/Bohrungsdurchmesser | 0.1875 in |
| [AP1MAX] 1. maximale Schnitttiefe | 15.875 mm |
| [AP1MAX] 1. maximale Schnitttiefe | 0.625 in |
| [L] Gesamtlänge | 57.15 mm |
| [L] Gesamtlänge | 2.25 in |
Trochoidal MillingSchräg-Eintauchfräsen Ins VolleNutenfräsen: Ebene StirnflächeUmfangfräsen/Schulterfräsen: Ebene StirnflächeWerkzeugabmessungen: Schneidreihen: 4 Corner Style: Corner ChamferSchneideckenausführung: EckenradiusSchneideckenausführung: Ebene StirnflächeZylinderschaft – ohne SpannflächeZylinderschaft – WeldonSpiralwinkel: 38°TauchfräsenGrades
WP15PE
Hartmetallschneidstoff mit einer dicken, prozessoptimierten PVD-Beschichtung mit einer höheren Verschleißfestigkeit Überragender Schutz vor Kolk-, Kerb- und Freiflächenverschleiß bei der Bearbeitung von nicht rostendem Stahl. Ausgezeichnete Leistung bei Härten von bis zu 52 HRC.
 |  |  | |||||||||||||||||
| Eckfräsen (A) und Nutfräsen (B) | WP15PE | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | |||||||||||||||||
| A | B | Schnittgeschwindigkeit | D1 | ||||||||||||||||
| frac. | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | ||||||||
| Werkstoffgruppe | ap | ae | ap | Min. | Max. | dec. | .1250 | .1875 | .2500 | .3125 | .3750 | .4375 | .5000 | .6250 | .7500 | 1.0000 | 1.2500 | ||
| P | 0 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 | .0049 |
| 1 | 1.5 x D | 0.5 x D | 1 x D | 490 | – | 660 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 | .0049 | |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 460 | – | 620 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 | .0049 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 520 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 | .0048 | |
| 4 | 1.5 x D | 0.5 x D | 0.75 x D | 300 | – | 490 | IPT | .0007 | .0010 | .0014 | .0017 | .0020 | .0023 | .0026 | .0030 | .0034 | .0039 | .0040 | |
| 5 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 330 | IPT | .0006 | .0009 | .0012 | .0016 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 | .0039 | |
| 6 | 1.5 x D | 0.5 x D | 0.75 x D | 160 | – | 250 | IPT | .0005 | .0008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 | .0029 | |
| M | 1 | 1.5 x D | 0.5 x D | 1 x D | 300 | – | 380 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 | .0048 |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 260 | IPT | .0006 | .0009 | .0012 | .0016 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 | .0039 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 200 | – | 230 | IPT | .0005 | .0008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 | .0029 | |
| K | 1 | 1.5 x D | 0.5 x D | 1 x D | 390 | – | 490 | IPT | .0009 | .0013 | .0018 | .0023 | .0027 | .0031 | .0034 | .0039 | .0044 | .0049 | .0049 |
| 2 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 460 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 | .0048 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 360 | – | 430 | IPT | .0006 | .0009 | .0012 | .0016 | .0018 | .0021 | .0023 | .0027 | .0031 | .0036 | .0039 | |
| S | 1 | 1.5 x D | 0.3 x D | 0.3 x D | 160 | – | 300 | IPT | .0007 | .0011 | .0015 | .0020 | .0023 | .0026 | .0029 | .0034 | .0039 | .0045 | .0048 |
| 2 | 1.5 x D | 0.3 x D | 0.3 x D | 80 | – | 130 | IPT | .0004 | .0006 | .0008 | .0010 | .0012 | .0014 | .0015 | .0018 | .0021 | .0024 | .0026 | |
| 3 | 1.5 x D | 0.5 x D | 1 x D | 80 | – | 130 | IPT | .0004 | .0006 | .0008 | .0010 | .0012 | .0014 | .0015 | .0018 | .0021 | .0024 | .0026 | |
| 4 | 1.5 x D | 0.5 x D | 1 x D | 160 | – | 200 | IPT | .0005 | .0008 | .0011 | .0014 | .0017 | .0019 | .0021 | .0025 | .0028 | .0033 | .0036 | |
| H | 1 | 1.5 x D | 0.5 x D | 0.75 x D | 260 | – | 460 | IPT | .0007 | .0010 | .0014 | .0017 | .0020 | .0023 | .0026 | .0030 | .0034 | .0039 | .0040 |
| 2 | 1.5 D | 0.2 x D | 0.5 x D | 230 | – | 460 | IPT | .0005 | .0008 | .0010 | .0013 | .0015 | .0017 | .0019 | .0022 | .0025 | .0028 | .0029 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO Katalog
ANSI Katalog
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Katalog | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?