M270 Ball Nose - Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (27)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(16)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(16)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(16)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(16)
- M Stainless Steel (16)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(16)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(16)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(16)
- K Cast Iron (33)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(33)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(33)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(33)
- S High-Temp Alloys (12)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(12)
- H Hardened Materials (17)
- H1Hardened Materials 44-48 HRC(17)
- H2Hardened Materials 48-55 HRC(11)
- H3Hardened Materials 56-60 HRC(11)
Corner Radius
Corner Radius
- 0.187 in(1)
- 0.197 in(3)
- 0.237 in(5)
- 0.25 in(2)
- 0.313 in(1)
- 0.315 in(5)
- 0.375 in(3)
- 0.394 in(5)
- 0.492 in(3)
- 0.5 in(2)
- 0.63 in(3)
to
Corner Radius
Corner Radius
- 4.75 mm(1)
- 5.0 mm(3)
- 6.0 mm(5)
- 6.351 mm(2)
- 7.95 mm(1)
- 8.0 mm(5)
- 9.525 mm(3)
- 10.0 mm(5)
- 12.5 mm(3)
- 12.701 mm(2)
- 16.0 mm(3)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- TN2505 (11)
- TN6525 (4)
- TN6540 (4)
- WP35CM (8)
- WU10PM (6)
Front-End
Cutting Width
Cutting Width
- 0.375 in(1)
- 0.394 in(3)
- 0.473 in(5)
- 0.5 in(2)
- 0.625 in(1)
- 0.63 in(5)
- 0.75 in(3)
- 0.787 in(5)
- 0.984 in(3)
- 1.0 in(2)
- 1.26 in(3)
to
Cutting Width
Cutting Width
- 9.525 mm(1)
- 10.0 mm(3)
- 12.0 mm(5)
- 12.701 mm(2)
- 15.875 mm(1)
- 16.0 mm(5)
- 19.05 mm(3)
- 20.0 mm(5)
- 25.0 mm(3)
- 25.401 mm(2)
- 32.0 mm(3)
to
No filters matching ""
