Country

Language

Unit of Measure

Product Suggestions

Product Similar To: [Product Name]

Back To [Product] | Modify Similar To

Contact our sales team to discover your buying options

M100 • Weldon® End Mills • iC10 • Inch

Name: M100 • Weldon® End Mills • iC10 • Inch
SKU: 100007707
Rating: 0 (0 reviews)

Weldon® End Mills • Inch

Features and benefits

General purpose face and copy milling.

Uses and application

Face Milling
Helical Milling
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Ball Nose
3D Profiling
Milling - Through Coolant
Shank - Cylindrical Weldon 2 Flat
Pocketing

Insert Selection Guide

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	RDMT-T	TN6525	RDMT-T	TN6540	RDMW-T	TN6540
P3–P4	RDMT-T	TN6525	RDMW-T	TN6540	RDMW-T	TN6540
P5–P6	RDMT-T	TN6525	RDMW-T	TN6540	RDMW-T	TN6540
M1–M2	RDHT-T	TN6540	RDMT-T	TN6540	RDMT-T	TN6540
M3	RDHT-T	TN6540	RDMT-T	TN6540	RDMT-T	TN6540
K1–K2	RDMW-MH	TN2510	RDMW-MH	TN2510	RDMW	WK15CM
K3	RDMW-MH	TN2510	RDMW-MH	TN2510	RDMW	WK15CM
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	–	–	RDMT-T	TN6540	–	–
S3	–	–	RDMT-T	TN6540	–	–
S4	–	–	RDMT-T	TN6540	RDMT-T	TN6540
H1	RDMW-MH	TN2510	RDMW-MH	TN2510	–	–

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDHT-T	0,23	0,39	0,65	0,17	0,28	0,47	0,13	0,21	0,35	0,11	0,18	0,31	0,10	0,17	0,28	RDHT-T
RDHW-MH	0,23	0,42	0,88	0,17	0,30	0,63	0,13	0,23	0,47	0,11	0,20	0,41	0,10	0,18	0,38	RDHW-MH
RDMT-T	0,23	0,39	0,65	0,17	0,28	0,47	0,13	0,21	0,35	0,11	0,18	0,31	0,10	0,17	0,28	RDMT-T
RDMW	0,23	0,21	0,61	0,17	0,15	0,44	0,13	0,11	0,33	0,11	0,10	0,28	0,10	0,09	0,26	RDMW
RDMW-T	0,23	0,57	0,88	0,17	0,41	0,63	0,13	0,31	0,47	0,11	0,27	0,41	0,10	0,25	0,38	RDMW-T

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDHT-T	0,29	0,49	0,82	0,21	0,35	0,59	0,16	0,26	0,44	0,14	0,23	0,38	0,13	0,21	0,35	RDHT-T
RDHW-MH	0,29	0,53	1,11	0,21	0,38	0,79	0,16	0,28	0,59	0,14	0,25	0,52	0,13	0,23	0,47	RDHW-MH
RDMT-T	0,29	0,49	0,82	0,21	0,35	0,59	0,16	0,26	0,44	0,14	0,23	0,38	0,13	0,21	0,35	RDMT-T
RDMW	0,29	0,26	0,76	0,21	0,19	0,55	0,16	0,14	0,41	0,14	0,12	0,36	0,13	0,11	0,33	RDMW
RDMW-T	0,29	0,71	1,11	0,21	0,51	0,79	0,16	0,38	0,59	0,14	0,33	0,52	0,13	0,31	0,47	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDHT-T	0,53	0,90	1,52	0,38	0,65	1,08	0,29	0,48	0,81	0,25	0,42	0,70	0,23	0,39	0,64	RDHT-T
RDHW-MH	0,53	0,98	2,07	0,38	0,70	1,47	0,29	0,52	1,09	0,25	0,46	0,95	0,23	0,42	0,87	RDHW-MH
RDMT-T	0,53	0,90	1,52	0,38	0,65	1,08	0,29	0,48	0,81	0,25	0,42	0,70	0,23	0,39	0,64	RDMT-T
RDMW	0,53	0,48	1,41	0,38	0,35	1,01	0,29	0,26	0,75	0,25	0,23	0,65	0,23	0,21	0,60	RDMW
RDMW-T	0,53	1,32	2,07	0,38	0,95	1,47	0,29	0,70	1,09	0,25	0,61	0,95	0,23	0,56	0,87	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDHT-T	0,39	0,65	1,09	0,28	0,47	0,78	0,21	0,35	0,58	0,18	0,31	0,51	0,17	0,28	0,47	RDHT-T
RDHW-MH	0,39	0,71	1,49	0,28	0,51	1,06	0,21	0,38	0,79	0,18	0,33	0,69	0,17	0,30	0,63	RDHW-MH
RDMT-T	0,39	0,65	1,09	0,28	0,47	0,78	0,21	0,35	0,58	0,18	0,31	0,51	0,17	0,28	0,47	RDMT-T
RDMW	0,39	0,35	1,02	0,28	0,25	0,73	0,21	0,19	0,55	0,18	0,16	0,48	0,17	0,15	0,44	RDMW
RDMW-T	0,39	0,95	1,49	0,28	0,69	1,06	0,21	0,51	0,79	0,18	0,45	0,69	0,17	0,41	0,63	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDHT-T	.009	.015	.026	.007	.011	.018	.005	.008	.014	.004	.007	.012	.004	.007	.011	RDHT-T
RDHW-MH	.009	.017	.035	.007	.012	.025	.005	.009	.019	.004	.008	.016	.004	.007	.015	RDHW-MH
RDMT-T	.009	.015	.026	.007	.011	.018	.005	.008	.014	.004	.007	.012	.004	.007	.011	RDMT-T
RDMW-	.009	.008	.024	.007	.006	.017	.005	.004	.013	.004	.004	.011	.004	.004	.010	RDMW-
RDMW-T	.009	.022	.035	.007	.016	.025	.005	.012	.019	.004	.011	.016	.004	.010	.015	RDMW-T

