36310
Face Milling
Slotting: Square End
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Through Coolant
Milling - Side and Face
PocketingDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 6009966 |
| ISO Catalog ID | M200D500Z08S150RN64 |
| ANSI Catalog ID | M200D500Z08S150RN64 |
| [D1MAX] Maximum Cutting Diameter | 127 mm |
| [D1MAX] Maximum Cutting Diameter | 5 in |
| [D1] Effective Cutting Diameter | 107.9 mm |
| [D1] Effective Cutting Diameter | 4.25 in |
| [D] Adapter / Shank / Bore Diameter | 38.11 mm |
| [D] Adapter / Shank / Bore Diameter | 1.5 in |
| [D6] Hub Diameter | 96.84 mm |
| [D6] Hub Diameter | 3.812 in |
| [L] Overall Length | 50.8 mm |
| [L] Overall Length | 2 in |
| [AP1MAX] 1st Maximum Cutting Depth | 9.5 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .37 in |
| Number of Inserts | 8 |
| Maximum Ramping Angle | 0.6 |
| Max RPM | 10000 |
| Coolant Supply | Y |
| Weight Pounds | 4.68 |
36310Face MillingSlotting: Square EndSide Milling/Shoulder Milling: Ball Nose3D ProfilingMilling - Through CoolantMilling - Side and FacePocketingCreate Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .003 | .009 | .016 | .003 | .007 | .012 | .002 | .006 | .010 | .002 | .006 | .010 | .002 | .005 | .009 | .E..ML |
| .S..MM | .007 | .015 | .027 | .005 | .011 | .020 | .005 | .010 | .017 | .004 | .009 | .016 | .004 | .009 | .016 | .S..MM |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .004 | .011 | .020 | .003 | .008 | .015 | .003 | .007 | .013 | .003 | .007 | .012 | .003 | .007 | .012 | .E..ML |
| .S..MM | .009 | .019 | .034 | .006 | .014 | .025 | .006 | .012 | .021 | .005 | .011 | .020 | .005 | .011 | .020 | .S..MM |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .008 | .021 | .037 | .006 | .016 | .027 | .005 | .014 | .023 | .005 | .013 | .022 | .005 | .012 | .021 | .E..ML |
| .S..MM | .016 | .035 | .065 | .012 | .025 | .046 | .010 | .022 | .040 | .010 | .020 | .037 | .009 | .020 | .036 | .S..MM |
| Light | General | Heavy |
| Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | ||||||||||||||||
| Insert Geometry | 10% | 20% | 30% | 40% | 50–100% | Insert Geometry | ||||||||||
| .E..ML | .006 | .015 | .027 | .004 | .011 | .020 | .004 | .010 | .017 | .004 | .009 | .016 | .003 | .009 | .016 | .E..ML |
| .S..MM | .012 | .025 | .046 | .009 | .018 | .033 | .007 | .016 | .029 | .007 | .015 | .027 | .007 | .015 | .026 | .S..MM |
| Material Group | WK15CM | WP25PM | WU35PM | WP35CM | WP40PM | |||||||||||
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1025 | 905 | 845 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 |
| 2 | – | – | – | 1080 | 940 | 785 | 865 | 750 | 630 | 1105 | 1000 | 905 | 985 | 845 | 710 | |
| 3 | – | – | – | 1000 | 845 | 690 | 785 | 670 | 550 | 1000 | 905 | 805 | 905 | 770 | 630 | |
| 4 | – | – | – | 890 | 725 | 590 | 710 | 590 | 475 | 750 | 690 | 630 | 805 | 670 | 535 | |
| 5 | – | – | – | 725 | 670 | 590 | 590 | 535 | 475 | 1025 | 905 | 830 | 670 | 610 | 535 | |
| 6 | – | – | – | 650 | 490 | 395 | 510 | 395 | 310 | 630 | 535 | 430 | 590 | 450 | 355 | |
| M | 1 | – | – | – | 805 | 710 | 650 | 670 | 590 | 535 | 805 | 725 | 610 | 770 | 670 | 610 |
| 2 | – | – | – | 725 | 630 | 510 | 610 | 510 | 430 | 725 | 630 | 550 | 690 | 590 | 490 | |
| 3 | – | – | – | 550 | 475 | 370 | 450 | 395 | 310 | 570 | 510 | 450 | 510 | 450 | 355 | |
| K | 1 | 1655 | 1520 | 1340 | 905 | 805 | 725 | – | – | – | 1165 | 1045 | 940 | – | – | – |
| 2 | 1320 | 1165 | 1080 | 710 | 630 | 590 | – | – | – | 925 | 830 | 750 | – | – | – | |
| 3 | 1105 | 985 | 905 | 590 | 535 | 475 | – | – | – | 770 | 690 | 630 | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 |
| 2 | – | – | – | 155 | 140 | 95 | 140 | 120 | 95 | – | – | – | 155 | 140 | 120 | |
| 3 | – | – | – | 200 | 155 | 95 | 180 | 140 | 95 | – | – | – | 200 | 155 | 120 | |
| 4 | – | – | – | 275 | 200 | 140 | 235 | 180 | 120 | 260 | 200 | 130 | 260 | 200 | 140 | |
| H | 1 | – | – | – | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Light | General | Heavy | ||||
| Material | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P3–P4 | .E..ML | WP25PM | .S..MM | WP40PM | .S..MM | WP40PM |
| P5–P6 | .E..ML | WP25PM | .S..MM | WP35CM | .S..MM | WP35CM |
| M1–M2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| M3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| K1–K2 | – | – | .S..MM | WK15CM | – | – |
| K3 | – | – | .S..MM | WK15CM | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S3 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| S4 | .E..ML | WP25PM | .S..MM | WU35PM | .S..MM | WU35PM |
| H1 | – | – | .S..MM | WP25PM | – | – |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?