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDHT-T	.010	.018	.030	.008	.013	.021	.006	.010	.016	.005	.008	.014	.005	.008	.013	RDHT-T
RDHW-MH	.010	.019	.040	.008	.014	.029	.006	.010	.021	.005	.009	.019	.005	.008	.017	RDHW-MH
RDMT-T	.010	.018	.030	.008	.013	.021	.006	.010	.016	.005	.008	.014	.005	.008	.013	RDMT-T
RDMW-	.010	.009	.027	.008	.007	.020	.006	.005	.015	.005	.004	.013	.005	.004	.012	RDMW-
RDMW-T	.010	.026	.040	.008	.019	.029	.006	.014	.021	.005	.012	.019	.005	.011	.017	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDHT-T	.019	.032	.053	.014	.023	.038	.010	.017	.028	.009	.015	.025	.008	.014	.023	RDHT-T
RDHW-MH	.019	.034	.073	.014	.025	.052	.010	.019	.039	.009	.016	.034	.008	.015	.031	RDHW-MH
RDMT-T	.019	.032	.053	.014	.023	.038	.010	.017	.028	.009	.015	.025	.008	.014	.023	RDMT-T
RDMW-	.019	.017	.049	.014	.012	.035	.010	.009	.026	.009	.008	.023	.008	.007	.021	RDMW-
RDMW-T	.019	.047	.073	.014	.033	.052	.010	.025	.039	.009	.022	.034	.008	.020	.031	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDHT-T	.014	.023	.039	.010	.017	.028	.007	.012	.021	.006	.011	.018	.006	.010	.017	RDHT-T
RDHW-MH	.014	.025	.053	.010	.018	.038	.007	.014	.028	.006	.012	.025	.006	.011	.022	RDHW-MH
RDMT-T	.014	.023	.039	.010	.017	.028	.007	.012	.021	.006	.011	.018	.006	.010	.017	RDMT-T
RDMW-	.014	.012	.036	.010	.009	.026	.007	.007	.019	.006	.006	.017	.006	.005	.015	RDMW-
RDMW-T	.014	.034	.053	.010	.024	.038	.007	.018	.028	.006	.016	.025	.006	.015	.022	RDMW-T

Recommended Starting Speeds [m/min]

Material Group		THM			TN6525			TN6540			TTM08			WK15CM			WP35CM			WS30PM			WS40PM
P	1	–	–	–	410	320	280	360	280	240	230	200	190	–	–	–	455	395	370	–	–	–	–	–	–
	2	–	–	–	320	250	215	250	190	170	195	170	140	–	–	–	280	255	230	–	–	–	–	–	–
	3	–	–	–	280	215	185	215	170	140	180	150	125	–	–	–	255	230	205	–	–	–	–	–	–
	4	–	–	–	235	170	145	180	130	110	160	130	105	–	–	–	190	175	160	–	–	–	–	–	–
	5	–	–	–	310	235	200	240	180	150	–	–	–	–	–	–	260	230	210	–	–	–	205	175	145
	6	–	–	–	205	160	130	160	120	100	–	–	–	–	–	–	160	135	110	–	–	–	180	130	95
M	1	–	–	–	190	120	80	130	80	60	–	–	–	–	–	–	205	185	155	270	240	220	250	205	170
	2	–	–	–	120	80	50	80	50	40	–	–	–	–	–	–	185	160	140	245	215	175	215	175	145
	3	–	–	–	125	80	55	85	50	40	–	–	–	–	–	–	145	130	115	185	160	125	175	130	100
K	1	120	90	75	275	245	220	220	205	180	–	–	–	505	460	410	295	265	240	–	–	–	–	–	–
	2	125	100	70	215	190	180	175	155	140	–	–	–	400	355	330	235	210	190	–	–	–	–	–	–
	3	130	95	60	180	160	145	155	145	125	–	–	–	335	300	275	195	175	160	–	–	–	–	–	–
N	1	900	600	500	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	685	465	385	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	450	280	200	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	50	35	30	–	–	–	–	–	–	–	–	–	55	50	35	50	40	30
	2	–	–	–	–	–	–	25	20	10	–	–	–	–	–	–	–	–	–	55	50	35	50	40	30
	3	–	–	–	–	–	–	70	40	30	–	–	–	–	–	–	–	–	–	65	55	35	60	50	30
	4	–	–	–	–	–	–	60	30	25	–	–	–	–	–	–	66	50	33	100	70	50	70	60	35
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Material Group		THM			TN6525			TN6540			WP35CM
P	1	–	–	–	1340	1045	925	1180	925	785	1790	1555	1460
	2	–	–	–	1045	830	710	830	630	550	1105	1000	905
	3	–	–	–	925	710	610	710	550	450	1000	905	805
	4	–	–	–	770	550	475	590	430	355	750	690	630
	5	–	–	–	1025	770	650	785	590	490	1025	905	830
	6	–	–	–	670	535	430	535	395	335	630	535	430
M	1	–	–	–	630	395	260	430	260	200	805	725	610
	2	–	–	–	395	260	155	260	155	140	725	630	550
	3	–	–	–	415	260	180	275	155	140	570	510	450
K	1	390	295	245	905	805	725	725	670	590	1165	1045	940
	2	410	325	225	710	630	590	570	510	450	925	830	750
	3	425	310	195	590	535	475	510	475	415	770	690	630
N	1	2950	1965	1640	–	–	–	–	–	–	–	–	–
	2	2245	1525	1260	–	–	–	–	–	–	–	–	–
	3	1475	915	655	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	155	120	95	–	–	–
	2	–	–	–	–	–	–	80	60	40	–	–	–
	3	–	–	–	–	–	–	235	140	95	–	–	–
	4	–	–	–	–	–	–	200	95	80	260	200	130
H	1	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–

Material Group

TTM08

WK15CM

WS30PM

WS40PM

P

1

750

655

620

–

2

635

555

455

–

3

590

490

410

–

4

520

425

340

–

5

–

560

475

395

6

–

490

360

260

M

1

–

890

785

725

690

560

460

2

–

805

710

570

590

475

395

3

–

610

535

415

475

360

280

K

1

–

1655

1520

1340

–

2

–

1320

1165

1080

–

3

–

1105

985

905

–

N

1

–

2

–

3

–

S

1

–

180

155

120

130

115

80

2

–

180

155

120

130

115

80

3

–

215

180

120

165

130

80

4

–

335

235

155

195

165

100

H

1

–

2

–

3

–

Welcome

Please confirm your preferences

Update Preferences

Product Suggestions

Product Family suggestions

Contact the Sales Team

Contact the Sales Team

Editing Solution

Adding Solution

Product Similar To: [Product Name]

M100 • Weldon® End Mills • iC10 • Inch

Weldon® End Mills • Inch

Features and benefits

Uses and application

Insert Selection Guide

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

Product Suggestions

Product Family suggestions

Contact the Sales Team

Notifications

Contact the Sales Team

Product Similar To: [Product Name]

Sending to {{cadTool}} in progress...

M100 • Weldon® End Mills • iC10 • Inch

Weldon® End Mills • Inch

Features and benefits

Uses and application

Insert Selection Guide

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

The following files are available